Jump to content
SAU Community

Almost Run Off The Road.. Need Advice

t5iv

By t5iv,
in Queensland

 Share

Recommended Posts

PWND Grand Master

PWND

Posted
Posted

Yes.

Apparently ended up in internal disciplinary action for the driver, as it was not his first time.

He cut me off, drastically, so that I had to take evasive action. After I beeped, he then flipped me off and continued to do so up until I pulled over and attempted to gain entry to the bus. He mellowed out after that

PWND Grand Master

PWND

Posted
Posted

Didn't get touched.

Did you get hit?

My old housemate got rear ended, with the driver just driving off.

Ended up going through his insurance, but driver disputed it, claiming my housemate pulled into his lane, reducing his stopping distance

t5iv Grand Master

t5iv

Posted
  • Author
Posted

I didn't get hit. Stopped pretty close though. Thank gawd for ebc pads! The backs feel like they have flat spots and I'm also getting a lot of vibration from both rear wheels. Might give the insurer the heads up.

Edit: could be in for rotors and rubber if this resulted in some damage. Am also picking up some noise from the wheel bearings. It's too wet to go and check right now but will ASAP.

TTT Grand Master

TTT

Posted
Posted (edited)

similar thing happen to me... had to brake hard a swerve.

beeped, got the finger.

took photo on the plates and note of location.

reported it via email.

got a call the next day. complained more and informed them I'll go to the media.

Bitch got fired.

suck shit kunt!

Edited by TTT
t5iv Grand Master

t5iv

Posted
  • Author
Posted

lol... You braked hard to avoid an impact (as brakes are designed for) and now something is wrong and you think they should fix it?

lol... You got no chance mate.

sounds like your car was not road worthy if shit is broken from braking hard.

lol. It was 60 down to 0 very quickly,. All I'm saying is something isn't right. They've fixed wheels and tyres before when it;s been their fault. Shall hear back next week and go from there.

TTT Grand Master

TTT

Posted
Posted

If you hit a pothole and damaged a rim, I could understand that council may be liable (stretch but still maybe).

If you are driving along doing 60 and a grandma in a hybrid camry pulls out of her parking spot without looking and you jump on the brakes and do a little ABS skiddie and don't have an accident, but later you feel that the rear brakes are a bit weird, is it her fault?

I can't see how someone you "almost" had an accident with could be liable for something on your car failing when used as intended.

Just means that the now faulty part was not road worthy.

If you give first gear a push and hit the limiter, then the next day you find an oil leak, are you calling up Nissan?

mad082 Grand Master

mad082

Posted
Posted

i had a bus pull out of a bus stop and nearly take me out one day. i know you are supposed to give way to them etc, but he didn't put the indicator on until i had just passed the back corner of the bus and then just pulled out straight away.

talking to a mate who used to be a bus driver, or work in the management side of things (can't remember which), he said that drivers are supposed to wait something like 4 seconds after they put the indicator on before they even attempt to pull out. on the other hand though, he also said that with the new LED indicators on a lot of buses these days, they can take up to a few seconds to start to flash after the driver puts the indicator on. so that just screws everything up.

Ants Grand Master

Ants

Posted
Posted (edited)

I'm glad to hear no one got hurt.

Happens on the Goldie as well. Every time I see a bus at a bus stop I try immediately to merge into the other (right) lane if there is one as IMO they don't give a sh!t about you.

Yes, I understand they have a schedule to run and considering roadworks, school zones, etc... they are always under pressure to meet that schedule hence, why they are pressed for to make up time but at what costs?

HOWEVER.....just because we need to give way to them doesn't mean that they have to be arrogant and abuse it and more importantly tag innocent motorists because of that.

I'm certain its been brought up many times before with translink, Qld transport and other authorities, but bottom line is that justice does not prevail. In addition to that the public transport is already bad as it is

What they fail to realise is that if there is a severe prang resulting from such a situation NO ONE is better off as the bus will be reported in an accident, the passengers may be injured, the bus gets nowhere, passengers get nowhere, the car will be totaled and the driver will be mangled, and bus driver will be let off with slap on the wrist.

Its really about time theses bus drivers start thinking a bit more about safety of the passengers and other motorist instead of just a f@#king timetable which already late anyways.

There I feel better and I hope you do too.

Edited by Ants
Nissan Nutter Contributor

Nissan Nutter

Posted
Posted

To the people that said t they got the driver fired or disciplinary action taken against them. Do you actually have any proof of this happening other than a letter saying action has been taken?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      OEM Soko: Japanese business supplying Automotive items from Japan - Freebie inside!

      By Rezz · Posted

      We have some genuine Japanese legally decommissioned car number plates now in stock 🙂 Add some legitimately obtained JDM style to your Skyline or other Japanese model, or simply as a garage/man cave decoration! About the 40mm hole: The Ministry of Land, Infrastructure & Transport in Japan recognised the popularity of keeping decommissioned plates among car enthusiasts and came up with a method to "destroy" (or render them unusable for street use) while still retaining their collectable/usable value for display etc.  We have 40mm hole covers available to cover the hole nicely with a Sakura motif, which are also available in white in (very!) limited quantities, however they frequently sell out. Please let me know if you're wanting one or more of these and I'll check availability. The Sakura motif covers are more common. https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-su-7515 https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set https://www.oemsoko.co.jp/products/genuine-japanese-vehicle-number-plate-400mm-hole-cover *Please note that we can't obtain particular number or area name (eg: "Gunma 500 Fu ・86") if requested. All plates are provided as they become available after decommissioning. 
    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      Ah, fair enough. For the IAT, I'm using a legit GM sensor that was used on the car prior to my current build. I'll get another wideband and IAT ordered and follow up when they show up. Thanks for the help.
    • GTSBoy
      RB20DET lean on cold start

      By GTSBoy · Posted

      You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • A31Skyline
      Rb20e and RB20DET parts

      By A31Skyline · Posted

      yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
×
×
  • Create New...