Jump to content
SAU Community

Rbe85 R32 Gtr Is Now Worlds Fastest H Pattern Radial Gtr

Nur33

By Nur33,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Nur33 Mentor

Nur33

Posted
Posted

It gives me great pleasure to announce that we are the New World Record holder for Fastest H-pattern Street Tyred GTR on the planet.

After coming so close to the record last year at the 2012 Brisbane Jamboree with a 8.97 sec pass, we were in good contention to take the record, but in drag racing things fail and 3rd Gear decided to throw in the towel after having a promising half track time. This only left us 0.02sec off Theo's time and making us ever so hungry to achieve that goal.

So we decided to head to Benaraby Dragway for the weekend for Round 3 of the CQDRA Championship to give the GTR a run. This is its first run since blowing the gearbox up at last years Jamboree in Sept. Now I really wanna give the guys and gals and Benaraby Raceway a huge wrap for the awesome event they held and the support they gave our car was unbelievable. The track condition was perfect, best I have seen if not better than Willowbank. They are doing a terrific job out there spending a lot a dollars to get that place up to spec. Great Job keep up the good work. ;)

Before I go into too much detail. I got to give our Main Man Mr Mark Jacobsen from Godzilla Motorsport a huge thank you, for all he has done for us, his support and knowledge has been unbelievable without his over the phone late night support that night this would never have been possible without him. Proud to part of the Godzilla Motorsport Team. Secondly another huge thank you to Dave Sheehy at CPV Tuning, for his continual help for the team, his valuable knowledge and input helped us immensely.

Ok to the runs, we not only broke Theo Woollett's previous World record 8.95sec @ 159 Mph which has stood for over 6yrs put we managed to back I up 4 times in a row, completely smashing it out of the ball park.

1st pass - 8.91 sec @ 152Mph with a 1.33 sec 60ft

2nd pass - 8.65 sec @ 150Mph with a 1.23 sec 60ft

3rd pass - 8.59 sec @ 152Mph with a 1.27 sec 60ft

4th pass - 8.52 sec @ 162mph with a 1.30 sec 60ft

With that said and done we are now gonna chase down the next record which is (correct me if i'm wrong) the CV Performance R32 GTR which currently hold the record at 8.47 sec. For the fastest radial GTR in the world with and gearbox setup. That puts us at 0.05sec behind, can we do it, hell yeah we can gonna be an exciting year stay tuned for updates.

Here is the pic of the golden ticket

923221_10151549364763485_1046025106_n.jp

And a couple of Vids:

Nur33 Mentor

Nur33

Posted
  • Author
Posted

Cheers for the support everyone, yeah would be great to be the World No.1 with a H-Pattern Box. Would be an amazing feat of engineering on our part, a lot of custom secrets in this gearbox, we must be doing something right.

Here's my favourite pic with the flames out the sides.

68510_4262661179821_1091432282_n.jpg

  • 3 weeks later...
  • 3 weeks later...
  • 4 weeks later...
  • 2 weeks later...
  • 2 months later...
White GTS-T Mentor

White GTS-T

Posted
Posted

http://www.speedhunters.com/2013/09/aussie-rules-straight-shooting-at-j23/#chapter-a-festival-of-fast

JAMBOREE_2013_4776-800x500.jpg

On the subject of records, another machine that set one at J23 was Matt Earl’s Nissan Skyline GT-R. With a 2.7-litre JUN-based engine built and tuned by Godzilla Motorsport, factory-based H-pattern gearbox and street-legal semi slicks on all four corners, the BNR32 blitzed the radial-tyred GT-R record when it went 8.39 at 164mph (264km/h). It’s rumoured that a US-built GT-R has run 8.28 since, in which case the Australian team now has a little bit of catching up to do. Given the way the GT-R seemed to effortlessly get down the quarter, I think it’s only going to be a matter of time before the Australian car steals it back.

  • Like 1
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GTR clutch master cylinder adapters

      By GTSBoy · Posted

      Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
    • joshuaho96
      R32 GTR clutch master cylinder adapters

      By joshuaho96 · Posted

      Not required but appreciated. Super Coppermix Twin even the non-competition model feels like the pedal is noticeably heavier than stock which was pretty well judged IMO. I'll be swapping in the Nismo operating cylinder soon to see how that feels.  Personally I haven't felt anything that justifies replacing the damping loop, at least compared to more modern stuff where the clutch delay valve is actually quite noticeable.
    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      He made that comment in my thread - In my case the vents ARE to lower engine heat, when the car is not moving, which is the only scenario I have heat problems with the aircon on, sitting in traffic, on 40C+ days. I can't imagine a scenario that this NC needs any at this point in time. I do not know if it will actually make my cooling when the car is MOVING worse, and I sincerely hope that won't be the case. If it does, well, um, f**k.
    • PranK
      MLR's Bogan cruise ship

      By PranK · Posted

      Nice, thanks. Thats why I was asking, there'd been a fair bit of discussion in the E90 world about vents and where it makes sense to put one (ie, over the filters is not great as that is inline or slightly behind the struts and in higher pressure area). I struggle with air flow and pressures. It sill weirds me out that a radiator in the boot can work. 
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      Neither really Vents, when located in the right place, will lower the engine bay "pressure", as air has a path to escape, thus lowering the engine bay pressure, thus.....improving the efficiency on the coolant stack (read: IC, condenser, radiator) This is why the Blits vented bonnet on my 33 worked so well, the vent was in the front 1/3 of the bonnet, which put it right after the radiator  If the vents are to far back toward the windscreen, which is a high pressure zone, it can actually force air into the engine bay, causing higher pressure and effectively loosing efficiency on the cooling stack, like the fab of raising the rear of the bonnet, which does allow heat to escape, but only when the car isn't moving  There's heaps of cool "fluid dynamics" info out there, but, I'll attach a video of a 'Merican joint that focuses on "Miatas" as I found it when looking into vents for mine, they explain it way better than me  
×
×
  • Create New...