Jump to content
SAU Community

Recommended Posts

I have just bought my first skyline its a 40th anniversary GTST auto i want to increase power to 300kw at the wheels

I have been told the auto cant handle 300kw .How much should this cost to put a manual box in including the box and labour?

Also is there an honest tuner in Sydney who can increase the power and swap the boxes.I keep hearing their are not

any honest tuners in Sydney

Yes, well, that's why I asked. Because it means you have to pay for all of it.

Gearbag is $1k upwards. If you strike it lucky you may get a flywheel and clutch in the same deal. If not, then you're up for anywhere from $200 to $1200 for a second hand stock setup to a new lightweight flywheel and strong clutch.

You need a tailshaft. Could cost you a hundred or 2.

You need a gearbox crossmember. Could be anything from $20.

Need a clutch pedal and pedalbox. And clutch master. And clutch pipe/hoses. Could be a few hundred.

Could be a lot less if you buy a whole manual conversion from someone. You see them advertised for up to $2k. Whether they sell for that is another thing.

You need the engine-gearbox side wiring loom.

It will take a proper mechanic most of a day to get the old out and the new in and get the clutch bled and adjusted, gearbox filled with oil and test driven. That will cost whatever he wants to charge for that much time.

Thanks for the reply i have been quoted $3500 that includes refurbished gearbox and brand new clutch drive in drive out.

I am just trying to get a ball park figure so i am not taken for a ride.

The place that quoted me seems to really know their shit

So i think it should be a good job

Hi mate, you will end up with a lot betterand cheaper result by just selling your car and buying a manual. There are plenty of manual r33 gtst to choose from.

^^ exactly. . i tried auto to manual with a bluebird that i had, total PITA! just get a manual 33

$3500 sounds too cheap for the swap

^^ exactly. . i tried auto to manual with a bluebird that i had, total PITA! just get a manual 33

$3500 sounds too cheap for the swap

thanks for the advice i have decided to stay with the auto and have it strengthened +put a shift kit in.

Edited by Coatsy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
    • Got just the wing painted and fitted up to the existing boot. Big visual change and about time after having a GTR wing sitting in the shed since 2018 Headed up to Mallala with a quick obligatory stop in at Boliver OTR Oil control mods seems to have worked. I checked the catch can after session 1 and there was a dribble of water/e85 with barely any oil in it. After session 2 and 3 there was almost nothing and I stopped checking after that. so either great success or catastrophic failure/block of the external breather The GTR wing made a noticeable difference in the 160-185km/h sweepers. It was a very hot day for the cars at over 33C but the previously done cooling upgrade/ducting/water sprayers meant I never saw over 60C intake, 105C water and 100C oil and temps would drop back down very quickly once I shut it down. AD09's are a decent tyre but certainly and expectedly a step down when compared the the CR-S/AR-1 I have had on the car for years of track days. The handling characteristics of my car which I often describe using the Tony Hawks Pro Skater balance mechanic where either side of the center is understeer/oversteer was much more pronounced with no "green/safe" zone in the middle. However, imo it steers well/easily during oversteer largely thanks to the custom ACOSTAL front end. Enjoy a loose lap POV with my mate giggling away as a passenger.   Group photo for Peer Pressure Racing made it back home and gave it a wash Overall a great success compared to my previous two track days where i cooked the Starlets motor and blew up the new diff in the R32  
    • Nice. I'm looking forward to the updates!
    • Ayooo, been a while mates. I have a s2 r33 gtst and air stopped coming out of all the top vents.   My car has always made an actuator gear noise when turning the car on but that's a different issue I think? Did searches and am at process of thinking it's an actuator or some type of motor? I see a few different actuators and don't know which one. Would be nice to know if it was the one that's under the steering wheel so the dash doesn't need to come out.
    • Hi, just checking. Did you get this stuff made by Vspec Performance and at what price roughly? Looking into (sometime later) also getting such a intake kit, and Trust as well as HKS don't make a full set like this anymore.
×
×
  • Create New...