Jump to content
SAU Community

Making My Series 1 Stagea A Non Turbo

Malley

By Malley,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Malley Apprentice

Malley

Posted
Posted

hi everyone i need some information about making my series 1 stagea rb25det too a non turbo, its due too my partner she is on her ps and she really likes the car but cant drive it, so im needing some help on it, how much work does it take, and also what do i need to change? thanks guys

PN-Mad Grand Master

PN-Mad

Posted
Posted

Realistically, you need a rb25de motor,ecu, and all the other niggely conversion bits, exhausts etc. A de turboed rb25det is a horrible thought.

Or shoot for the exemption with the transit authority in your state, but your unlikely to get it. Buy her a $2000 corolla, cause she'll wreck it/ kerb it anyway.

Daleo Grand Master

Daleo

Posted
Posted

Doesn't work, rego authorities don't recognise your car in it's de-turboed state.

They will deem it to be turbocharged, and fine her accordingly.

Buy her something cheap, safe & reliable, and go from there.

gts_koop Enthusiast

gts_koop

Posted
Posted

Non turbo - turbo = win. Turbo - non turbo = super phagy time

Seriously though, how long does she have left on her restrictions? Not one to promote illegal activities, but if It's not too long, keep the car stock as a rock and she'll fly under the radar of the police 99% of the time.

If she ever does get pulled over, she can play the ignorance card...

Sorry I've probably been no help at all ¦p

66yostagea Grand Master

66yostagea

Posted
Posted

AFAIK the rules have changed now. With the RS4 my P plater got an exemption caus the kw/tonne of an RS4 is below the cut off. So by todays rules she can legally drive an RS4 25DET.

My son is still on Greens in the 32, rb20DET. Has been pulled over a few times and has never been quizzed.

Suggest you ask the local law.

If you still want to go N/A I have a 25G, S1, RB25E, N/A, auto, RWD.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...