Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 months later...
  • 1 month later...
  • 4 weeks later...
  • 2 months later...

Tune only running 23psi (boost controler off) made 470kw's

Ran out of legg 3 weeks ago 10.5 @139mph 1.9 60ft

Has a r32 gtr rear 4.11 ratio

So i got a silva diff that has 3.7 ratio and put my gtr center and half shafts in it and it works!!...home job coz no money....

Took to the drags last nite ran a 10.2 @141mph 1.9 60ft (got off the throttle off transbrake see the log)

Also wired up a switch to the link g4 for a log

Afted seeing intake temps sould think about upgrading me intercooler (justjap coolingpro 75mm thick)

Coming upgrades

Emtron egt modules and egt cuplings

Hypertune 600/300 100mm thick intercooler

TI 5bar map sensor

More boost

Buildnotbought

post-88690-14479055325066_thumb.jpg

post-88690-1447906214243_thumb.jpg

  • Like 1
  • 3 months later...
  • 4 weeks later...
  • 4 weeks later...

No one is to blame accidents happen

Thats life

Droped my car off at the start of january i droped my car in for a tune the person was moving it in the car park when the dip stick got court in throttle body couldnt stop the car and damaged the rear badly (driver hooked it to save the front leagend!!) Turns out dip stick poped out the block 3yrs owning it never had a problem oh well.tuner was very helpfull with sorting it out via insurace top bloke!!! .got a payout keeped the car the end

Found a red r32 gtst for $2000 no rego . stock rb20 with rb25 gearbox convertion

Justs need new front gaurds,gtr bonnet and front bar (which i am after) and a spray job

ef4bd9641c2ffc1bd9731c6b045a09d6.jpgfb3aaabaa66d3608e839fa85bc4fad0c.jpg

Today started started to stipped the motor etc ready to put my running gear in

Upload pic soon

Edited by D.s
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back in January, I noticed my car felt noticeably weak. I had the injectors cleaned, which seemed to solve the problem -- until now. Recently, the car suddenly lost power again while driving. Suspecting the injectors, I brought it to the mechanic. He recommended replacing them entirely, saying the current ones were getting unreliable and fiddly to work with. I could not find a direct replacement for my current injectors. The closest match I found were 440cc injectors. This led me to look into the possibility of upgrading -- and of course, that would mean remapping the ECU. From my research I found: The OEM Part numbers are 16600-72L20 and 16600-72L21 Both the RB20DE and RB20DET use the same 270cc injectors. There are much better options out there over the old OEM injectors. Nistune could be a viable tuning option. While the RB20DE isn’t explicitly listed on their site, the ECU is essentially the same as the GTS-T version - just with a different map. The ECU code on mine is listed as supported. One concern is finding a tuner who works with Nistune. Aftermarket ECU like Haltech and Link, but this would be the most expensive choice (and possibly overkill for a mostly stock RB20DE) I admit that I am very new to the tuning scene and would appreciate any insight or recommendations regarding this.   These are some SAU links where I got some of my information from for reference: https://www.sau.com.au/forums/topic/380324-rb20de-injectors/ https://www.sau.com.au/forums/topic/477396-factory-270cc-injectors/  
    • The inspectors are not forensic by any means but if you forge your documents and/or badgings on vehicle parts and are found out, the consequences are just far bigger than if you just run illegal parts. And their job quite literally is to cross reference what parts you got installed and what your papers say you got. Something as silly as your suspension being 1mm too low will fail you. Nonetheless I asked if someone knew the damn pipe and I certainly did not ask for smartassery or underhanded comments, no idea why you need to be told this. Great way to waste both our time.
    • As useful as you explaining what forgery is... But then again, I wasn't aware your inspectors were also forensic experts and inspect nameplates on each component to confirm everything is original. They must inspect roughly 3 cars a year at that rate. You're right though, my comment doesn't help you in anyway, so I'll go talk to my wall now. Cheers. 
    • Say that to the guy that is going to fail your inspection or tow your car for illegal exhaust modifications. If you have anything else useful to say, please go tell your wall.
    • You must be fun at parties. 
×
×
  • Create New...