Help Please.. R33 Gtr N1 Ducts

[MillsyR33]

hey guys have seached as much as i can but cannot find what im after... need info if someone can give me the exact measurements on where to cut the holes in the front bar as i have genuine n1 ducts even if someone has an old smashed bumper ... please pm me or reply... thanks brendan

[GTR-N1]

PM "Brandon" who owns a R33 GTR N1

[MillsyR33]

thanks terry i did just then. wait and see how i go... thanks for you referral

[Ants]

PM "Brandon" who owns a R33 GTR N1

he is not going to be able to provide you with the measurements unless he takes off his genuine N1 ducts and then measure the bumper for you.....

What I did was look at a close up photo of an N1 bumper with vents installed and then did my own measurements from there like this

This is for an R32 GTR but you should be able to do the same for your R33 GTR.

And this is the end result after being painted and fitted with GENUINE N1 vents

Safest thing to do is get hold of a genuine N1 front bar and measure that or second best thing is make a small hole to start off with and slowly cut around until the N1 vents fit securely.

[MillsyR33]

thanks anthony for your help.very helpful. will report in the next few days. at the moment penciling it in it looks like itll be very close.

[Ant97GTR]

Not 100% certain but I'm pretty sure that the 33 ducts are a different size to 32 ones. Also not sure about your support bar for the front but it needs holes in it for the ducts - naturally the position of the duct in the plastic bar needs to match the posi of the holes in the front support.

[MillsyR33]

the reo is s3 33r so it has the cutouts factoy.thanks brendan