Jump to content
SAU Community

Recommended Posts

Sorry mine is 2004 model with 70000k on it was due for first service so i was going to change all the oils . Was doing a bit of reading and some people are suggesting castro transmatic j is a exact same thing so i thought i might ask you guys first . But cheers !

Go to Jetwreck (Craig'S) workshop and get a Transgo kit installed, almost all the trans fluid is dropped during fitment, it's the best way to ensure the fluid and filter are clean, and your gearbox will love you.

Sorry mine is 2004 model with 70000k on it was due for first service so i was going to change all the oils . Was doing a bit of reading and some people are suggesting castro transmatic j is a exact same thing so i thought i might ask you guys first . But cheers !

If it is Matic J compatible, it will be fine to use (as will any other fluid that is Matic J compatible)

Would the transgo kit increase wear on the gearbox since the shifts are quicker?

Slower shifts cause more wear, but manufacturers opt for slower shifts because consumer usually want smooth shifts.

No.

The part throttle operation of the box is identical. It still shifts smooth.

On full throttle it shifts faster without the slurrrr.

The only harshness I've had is when the box kicks down itself to 3rd. Does it with quite a clonk. Benefits over weigh negatives massively.

Go for a ride in one. You'll see.

As Alex mentioned, the shift kit fixes the mechanical side of the shift, but the auto ecu is still an issue. Sometimes at full throttle the gearbox will shift hard but the engine isn't on power yet, this can cause a slight clunk. It doesn't happen very often.

At light load the shifts are quite gentle.

  • 5 years later...

There’s a lot of products out there that have replaced Nissan Matic J, for example you can use Penrite Multi Vehicle Full Synthetic ATF FS which is a new formula of transmission oil that specify for many other vehicle makes as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few more recent pics
    • full send the cnut, do this   fark the wrapping and/or stick on siet. These guys are the ones to go to: https://www.realthermo.com.au/  
    • Just had a look, they don't. Fuelling on the base map is purely alpha-N, and the ignition table is MAP. Remember it's just a base map to get the car moving  
    • Hi everyone, I’m Dave from Canberra. Here's a few pics of my 1992 R32 GTST coupe which I imported back in 2006. Only mods so far are HKS Hi-power cat back exhaust, K&N filter, ATC Volanti steering wheel, Pioneer stereo, amp and sub. This was my daily driver up until 2015 and sadly hasn’t been driven at all in the last 5 years due to marriage, work, and kids taking up most of my time and spare cash.As such its in need of a bit of TLC and one of my goals for this year is to get it back to running condition and maybe look into club/historic rego. I’ve joined SAU so I can ask a few questions along the way (although I promise to google Current Problem +SAU beforehand!)
    • From talking to the mx5 guys the NC doesn't actually need bonnet vents like the earlier NA and NB models, due to a better designed cooling system and undertray design There's plenty of them used as street cars and weekend track toys running anywhere from around 170 to 250kw with stock non vented bonnets, I initially was going to get some bonnet vents, but, as they are not actually required, I'll put vents on hold for a while and just monitor temps, though I do need to get something to actually monitor engine oil temps though, coolant temp can be pulled from the OBD2, but the oil gauge in the car is not actual oil temp, it is only a calculation based off coolant temp and RPM ☹️ They do recommend upgrading the radiator, which I have already done with a triple pass, and the only other thing they recommend for a street car is heat management, like I talked about above to protect bits in the engine bay from radiant heat, and to either replace the nearly 20 year old plastic coolant expansion tank, which I have done, or get a aftermarket alloy jobbie for some bling They did also say that if I wanted to track the car on occasion a oil cooler and sump baffle would be required, and as I already have had a sump baffle installed when the engine was out......... I'm going to get a oil cooler with a thermostat....... just in case I do eventually track the car, but probably not, but still maybe...🤪
×
×
  • Create New...