Jump to content
SAU Community

N1 Block Done 30Kms Crazy Rb26 Head

sycorb
 Share

Recommended Posts

sycorb Mentor

sycorb

Posted
Posted

i had a oil pressure issue engine did 33kms or 13 laps of wakefeild park

was a brand new block has been bored and honed to 87mm,tunnel bored.it was bored to 87mm because i ran a stroker not because the bore was stuffed from the oil pressure issue

selling due to going back to a standard engine dont want to deal with engine builders anymore there all full of shit

$1800ono

Rb26 head has everything this head made 420awkw with -5's @22psi and made 410awkw with a precision 6266 @18psi comes complete with everything bolt straight to any motor was checked over,shimed overhauled 33kms ago

$5000

located in moorebank NSW

Link to comment
https://www.sau.com.au/forums/topic/423230-n1-block-done-30kms-crazy-rb26-head/
Share on other sites
Joshbigt62r Proficient

Joshbigt62r

Posted
Posted

Everything done can mean a million different setups. Could have 290* 11.5mm lift cams or 264* 9.7mm cams. What brand camshafts jun, tomei, HKS , kelford, camtech, custom grind. Could have double valve springs singles could have new standard sized valves or 1mm oversized valves. Could be any set up and if your got 5gs listed as the asking price I just think some specs would sell it a lot quicker. The list goes on. Only trying to help.

GTRNUR Grand Master

GTRNUR

Posted
Posted

I'm interested in the head also but I need all the details.

Valve sizes?

Does it include a ported intake balance pipe?

What kind of springs does it have?

Stock seats machined oversize, or copper beryllium?

Was it a new head then modified, or a reco head?

What is the combustion chamber volume size?

Are the cams R34, or R32/R33?

Who built the head, and do you have a machining/work/parts list?

Cheers,

Ian

  • Like 1
sycorb Mentor

sycorb

Posted
  • Author
Posted

I don't know those details. Abes built the head he maintained the BSM gtr and hes in Japan ATM looking after the tilton evo. wont get those details until hes back in Australia. im not a specialist so when hes back ill get a contact number you can ask him all the minor details

it was a used head when he rebuilt it

is from a r32 gtr

  • 3 weeks later...
  • 2 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 update from 1990's spec.

      By Duncan · Posted

      Great to hear you are bringing it out of the shed again. Unless you have specific issues I'd just add the wideband, get a good tune and enjoy it. Certainly no point changing coils etc if they are working. If would add fuel pressure and e85 sensor if you are doing a general update but not if it runs OK and you are just getting it back on track. The other thing is smaller, modern twins, -5 are OK for motorsport but pretty laggy and old tech for street use (of course, if performance is the priority a modern single with twin scroll manifold etc is the go but not cheap). The final thing worth considering is switching to an ethrottle if drivability is still an issue, it should make things a lot simpler and smoother
    • Duncan
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By Duncan · Posted

      Yeah pretty sure they are m4, but best to check, and perhaps use new hardware Also don't over torque them......there was that one time I lost an expensive engine after a workshop overtorqued one of those bolts and it ended up in the oil pump (no, I don't know why they removed the intake mesh either)
    • Komdotkom
      Compressor flow comparison table

      By Komdotkom · Posted

      I might have to shoot them an email. Pity the exchange rate is so bad at the moment. BTW, thanks for posting that table makes interesting reading. 
    • robbo_rb180
      R32 update from 1990's spec.

      By robbo_rb180 · Posted

      Add these Sensors -Wideband, Oil Pressure, Fuel pressure, Intake air temp Good inspection of ignition system of coils, plugs and loom (12v feed and good ground)- a r35 kit is best bang for buck upgrade. A decent tuner should be able to see any issues with the trigger system- a link has good filtering but a good simple upgrade is the nz wiring bolt in kit. Check and replace all the fuel filters- you would be surprised at intank filter after a few years. Also good to check for any leaks on vac hoses and pipe work as has been said. No need to go overboard and spend big $$$ to enjoy the car. A quality tuner is getting harder to find as anyone with a laptop thinks they are a tuner. A link has great features to check sensor voltages and frequency inputs and easy to see live by pressing f12. The link can do a TPS & RPM fuel/ignition mapping on ITB cars then add a 4D table with MAP and ability to add a 5D to it (can help with economy at cruise with wheel speed vs TPS) Where are you located as that will help narrow down a good tuner ?
    • Wazmond
      Stagea Automatic Box

      By Wazmond · Posted

      Reviving an old thread, I reckon my stagea is starting to slip. Car usually gets parked on a hill, narrow driveway so cant go up the driveway smoothly, anyhows, lately first gear feels "sluggish"? Not responsive. Feels like I gotta run the engine more than usual to get off the line...  Any recommendations for transmission servicing in Sydney? Or possibly just an excuse to go manual ?
×
×
  • Create New...