Jump to content
SAU Community

Recommended Posts

Found that my check engine light will come on sometimes after prolonged periods of high revs (when drifting at track or last night for a short moment on a mountain drive).

When the light comes on I can't hear knock and the car does not run any differently. I also found that if I touch the accelerator pedal the light will go away straight away. After a drifting run the light is on if I let the revs drop down slowly the check engine light will disappear without me doing anything once the revs get below around 2500-3000.

It seems like a very strange problem and am just worried about causing damage to the engine more than anything.

I have:
Rb25det Neo
Full exhaust
Splitfire coilpacks
ARC FMIC
Nistune

also have but already noticed this problem before installing/tuning for:
z32 AFM
ATR43 G2.5
Bosch 023

Would the check engine light come on if there was a fault with the O2 sensor? Main reason I ask this is a long time ago the plug to my O2 sensor was badly melted yet it all seemed to work fine so I tucked it away from the exhaust so it wouldn't melt further and haven't really had any problems to indicate it isn't working under normal circumstances (I get normal economy for a r34)

Link to comment
https://www.sau.com.au/forums/topic/423037-r34-check-engine-light/
Share on other sites

i would put my money on that the o2 sensor is playing up / overheating

had the same issue with my R34, whenever i would take it for a spirited drive or a power run on a motorway i would get the engine malfunction light - replaced the o2 sensor, cleared the ECU, never had the error light come back since

would go with a genuine Nissan item which is available at kudos motorsports;

http://www.kudosmotorsports.com/catalog/nissan-lambda-oxygen-sensor-genuine-nissan-skyline-r34-25gt-25gt4-25gtt-rb25de-rb25det-neo-p-187.html

i would put my money on that the o2 sensor is playing up / overheating

had the same issue with my R34, whenever i would take it for a spirited drive or a power run on a motorway i would get the engine malfunction light - replaced the o2 sensor, cleared the ECU, never had the error light come back since

would go with a genuine Nissan item which is available at kudos motorsports;

http://www.kudosmotorsports.com/catalog/nissan-lambda-oxygen-sensor-genuine-nissan-skyline-r34-25gt-25gt4-25gtt-rb25de-rb25det-neo-p-187.html

Will give a new one a go I have a good idea that it is 90% likely the issue is from the O2 sensor and nothing else. Unfortunate the error code doesn't remain long enough for me to check it without a laptop plugged in like GTSboy recommends

I'm surprised no one has told you this already. Basically the 2 common ways are u can use a Nissan consult cable and hook it up to a laptop with the right program, or you can get the car to go into self diagnostic mode and spit out the code via flashing lights

I would have lent you my consult but Im in syd.

But the second flashign light method method is just as easy

Search for the Service manual online, or have a look at this thread.

http://www.skylinesaustralia.com/forums/topic/266512-reading-nissan-fault-codes-ecu-fault-codes-how-read-them

That should be enough.

Edited by sonicz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Certainly. It is probably broken under the wire style clamp. At least that one is easier to get at than the front one.   Sounds like it isn't a major leak, I'd start with backing off the the water feed and return banjos into the turbos half a turn then tightening properly. Hardlines can still crack over time, either in the tube (particularly when turbos are changed if the banjo is siezed in the the tube) or at the brazed joins between the lines and the banjo fittings. A coolant system pressure test will reveal all. BTW you'd be able to get a sump without exchange, it will just cost more as they will have to source another stock one for the next customer. If you want to address the sump a much better option is something like this https://www.hioctanedirect.com/hi-octane-racing-sump-extension-nissan-rb26 that you weld in locally (and add the oil return fittings at the same time)
    • Pretty sure you are thinking of the throwout bearing there (which you should change when you change your clutch), when they are worn they will get quieter if you put your foot on the clutch. An input shaft bearing is turning/noisy at all times.
    • I’ll have more of a look into Recaros over the weekend. It’s taken me 2 days to figure out which Bride seats suit my application haha.
    • I am aware of their presence, but the product page looked like that conversion will eliminate the AWD capability. Fact remains it's kind of a hassle to send my oil sump halfway around the world and buying an extra one is expensive and unnecessary. Before I go hat route I'd explore more local options.    Would you recommend I just pull the engine and renew as many things as possible since I'm already having problems with some leaks? Would have to get an engine crane first though.
    • Are there any indicators that the vehicle is in limp mode?  Any dash light, or something.  Or is it just lack of acceleration?
×
×
  • Create New...