Jump to content
SAU Community

Recommended Posts

Hey Guys,

Option 1 Garage quite often get steel wheels in in good offsets and sizes, but the size i wanted sold out already

The can get more in, but need a minimum order of 20 wheels to go ahead

The size i propose is 17x9 +15

They are usually around $120/wheel, but they said that the may be able to bulk discount and once they come in the'd be shipped to you for about $120/set

So all up around $600 for a set of 4 to your door and takes about 12 weeks from them receiving the last payment

Any takers?

Link to comment
https://www.sau.com.au/forums/topic/424925-group-buy-steel-wheels/
Share on other sites

yeah, it is a bit really

I noticed some of the drift cars running some that are a different design to the option1garage ones but its pretty hard to find out who sells them in decent sizes and offsets

Steel wheels weigh a f ton. I think most drifters run them in 16" as they are 4wd spec and come in good size and offset.

I know boost can get them in various styles. One of the guys there got heaps in for Silvia's and r31s. Fairly cheep buy can't rember what the final $ was

Or that bloke tyres with nowelsy. He's can get them I have heard.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know right. It baffled me. There's no way when the engine is off, key is in ignition, (coils are dissconnected aswell), also my sound system was dissconnected (I don't run any audio capacitors), battery reads 12.2v and with the 10amp fuse blown I was measuring 24 to 30v. The reading would move a bit from 30v to 24v which was weird. I took a pic of the multi meter reading 🤣: (This is a brand new single channel digital oscilloscope that also has a multi meter mode).   Before when the fuse was blown, I had one lead on the 12v supply (green/white wires) of that brown relay and the other lead on the negative battery terminal. When I turned the key on ignition (engine off), it would read 30v. Then when I removed that relay from it's plug and tried putting ignition on again, it would read 12v, but I think it's because it can't turn on the ecu now that I removed it. I asked Chatgpt and this is what it had to say:   Not sure if those theories would be possible but, any auto sparkies here? welcome to confirm. 🤷‍♂️  No idea, but if it happens again, atleast I know what type of issue it is, unlike last few months where I didn't know what was causing all my issues and I was just taking stabs in the dark to figure out what type of problem it was. If it does happen again I'm going to investigate futher and trace back the source even more and inspect more circuits. I drove it to work this morning and the car drove and boosted fine. Yeah I was thinking the same, so I've imported my back up saved map (which is the map that I saved when it got done tuning) back onto my haltech with the base fuel pressure set to 43.5psi.
    • Yeh nice, if your in melbourne could you recommend any exhaust shops in the east that do a good job?
    • Sorry yes, this is what im after Also, that jpjdm site appears to be offline
    • @Duncan Random side note, did the cops give you the driver/owners details of the taxi and then did Shannons give you a refund of the excess once you supplied those details?
    • Yeah to be clear I'm not naive, I'm sure all insurance companies are a bunch of arseholes who pay people bonusses based on the value of genuine claims they avoid....I just don't want to go back to one that has personally f**ked me multiple times in the past  
×
×
  • Create New...