Jump to content
SAU Community

Rb26 High Mount Setup. Billett Turbo Gcg Manifold

ydr030
 Share

Recommended Posts

ydr030 Mentor

ydr030

Posted
Posted

billett sgt-3. 30/82 turbo.

prescision rear ceramic coated by high octane.

gcg stainless manifold.

flange has been cut. no leaks no cracks.

manifold has a 45mm flange on it.

turbo $800 ($2300 new)

manifold $400 (1100 new)

can do a complete setup if some one wants

45mm hyper gate/ lines. everything to make work

$1500.

chatswood

0419469108

can post anywhere for $25.

selling to help fund japan trip.

ydr030 Mentor

ydr030

Posted
  • Author
Posted

post-48133-0-56338200-1363678352_thumb.jpg

post-48133-0-66381000-1363678383_thumb.jpg

post-48133-0-80122800-1363678410_thumb.jpg

post-48133-0-86558200-1363678438_thumb.jpg

post-48133-0-61112900-1363678464_thumb.jpg

post-48133-0-73884300-1363678491_thumb.jpg

please note does not come with hks heat sheild (centermental value)

i deally id like to just sell turbo and manifold, but if someone wants the whole setup and the price is right then we can do.

  • 2 weeks later...
Joshbigt62r Proficient

Joshbigt62r

Posted
Posted

What size rear housing is this? Is the turbo a ball bearing or journal? When you say billet the compresser wheel is not billet the bearing and shaft housing is billet?

ydr030 Mentor

ydr030

Posted
  • Author
Posted

billet is the brand.(mr turbo) made in Australia. used by gas motorsports

.82 housing.

I dont have access at moment for more details but if u check there website "billet turbos" and search sgt-3 it will come up.

Basically runs a dual inconel bearing setup. allot better than conventional bearings.

its a mad turbo like I said im only selling because I need funds. Otherwise id keep it. turbo works well never had a problem

Joshbigt62r Proficient

Joshbigt62r

Posted
Posted

Ok I read up on them. Sound the goods. ;) is the rear 4 bolt or vband? Will you sell with oil and water lines? I have no use for the manifold as I've got a rb25. Fairly interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...