Jump to content
SAU Community

Recommended Posts

Hi all,

this has prolly been discussed a squillion times, but...............

what is the 'definitive' stock standard boost on a R33 series 1 (late 95 model)

GTS-t. This weekend I installed a Speco Boost guage and GFB Boost Ctrl.

Easiest fitment I have ever done in a car, ever. I installed Speco first so I could find the current PSI, (regardless if reading was right

or wrong, it would show me the exact difference between new boost and original setting). It showed 6psi, then after install went to 10 psi (1.75 turns).

Boost now comes in alot sooner (which I like) and comes on less 'linearly' (I also like).

Only issue was that the car 'popped' 2 or 3 times from the exhaust at around 3500 to 4000 rpm then is OK. This only seemed to happen when I really 'gave it to her', otherwise, all is teriffic. I wound down the controller by .25 of a turn, now indicating 9 psi, but 'popping' is very rare. (but still there if you really kick it).

Am I running too much boost? (Even if my Speco is wrong, I estimate a 3PSI boost regardless of actuall, by way of comparison).

I honestly thought that these

things

can handle 12psi, relatively well (?)

Is there any subsequent mods I should also perform after boost increase (although very small) to the car.

I do love what the GFB control has done, it feels faster, without going to far over the top. I am an 60 to

80 kmh driver, but like getting there quick.

Thanks, and please, I would like 'experienced comments on this one. (hate to sound like this, but hey, we're talking 'boost' here!!!

Mark

Your car is missfiring. No big problem. I had the same problem. 1st thing to do is check your spark plugs and change them if need be, that should fix it if not it could be your coil packs (not in many cases). Get your car on a dyno if its other things they can tell you from that. My problem ended up being that my Air Flow meter was maxed out only on 10psi so it can be a variety of thing. If you want to read more do a search for "missfiring" and read till you are content.

Your car is missfiring. No big problem. I had the same problem. 1st thing to do is check your spark plugs and change them if need be, that should fix it if not it could be your coil packs (not in many cases). Get your car on a dyno if its other things they can tell you from that. My problem ended up being that my Air Flow meter was maxed out only on 10psi so it can be a variety of thing. If you want to read more do a search for "missfiring" and read till you are content.

Hi Croat,

car was tuned by Genesis last week, with new plugs $26.50 each and AFM cleaned out aswell. Car was running perfect, so from what ur saying, extra boost changes the 'tune' or finds dodgey parts in your car. If I pulled the boost contoller out , will this miss-firing be gone?

Also Croat, you seem pretty certain on Missfiring, true, it does feel a lot like when I hit the rev limiter at 7000, but are you sure it may not be the sound of 'over-boosting'. This would really scare me!! Does an 'over boost' sound, sound like a 'rev-limiter' sound? Or when you over-boost is the only way to tell ........ is when your motor instantly blows up?

Just would love to know what noises are made when certain things are happening or about to happen. ...Croat......anyone..

I will check that 'content' as you suggested. thanx.

new plugs needed dude...

Thankyou very much, but sorry RB25, I just can't go with that. They're new and have been installed by 'the experts'.. (as per my thread).

I will come back to that if all else fails, or more ppl's back you up with the same.

Thanx RB25,

Mark

New doesn't mean good, I've bought dud plugs before.

Buy one extra one and start changing one at a time, only take you six days of going to work and back to test them all.

Or whip 'em out and get 'em tested at 10psi, good auto sparkies can do this.

regap the plugs to 0.8mm they are probably 1.1mm

Evan

ok.........so I take it that I'm not actually destroying my car by driving it at a displayed 9psi, and I hear popping from the exhaust? (occasionally when gunning it?) this is my MAIN CONCERN.

What's the principle (your theory) of reducing the spark gap?

I've rung my mechanic who did my plugs, he used Nissan Platinum plugs gapped at standard 1.1mm, I suppose, to be fair, I should take the plugs out and gap to .8mm (as he does on boosted cars). He did the plugs before I did the boost thing...so I shall do that (?)

So, even with a light boost, re-gapping is very important???

Thanx everyone, this truely is a grand site!!

Love an ansa to dis!!

if they are gapped at 1.1mm

then they can handle standard boost fine. I currently have Iridiums gapped at 1.1mm and running standard boost. No misfire etc Also did dyno recently, everything is perfect.

But i imagine that at 10psi etc u will definately need to change the gap

when running more boost the plugs definately need to be regapped in my experience, however i have heard it is hard to regap iridiums without breaking the tip.

I wouldnt use them as they are expensive and if the plugs arnt right it is a costly excercise to change, perfect for a stock car if you want them to last 100,000km, but if you start fiddling they are a waste of time and money in my opinion.

Evan

exactly what this bloke is saying. Im running 9-10psi and i regapped my plugs to 0.8.

Coppers all the way mate!! heaps cheaper than iridiums and with my car i need new sparkies no matter what brand at abotu 6000klms anyway so its no use forking the extra 80 for me.

Apparently the coating is meant to come off like someone said tho if u regap iridiums.

thankyou to all those above for your input. Looks like Croat and RB25 are on the money, Thanx for all the subsequant back up from other members.

One last Q on this one.....Do the standard Nissan Platinum plugs have one only electrode, so are they easy to gap to .8mm. Anything to keep in mind?

Ta again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...