Jump to content
SAU Community

Recommended Posts

Breathing all good?

yea catch can v4 has done the trip

have not had to deploy the scaveng pump just yet

thats pretty good considering 12x12 minute sessions half at 15psi and half at 19psi

Did you throw in a fuel cooler??

yea i did in the end

fuelcooler_zps1b8723f9.jpg

on the 12 session i had the tank at 1/4 and did a session after 4 laps the secondary pump got noise and the ecu went into linp mode ( fuel pressure protection) so we know that works

restatr car with fuel and all fixed

  • 1 month later...

minor update

been working on these fckers for a while

i want more stopping power

so 996/7 porka cup calipers

380mm full floating rotors(off getting machined)

new brake line, new pads

custom hub adapters and billet dog bones

i was very happy they fit under the 18's

just buy about 7 mm

GRC_0223_zps639581dc.jpg

GRC_0224_zpse503c658.jpg

  • 2 weeks later...

rally sprint done and dusted

tops fun you guys should get out there

i almost died about 10 times

fastest time got me 10 out of 80

and more importantly beat the only other r33 gtr out there by 9 seconds( although he won a trophy for our class, should have checked they had me in the right class to begin with...lol)

my first ever youtube video check it... after it uploads

http://youtu.be/joAU_gEKMdA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I also built one, for a bit of a laugh. Pretty happy with it. Basically, obtained a clear garnish, painted it sanded back the paint off the letters, clear coated it. Inserted a 3cm EL strip through a slot I created in one end and sealed it up.
    • Apexi SAFC - AFC 1st Generation Rare Old School JDM As you can see it all lights up in the photos and is in 100% working condition. Has been kept in storage and boxed for years there won’t be to many like this if any! Especially with all original packaging and manual. price:$650   APEXi SAFC 2  In Complete Working Condition Refer To Photos and view the video provided.  Price:$500   Located Melbourne - Australia Wide Postage Available At Buyers Expense  IMG_6981.mov
    • wow so i just logged back in after buying the 33 and joining SAU, And I've got all a whole bunch of you wanting to know more, well unfortunately it still doesn't run i was hoping it was seized from a snapped timing belt as i turned it over by hand and it was fine and then it did a few revolutions and jammed solid when i was running it with the key, so the timing belt is mint, I've also found a lot of the parts I'm removing have already got bolts undone or not quiet tight enough to be unsuspicious. so the plan is to find a running RB30 block and chuck my head on it.  I have a habit of buying stuff I don't need or require so for my none running engine i have a forward facing plenum , Apexi power fc, 40mm Turbosmart wastegate, And for the car its self coilovers ,low seat rails and BRZ seats (black seats with red stitching i already had these and they are ADR Approved and allow rear passengers access)  
    • I took apart the dash and found this strange 2 pin connector. it dosen't seem like its factory or oem, any clue on why someone would add it and where it might have been connected too?    
    • Not mention a SS2 especially with that rear oddly small rear housing. I feel the Facebook mechanics and experts has led OP in the wrong direction.
×
×
  • Create New...