Jump to content
SAU Community

Recommended Posts

After much searching, I cannot get a straight answer.

Some folks use ATF, others say don't.

Some people say use Nissan Matic D, others say its not the same as "Nissan special power steering fluid"

So wtf is "Nissan special power steering fluid" ?

Read the following..as this was a persons communications with some fellas at Jap Nissan. As mentioned in this thread http://www.skylinesaustralia.com/forums/topic/58968-r32-gt-r-fluid-oil-flush/

Have seen this particular bit of info floating around on other forums too...

1. Transfer case fluid
Nissan Matic D is strongly requested because high torque is applied to
transfer unit.

2.. Transfer case (ATTESA E-TS-PRO Actuator) : It is not acceptable to use
DEXRON III fluid.
> Only Nissan Power Steering Fluid Special use is required.

Today I received the technical information from our design department.

1. The difference between the DEXRON III and Nissan Power Steering Fluid
Special

The viscosity characteristic of Power Steering Fluid Special is lower than
that of ATF DEXRON III and the resistance to wear is also improved.
Each viscosity is the same level at 100 deg.C and the former viscosity is
designed to have the lower value for under 100 deg.C than the latter
viscosity.
This characteristic is aimed to rotate an oil pump located in ATTESA PRO
actuator easily at the extremely low temperature (Around -30 deg.C or -40
deg.C)

2. What will happen if a customer puts DEXRON II or DEXRON III into the
ATTESA PRO actuator reservoir in the trunk ?

The 4WD performance will be largely decreased at the low temperature
because the viscosity value of DEXRON II or III is extremely high compared
to that of Power Steering Fluid Special ;
As the rising characteristic of 4WD torque transfer becomes worse, it takes
the longer time to transfer the driving torque to the front wheels. There
is a possibility that the 4WD cannot be achieved in the worst case.

So after reading that, I am just F****** confused,

What do you fellas use, what works, what doesn't?

Wanting to flush out the fluid thats in there and put in some fresh stuff in hopes it will stop my 4WD light from randomly coming on at start up as the fluid is very close to the min mark when the car is on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • EDIT: Just a little info what my tranny is "doing" :   For the long time the trans do this "bad" sound:https://www.youtube.com/watch?v=qs_iTXgDt40 It is literally the same sound and same symptoms(when i push the clutch it quites down) So is it really the shaft bearing?   Also:  i found this on forums: The RB20 and SR20 boxes are nearly indentical inside (rb20 has longer mainshaft)and suffer badly from bearing and selector failures when driven hard   The bearing is true and selector failure kinda too...it is "harder" to get into gears specialy when i drive a little bit hard...
    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
×
×
  • Create New...