Jump to content
SAU Community

Recommended Posts

Hi all,

Just wondering which one should cost more, a modded GTR or a stock GTR.

I have been told that it is good to get a GTR that has not had its engine opened...but again, getting a modded GTR means you get all the goodies...

Which one is the best to go for?

Thanks all.

Lav

Link to comment
https://www.sau.com.au/forums/topic/422426-mod-vs-stock-gtr/
Share on other sites

I spent a long time looking for a stock example, in the hope that it has had an easier life.

Paid a premium compred to what worked R34 GTR's would have cost me at the time, however I was more so after condition, rather than a half complete jig saw puzzle.

f**k that. Look for one that's been done properly, a searchable history, all the receipts, and where the car is known by a lot of people. Buying stock to just waste your life and money modifying with no return is not a good choice IMO. Find one done and done properly.

f**k that. Look for one that's been done properly, a searchable history, all the receipts, and where the car is known by a lot of people. Buying stock to just waste your life and money modifying with no return is not a good choice IMO. Find one done and done properly.

Amen to that. Saved myself a lot of money and hassle buying a modded car that was well looked after and getting it how I like it, rather than doing it myself. So it all comes down to what your plans are.

Also for the record, I really dont reckon km's are a gauge of condition.

different views...interesting...

i guess getting a modded one is valuable for the money and effort to run around and doing it on ur own but getting a stock one and do it up yourself is good as you know what you did and the parts you used, plus where it was done...

will like to know how many will go for modded vs stock...

Chime in to say I looked for stock because I wanted to reduce the risks and mod at my pace. Buying a modded one means you take the risks associated assuming it has been done correctly. Also, a modded car normally needs more attention and ongoing maintenance, attracts sometimes unwanted attention, and insurance issues.

In saying that I have kept my car the same as I bought it as I just can't bring myself to ruin her :)

A stock 32 would be worth more than a modded one I'd say these days.

Simple question; are you eventually going to modify the car or are you going to keep it stock for as long as you own it?

If the latter, buy stock. If the former, buy modified. Modifications add up farking quick when you do them yourself. Before you know it, you'll have spent what the car cost you, on mods alone. Whatever extra maintenance or repairs are involved in an already modified vehicle will pale in comparison to the cost of getting it there in the first place. Ask anyone who has poured thousands into their cars - they (myself included) will tell you that, if they could go back, they'd buy an already modified example. It's just not worth it in the end and only when your priorities change do you realise this.

Remember that a lot of people selling modified cars are just like you...these cars are their babies...so it does not necessarily mean the car has been thrashed or there's something wrong with it. People get bored and move on in life. I've had friends pick up absolute bargains over the years (220fwkw N14 pulsars for a few grand etc). On the contrary, if the modifications have been done correctly (poly suspension bushes for example), they can save you repairs you would have otherwise had to do on a stock vehicle.

Whatever you choose, just get it inspected thoroughly and try to find out as much info as you can. Buying from someone on SAU is a good start, as often you can find threads they've made about the car for repairs and modifications; see the history etc.

There is no way a stock GTR, that is going to be driven (ie non collectable) should be worth more than a modded car with a similar service history and condition.

There are very few 'stock' GTR's. If it 'looks' stock, it likely hasn't been in the past. Not always, but very likely.

It's no brainer, buy modified over stock any day.

If you chose to go stock route, thing breaks, you end up modify it anyway. May as well buy off someone after they'd pour $$$ on it before moving on and you just enjoy it.

I'd say make a choice based on what you want the car for.

If I wanted a toy, or track car, I'd be looking at something pre-modded.

Whereas I wanted a clean daily, so I went for a pretty stock option.

Also depends on yourself... I enjoy doing as much on my car as I can and learning in the process, whereas some mates aren't fussed and would prefer to pay a shop to mod.

Stock car has more chance of being reliable than a modded car if that matters to you.

That's a very broad statement. Stock cars can be even more unreliable, it's whether the car is looked after that determines the cars reliability. Not what mods it had.

Assumes that all stock cars are reliable / have been taken care of^

What if the car has been returned to standard for sale (as is the case with a lot of "never boosted" cars)? You wouldn't be able to tell the difference. So not only do you have the "unreliability" of a modified vehicle, but none of the bonus mods to go with it. And you probably paid more for an "unmolested" example ;)

People who buy 15-20 year old stock cars thinking they're more reliable than modified probably also believe the 80,000km on the dash are legitimate too, lol

That's a very broad statement. Stock cars can be even more unreliable, it's whether the car is looked after that determines the cars reliability. Not what mods it had.

This. Get any car checked out. Investigate any mods. My car is heavily modified and in perfect running order; better mechanical condition than 90% of GTS-T out there. There's 6-7k in bolt on mods alone, that could be removed and sold if you wanted it factory again. You'd be an idiot to pick a standard example over it, if both were going for the same price.

I've always bought close to stock and modded myself, that way you can do what you want and how you want it.

sure its going to work out more in the long run, but you can have it set how you want, parts you want.

at the end its down to personal preference..

and on stock being more reliable.. remember the JUN R33 lemon - clarkson drove it and mentioned it had never once broken down.. that thing was modded as much as you can get..

in my opinion you can normally pick up a stock one cheaper also.

though if you want to go the modded route and save $$ - buy already modded i guess..

defintly get a modded gtr. as long as compression test comes up good and no leaks youve got yourself a freak. ive seen cars thrashed for years and still going. then a car babied all its life then a bit of boost. nek minnit. fail

condition of body is most important

Oooo such an easy question to answer... if you plan to modify it, just go talk to any gtr owner - theyll tell you to buy a clean one that's already modified. You'll save a truckload of cash. I once read that you couldn't afford to own a GTR unless you could afford to buy 2. I've owned mine for 10 months, bought it with some clean mods and already spent another 20k on it which I'll never see again

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...