Jump to content
SAU Community

Recommended Posts

Hi Guys,

I am having an issue with my nissan skyline r33 gtst.

I went to track days few times now and I get loss of power after first 5 laps. Power decreases significantly. At wakefield I can reach 175km/h on straight but after about 5 laps I can reach only 150.

So thats 10-20% power loss.

I assume this is because car is getting too hot.

Mods r34 intercooler, 3'' exhaust turbo back, boost controller 10psi. fuel pump.

-So far I have changed to use different oil from motul 8100xcess (10-40) to castrol edge 10-60.

-I flushed the radiator and put better coolant. I have not flushed the coolant in engine, the damn release screw is ridiculous to get to and unscrew.

-changed AFM, and fuel pump. so def not those and oh boy it drinks alot.

Any recommendations??

i bought the car of friend and he had the coils replaced few yrs back, i have his reciept.

well it has bigger intercooler, but i didnt want get front mount and restrict the radiator.

i suppose i should turn boost down and see if i still get the problem.

i bought the car of friend and he had the coils replaced few yrs back, i have his reciept.

well it has bigger intercooler, but i didnt want get front mount and restrict the radiator.

i suppose i should turn boost down and see if i still get the problem.

dont worry about restricting the radiator.... you have no where near enough power to do that.

my theory is after a few laps of full throttle you ic is getting warm. maybe try a front mount.

depending on the coils he put in they could also be breaking down due to heat.... remove cover if you can to increase air flow.

also if you have apod filter put standard air box back in. same thing happens as with small ic, filter starts sucking in hot air from engine bay and you lose power.

hey, thanks for advice.

i will lower boost to stock boost 6psi for next trackday, to see if it helps. That should show if intercooler is problem.

I removed cover for coils already.

the pod filter is just behind the light so that should get enough cold air in.

Do you think the old coolant in the engine could be the issue?

hey, thanks for advice.

i will lower boost to stock boost 6psi for next trackday, to see if it helps. That should show if intercooler is problem.

I removed cover for coils already.

the pod filter is just behind the light so that should get enough cold air in.

Do you think the old coolant in the engine could be the issue?

nah mate wont be coolant. unless engine is overheating...

that pod filter will not work.... unless you remove the light....

It would most definitely be the little side mount cooler as Paul causing your loss of power.

I remember my XR6 Turbo had the same issue with heat soak and the standard cooler.

As soon as I put a big front mount on it, problem solved.

Lowering the boost will help but then you'll just have that same constant low power.

this.

honestly. buy a standard airbox. alot of guys with nearly 300kw still run them. search if you dont believe me...

Or like mentioned before, remove headlight (easy enough to do in a couple of minutes at a track, a couple of plugs and some nuts), and put a headlight replacement air intake in place (just jap have them) and box off your pod filter. Induction cant get much colder than that.

+1 for heat soak. The 34 cooler might be an ok upgrade for on the street, but they are rubbish for the track. Put it on a dyno and after a few runs power will start to drop substantially. That is where a fmic is an upgrade. It doesn't give you any more power, but it increases how long you have power.

  • 1 month later...

hey guys,

i found what the problem was, too high boost, through my intercooler

i went to trackday on friday @wakefield park , and i lowered the boost from 11psi to 6psi, and this solved the problem. I did 10 laps straight and had no issues with loss of power.

most of time now i do 5 laps, then 1 slow lap, then repeat.

i think r33 has dual stage boost, as it goes up 6psi, but after 4-5krpm it goes up to 10psi, but i didnt have any issues.

anyways thanks for help, and do try wakefield park on weekdays, it was open track all day not many cars at all. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Convert to dual filament bulb   FWIW, it will look odd - I dare say a bit dumb as it looks like your flasher relay has shit the bed.
    • If the RB20 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
×
×
  • Create New...