Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

I should clarify, I really believe they need restrictors if standard oil pump but the garrett web site says oil should enter at 40-45 psi into the turbos my engine is nearly 40psi at idle and at 1500 would have been over the recommended limit but I will speak to garrett today about replacement chra.

Ok what a day I've had chasing this, no one in Sydney has cores or turbos for sale but repair if they do is $1150 ea, called crd to see if they had any and or restrictors which I was told is basically info they keep to themselves. Jez gave me rotomaster in Vic contact and they have new -5 for $1060 ea in gst but on the 2nd call to arrange it the guy asked about why etc and he severely doubts water would cause it so will inspect them and repair of my cores if possible with re balance etc around $500 ea or with new cores assembled and posted $760 ea. with restrictor it seems ppl get the upper banjo for stock applications from enzed etc weld them up and drill a .040 hole in it although there is a inbuilt one garrett recommend no more than 65psi max into their cartridges . The guy down there was very very helpful and probably the only person with stock of new turbos and replacement cartridges so a+ for rotomaster . Oh and it can be normal without balance pipe on for bb turbos to push oil oil due to imbalance pushing shaft slightly to one side which moves the circlip and they will leak, also hyper gear can re do them with bush bearings for $700 I hope all

This today will help

Someone in the future feel free to pm anytime for more info.

Scott

I know the maximum recommended oil pressure for a Garrett core is 65 psi but my VQ sits on 8-10 bar when cold, without a restrictor, and I have never seen any oil from either end Portaz.

Was it both compressor seals leaking?

Both turbos acted exactly the same some oil in front of compressor and some spitting from the outlet. This restrictor thing is crazy though u got anyone down there Scotty that makes them? Up here this stuff and id2000 injector seals etc is a big hush hush as u know.

Scott

Both turbos acted exactly the same some oil in front of compressor and some spitting from the outlet. This restrictor thing is crazy though u got anyone down there Scotty that makes them? Up here this stuff and id2000 injector seals etc is a big hush hush as u know.

Scott

Yep, I get them from either Proflow through the local wholesaler, or from Ebay in England if you can wait. (http://stores.ebay.com.au/Torques-U-K/Turbo-Flanges-/_i.html?_fsub=2445530012&_sid=81447352&_trksid=p4634.c0.m322) Both options will force you to run braided oil feed lines.

If you are still running the banjo setup, perhaps welding them and drilling a 1mm hole will do the trick? Or I could turn up a brass reducer for you on the lathe...

Perhaps r34 gtr banjo bolts are restricted? They run BB cores don't they?

Yeh, just express them down and I will stick a restrictor in them somehow. It still won't guarantee a pressure output, but it will lower the pressure. Who would even check the turbo oil feed pressure...

Apparently crd but f..k knows how I'm told enzed have them I will do some checking as I won't get my turbos back till end of week due to transport so I really need to install them this weekend so it's prob better to find a banjo that fits 10mm? Then weld a drill it as u said but I'd prefer to pay you to do that tbh

Ok so they got cleaned rebuilt and balanced etc seems there was some heat involved but mainly some rusty water still inside and the upper housing of turbine bearing was cracked possibly from last owner, seals were not leaking but leakage Due to imbalance by having Tt pipe removed which probably caused a few thou movement one way allowing oil to escape. $650 ea postage inc custom banjo for oil pressure. Interestingly though I considered going back to braided line but there are no restrictors in those fittings either and would be roughly 3mm hole unless there is a different kit to the one I have?

Scott

As reference my standard lines were stuffed by a retarded mechanic doing up the banjo bolts so tight that it crushed the banjos. I run braided lines coolant and oil and have no issue.

I can't really see how u will have excess pressure considering the drain is so large, there is no way pressure would build up in the core of the turbo wit a hole the size of the drain there.

Also you don't need to hook up coolant lines I have left them off before on some set ups.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...