Jump to content
SAU Community

Recommended Posts

Licensed 1990 R32 GTR gun metal grey that I personally imported from Japan in 2005. The car is licensed and comes with 6 months WA rego and was always well maintained with Motul oils and was tuned by Hyperdrive. I decided to sell the project due to poor health.

Since owning the GTR I had done a few modifications and decided to strip the engine bay etc for a full respray when some person decided it would be a good idea to key it all over. At the moment the engine , gear box and engine bay components have been taken out ready for a respray, all interior is still in place. The body is rust free.

The engine had no issues when it was in the car and had about 160psi in all six pots.

Modifications done so far are as follows:

Engine:

  • Tomei Type B 260 cams
  • Tomei cam caps
  • Sard 700cc injectors
  • K&N pod filters and pipe work
  • Spitfire coils
  • Garret 2860-5 turbos
  • Sard Ali racing radiator
  • Sard fuel regulator
  • Full Monty clutch
  • Trust intercooler
  • New CV joints and boots
  • Bosch 044 in tank fuel pump



Brakes & Wheels


Fully rebuilt front brake callipers
Stock R32 GTR Rims
New Brake Lines
Tein Super Street Coilovers
Nismo clutch slave

Electronics

Apexi Power FC and Hand Controller
Blitz Dual solenoid EBC has LCD display
Full White Nismo Dash & centre console


Not Yet Fitted

New rubbers, badges, seals and mouldings for whole car ( Over 2.5K+ alone)
Complete engine seal and gasket kit.
Spare front seats
New silicone hose set for engine

New genuine hose set for engine
Kakimoto dual exhaust
R34 Dump pipes ( better flowing then stock R32 items) "photo not taken yet"
Tomei 2mm oil restrictor
Fully refurbished R32 gear box "photo not taken yet"
Mines Baffle kit "photo not taken yet"
Tomei sump baffle kit "photo not taken yet"
GREX oil pump

6Boost Manifold for single top mount

New Garrett Gtx3582R

Nismo engine mounts

New handles

New handle surrounds

2.8L Fardon Stroker crank ( where HKS got their cranks ) Step two crank

Apexi intake kit

Arp head and engine bolts

ATI 1000hp balancer and pulley kit

Carbon fibre rear strut

DBA 4000 rotors

FC data logit

Pauter rods

new set of tein coilovers

And anything else I missed from list.

That's all I can remember for now. Car was never tracked, taken to drags or thrashed.
Chasing for whole package is $17,000.

NO SWAPS NO TRADES NO PARTING OUT

Rob 0413 670 040 or email [email protected]

post-25605-0-20721000-1363580958.jpg

post-25605-0-26953700-1363580965_thumb.jpg

post-25605-0-95457100-1363580965.jpg

post-25605-0-35765100-1363580966.jpg

post-25605-0-94447700-1363580966.jpg

post-25605-0-61396500-1363580967.jpg

post-25605-0-25812000-1363580968.jpg

post-25605-0-67544100-1363580968.jpg

post-25605-0-70361200-1363580969.jpg

post-25605-0-53092400-1363580970.jpg

post-25605-0-80544100-1363581043.jpg

post-25605-0-27797700-1363581044.jpg

post-25605-0-70706100-1363581044.jpg

post-25605-0-23036100-1363581045.jpg

post-25605-0-71883300-1363581045.jpg

post-25605-0-31011900-1363581046.jpg

post-25605-0-06429000-1363581048.jpg

post-25605-0-06877700-1363581049.jpg

post-25605-0-67133800-1363581049.jpg

post-25605-0-65716700-1363581050.jpg

post-25605-0-06956900-1363581142.jpg

post-25605-0-07699200-1363581143.jpg

post-25605-0-26692500-1363581145.jpg

post-25605-0-48562300-1363581146.jpg

post-25605-0-56830200-1363581147.jpg

post-25605-0-60579900-1363581148.jpg

post-25605-0-81894500-1363581149.jpg

post-25605-0-91344300-1363581150.jpg

post-25605-0-99766100-1363581151.jpg

post-25605-0-09902000-1363581153.jpg

post-25605-0-49748200-1363581210.jpg

post-25605-0-87492300-1363581210.jpg

post-25605-0-75364300-1363581211.jpg

post-25605-0-58014600-1363581212.jpg

post-25605-0-97435800-1363581212.jpg

post-25605-0-53195000-1363581213.jpg

post-25605-0-99473000-1363581213.jpg

post-25605-0-10782000-1363581215.jpg

post-25605-0-88166200-1363581215.jpg

post-25605-0-68186500-1363581216.jpg

post-25605-0-88014800-1363581314.jpg

post-25605-0-21993500-1363581315.jpg

post-25605-0-73827000-1363581315.jpg

post-25605-0-16258200-1363581316.jpg

post-25605-0-55888900-1363581316.jpg

post-25605-0-12232000-1363581317.jpg

post-25605-0-51609100-1363581317.jpg

post-25605-0-98197200-1363581317.jpg

post-25605-0-39342000-1363581318.jpg

post-25605-0-89881200-1363581318.jpg

post-25605-0-34652400-1363581357.jpg

post-25605-0-73246000-1363581357.jpg

post-25605-0-14937100-1363581358.jpg

post-25605-0-69046300-1363581358.jpg

post-25605-0-10314100-1363581359.jpg

post-25605-0-62224900-1363581359.jpg

post-25605-0-01875400-1363581360.jpg

post-25605-0-58515400-1363581360.jpg

post-25605-0-01743000-1363581361.jpg

post-25605-0-56445200-1363581361.jpg

post-25605-0-26678000-1363581380.jpg

Link to comment
https://www.sau.com.au/forums/topic/421870-r32-gtr-unfinished-project/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...