Jump to content
SAU Community

Recommended Posts

Hello friends
As the title says its time for me to sell my passion to get on track with my business ,which is not possible by keeping it .
Reason for selling is that i was on holidays for two months overseas and quit my job to start something else ,and now i am not driving it more often and theirs no point of keeping something that you don't use ,so here it is .

Black evo VIII -owned it for about 9 months now

No engine mods
odo reading ,92XXX
HKS Silent hi power cat back 6 months old
BC BR coilovers 4 months
Boost gauge
stock clutch
stock break discs
MR Bov
pu front lip
last serviced with indy, checked all oils and require front diff and engine oil change which i did
No revs ,no accident ,inspection most welcome.

planned to keep it long but things changed
asking price $24,000 nego
any queries contact [email protected]

post-76022-0-16561900-1363217518_thumb.jpg

post-76022-0-37188300-1363217521_thumb.jpg

post-76022-0-05844800-1363217522_thumb.jpg

post-76022-0-67496600-1363217522_thumb.jpg

post-76022-0-95042800-1363217523_thumb.jpg

post-76022-0-99936900-1363217524_thumb.jpg

post-76022-0-59932600-1363217525_thumb.jpg

post-76022-0-36744800-1363217526_thumb.jpg

post-76022-0-87608800-1363217526_thumb.jpg

post-76022-0-38764100-1363217527_thumb.jpg

post-76022-0-49729600-1363217608_thumb.jpg

post-76022-0-94467300-1363217611_thumb.jpg

post-76022-0-38369000-1363217615_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/421638-lancer-evo-viii/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

EVO8 prices have been going up at Japanese auctions recently - to the extent that your car is at a lower price than what some importers here are offering. Black is a great colour too.

I presume that there's absolutely no rust in the rear undercarriage quarters?

Have you advertised yet in evolutionOz or equiv?

Link to comment
https://www.sau.com.au/forums/topic/421638-lancer-evo-viii/#findComment-6806319
Share on other sites

It's already on EvoOz, Terry.

Looks clean and good price! Still recommend buyers take any import in for a pre-purchase inspection before buying.

I'll prolly cop a warning for this, but mind PM'ing a link to your 8MR build thread if you have one, Terry? :P

Link to comment
https://www.sau.com.au/forums/topic/421638-lancer-evo-viii/#findComment-6806867
Share on other sites

First of all guys if you dont have anything better to say ,just dont say it .posting warning for cars which you haven't even inspected .

i already have offers for 19 k and i want to sell it not throw it and would be happy to keep until the right buyer shows up.

Like i said buyers are most welcome for any inspection ,Absolute no rust ,will post more pics ,Car is advertized for less price considering " rego and odometer reading".and can keep 1 car in garage .so pls keep ur comments to urself

Link to comment
https://www.sau.com.au/forums/topic/421638-lancer-evo-viii/#findComment-6807332
Share on other sites

forgot to mention ,,it does have mangoose alarm and immobilizer and comes with two original keys from mitsubishiand does comes with receipt of whatever i put on car

post-76022-0-89138600-1365293821_thumb.jpg

Edited by gurpi
Link to comment
https://www.sau.com.au/forums/topic/421638-lancer-evo-viii/#findComment-6807339
Share on other sites

As Nick and Terry have said, this is a great car at a great price - knowing that there's absolutely no rust.

I saw an EVO VI at TSI for $23K and yours gurpi, is a much better deal > a bump from me as well as from Nick and Terry.

Link to comment
https://www.sau.com.au/forums/topic/421638-lancer-evo-viii/#findComment-6807449
Share on other sites

First of all guys if you dont have anything better to say ,just dont say it .posting warning for cars which you haven't even inspected .

i already have offers for 19 k and i want to sell it not throw it and would be happy to keep until the right buyer shows up.

Like i said buyers are most welcome for any inspection ,Absolute no rust ,will post more pics ,Car is advertized for less price considering " rego and odometer reading".and can keep 1 car in garage .so pls keep ur comments to urself

I dont think they were trying to have a stab at you mate, rather help you out and encourage you to keep your head up throughout the sale, whilst implying evo 8's prices have been rising in Japan, which means they shouldn't be dropping at such a progressive rate here.

Rust can be tricky sometimes and well concealed, I doubt they were saying yours is one of them, however they were supporting that fact by implying it is important to have any evo inspected professionally prior to the purchase, so both the buyer and seller are on the same page to aid in understanding and agreeing on anything that requires attention.

Nonetheless, looks like a very clean example, goodluck with the sale and hang in there!

Edited by GTR_77
Link to comment
https://www.sau.com.au/forums/topic/421638-lancer-evo-viii/#findComment-6807624
Share on other sites

Thanks guys for the kind words ,,and 100%agree with you Gt,,yeah may be i took it wrong way . buying a sports car is always pain ,most welcome for any inspection ,,,,if people want more info they can contact indy at is motor racing and meek ,,,must have car info in there system .

just checked this blue evo 8 on parr rd with a dealer ,,odo 90000 ,engine bay shit as hell ,wouldnt even started on the first go .priced at $26990.

Link to comment
https://www.sau.com.au/forums/topic/421638-lancer-evo-viii/#findComment-6807749
Share on other sites

Well mate i would say yes he did get a good deal at that time if the car was in this condition , i was not in mood to sell mine about a month ago,still not sure bcoz i know i wont get this clean car in the near future and also giving cheap .if it doesnt sell in next few weeks it will be packed .

Link to comment
https://www.sau.com.au/forums/topic/421638-lancer-evo-viii/#findComment-6811863
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
    • Unless my sensor just died, was only a couple months old, I strongly believe it didn't. How can I test it? I never mentioned it being 20:1+?
    • Well, you wouldn't use 2nd hand bearings out of another engine anyway....so just buying the proper bearings is obviously what you're going to do. The crankshaft would be common. The conrods might be common. There is essentially nothing else you would be able to use.
×
×
  • Create New...