Avcr On My 33 Gtr

[OMGGTR]

Hi guys quick question if anyone knows

Is there a prefrence to which i put the purple wire

Can go to injector signal or rpm signal....

And if anyone knows at all is the series 3 gtr ecu pin locations different to s1 and s2 save me some testing time

Cheers

[OMGGTR]

Since im at it might aswell ask if this is the correct way of fitting the valve... do i just replace the old boost valve with the avcr one?

[Frosty]

no preference on the signal wire as far as im aware...as for the boost solenoid just replace where the old one was ensure the vacuum hoses are on the correct way...1 from the turbo and one from the gate...should have them marked on the solenoid so you know which one is which.

[GTR_JOEY]

If you have any troubles man, have a quick look at the manual.. Most of its in jap but you can figure it out from the diagrams

[STATUS]

http://www.skylinesaustralia.com/forums/topic/331145-diy-turbotech-boost-controller-install-for-gtr/