Jump to content
SAU Community

Recommended Posts

Ok I have had my fair share of fast cars in the past.

Was thinking today what sort of power would the vq require to light up all 4s from a rolling start?

I have been in fast awd cars where you plant it and its 4 wheel light up s down the street.

Link to comment
https://www.sau.com.au/forums/topic/422614-what-sort-of-power-for-crab-crawls/
Share on other sites

Rolling start? I can only do it in the wet, unless you had some really crappy tyres you would be struggling in the dry.

Mine chirps into 2nd and 3rd in the dry, but only due to the stupid line pressure the current box is running. It's surprising how much power it can put to the ground actually.

Rolling start? I can only do it in the wet, unless you had some really crappy tyres you would be struggling in the dry.

Mine chirps into 2nd and 3rd in the dry, but only due to the stupid line pressure the current box is running. It's surprising how much power it can put to the ground actually.

Whats your specs scotty?

I browse iff my phone so hard to navigate around here.

would depend on trans a lot, autos are a lot smoother,so its less likely to happen, manuals have a harder transition between

gears and upset tyres more, its the sudden shock that gets thems spinning in the first place, and once a tyres unloaded its

easier to keep it there

cheers

darren

c34 rs4s is 1650kg apparently

m35 should be around the same as it has a lot of alloy in it (block, rear subframe, bonnet?)

also my rs4s will do it with a big drop in the wet, i doubt an auto would do it in the dry without a huge amount of power

i went to drop off some scrap metal the other day, so i had to pass through tho weight bridge.

on exit when i unloaded the c34, it was me, my gf and bit less than half a tank of fuel and the car came in at 1720kg

So thats my factory stock rs4s no sunroofs no leather.

So if we minus, me 73kg, my gf, 45kg and whatever is left in the tank, 20l roughly

that takes the stagea to 1582kg roughly dry weight.

Still a bit heavy but ok

Mine was just under 2T on the Phillip Island track weighbridge, with two fat pricks (Aaron and myself) sitting in it, with a full tank. I have added a bit of weight with coolers and bracing, bigger brakes etc but the Bride seats are lighter than the stockies.

I just weighed Craig's old electric seats, they are 24kg each on the rails.

  • 4 weeks later...

Ok I have had my fair share of fast cars in the past.

Was thinking today what sort of power would the vq require to light up all 4s from a rolling start?

I have been in fast awd cars where you plant it and its 4 wheel light up s down the street.

I just can't see it happening in the dry without 500kw+, which I assume is difficult in an m35. straightforward obviously for a c34.

Mine happily wheel spins as it comes on boost in 1st, 2nd, 3rd and sometimes 4th on a hill or with a trailer on the back....as long as it is wet. In the dry it's hard to even chirp second.

My car is 1800kg with me in it - RB30, towbar etc. Can't see me spinning all four with quality 255 tyres - not prepared to dump the clutch in the dry as I would worry about breaking something before the wheels will spin!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha ha ha! I know those feels mate I've finally got the garage cleared enough that next weekend I'll do some actual work on my car (hopefully). Unfortunately garage isn't usable after 10am at the moment That said, I've done a lot of work this weekend on helping finalise a friend's Production Race car. Full started Christmas Eve. We're down to about 8 tasks on the list, including "get a wheel alignment". Sometimes it's just easier working on someone else's car or project than our own stuff 😛
    • Ha ha, ended up going it alone.  I just sent it (in a very nervous fashion).  Once I'd released the locks and it didn't automatically start spinning out of control i felt a bit more confident.   It made some loud sounds (cracking and creaking noises) when I first spun it which got the heart rate going again!  I couldn't bring myself to leave it tipped on the side.  I feel a bit more comfortable having back right side up while it sits there. I'd get angry with your last point but you're 100% correct! 😅 Even yesterday I managed to distract myself at numerous times to make a bracket to fit an LED flood light off the back of the house and fix my sons pushbike.  There were other little taks nibbling at my brain for the rest of the day too...
    • Probably one of the more nerve wracking experiences of my entire life! 😂😂 The balance (centre of gravity) is out still but in a direction that gives me comfort!   It's quite bottom heavy still meaning it takes a bit of muscle to rotate it.  The plus side of that is that it wants to to go back to upright.  Better that than wanting to go all stranded turtle on me!
    • hmmm that's not ideal. This is a pretty new engine right, will be interesting if your engine guy has any theories about causes
    • A universal ball joint removal c press kit is better money spent and will work for the Hicas ball joints.  Here's a 45$ CAD Example. ATPEAM Heavy Duty Ball Joint Press Kit with 4WD Adapters | Professional 4 in 1 Ball Joint Press Removal and Installation Tool for Cars and Trucks | Universal Ball Joint Tool with Storage Case, Ball Joint & Tie Rod Tools - Amazon Canada
×
×
  • Create New...