Jump to content
SAU Community

WTB: APEXI POWER FC+H/C & APEXI BOOST KIT FOR R33 GTR


Recommended Posts

Power FC & HC + boost controller for $1150 delivered

Hi,

Im not after the apexi boost controller anymore as a lot of people have advised me that they dont hold boost to well on GTR's. I can offer $800 C.O.D for the PFC & HC.

Thanks.

Guest two.06l
Im not after the apexi boost controller anymore as a lot of people have advised me that they dont hold boost to well on GTR's. I can offer $800 C.O.D for the PFC & HC.

Thanks.

another silly unsubstanciated claim on the forum

we run an apexi avc-r on staceys race car.we are currently running 25psi and it uses exactly the same solinoid as the power fc kit does.graphed the boost levels on croydons dyno and dont think i have seen a flatter boost line(dead straight on max boost).with her new turbo upgrade we are confident of upping the ante to 30psi.hope this has helped with your decision.

another silly unsubstanciated claim on the forum

we run an apexi avc-r on staceys race car.we are currently running 25psi and it uses exactly the same solinoid as the power fc kit does.graphed the boost levels on croydons dyno and dont think i have seen a flatter boost line(dead straight on max boost).with her new turbo upgrade we are confident of upping the ante to 30psi.hope this has helped with your decision.

Hi,

Thanks for your input. I was advised that its not to do with how much boost your running but to do with the springs in the actuator. With the factory actuators they start to open around 10-11psi so the boost controller struggles to hold more boost at stable levels such as 15-16psi. Correct me if i am wrong. I do appreciate other peoples opinions.

Guest two.06l
Hi,

Thanks for your input. I was advised that its not to do with how much boost your running but to do with the springs in the actuator. With the factory actuators they start to open around 10-11psi so the boost controller struggles to hold more boost at stable levels such as 15-16psi. Correct me if i am wrong. I do appreciate other peoples opinions.

yeah fair point we have hks actuators on that car.......but.last weekend we set an avc-r up on one of our other gtrs running stock turbo/actuators and works great at holding 1.1 bar and car ramps up to max quite quickly.the comment in this thread advised that it was the apexi that was at fault and this is not the case,as you have just pointed out.cheers and good luck with your setup.

I can see where your coming from. If i can find an apexi b/c with the pfc and h/c as a whole kit i guess i will still buy it, but if i come across a dual solenoid b/c before hand i'll get that. Thanks again for the info.

Guest two.06l
I can see where your coming from. If i can find an apexi b/c with the pfc and h/c as a whole kit i guess i will still buy it, but if i come across a dual solenoid b/c before hand i'll get that. Thanks again for the info.

no worries,any probs with the setup pm me as am glad to help out. paul (staceys pit bitch)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...