Jump to content
SAU Community

Recommended Posts

all to suit R32 GTR, i dont know if it suits others, google does.

Power FC Dejetro with H/C - $1150
Blitz SBC ID-3 - $350
Defi 3 din gauge $550
HKS AFM-LESS Pipes - $300
Trust Hard Piping Kit Turbo Side & HKS Hard Piping Kit Intercooler Side - $650
Nismo 600cc Injectors, fuel rail and Nismo Adjustable FPR $650
HKS GT-SS with HKS actuators – $1,300
Tomie Dump Pipes (the old design ones which where the largest dumps you could get) $650
HKS Racing Front Pipe - $500
Genuine Recaro SR3 (black with red stitching) with genuine Recaro rails - $1,500
Nismo twin plate Copper Mix less than 1000kms on it) $2,000
Stock R32 GTR Intercooler - $150

text me on 0400 182 474 dont ask me what my lowest price is, text me an offer the worst i can do is say no. if you want a few items i will do a deal

prefer pickup in WA, may post, depending on item at buyers cost. post-85139-0-11292200-1368085272_thumb.jpg

post-85139-0-95270400-1368085278_thumb.jpg

post-85139-0-38379800-1368085555_thumb.jpg

post-85139-0-61150500-1368085561_thumb.jpg

post-85139-0-79721600-1368085566_thumb.jpg

post-85139-0-42508200-1368085576_thumb.jpg

  • 2 weeks later...

all thats left now is

Power FC Dejetro with H/C - $750

HKS Racing Front Pipe - $450
Genuine Recaro SR3 (black with red stitching) with genuine Recaro rails - $1,500 firm as they are in as new condition

9549k64_20_zpse3f7f254.jpg68059kf_20_zpsb32e0ac4.jpg8389cha_20_zpsf81ccf06.jpg

  • 2 weeks later...

Power FC Dejetro with H/C - $650

HKS Racing Front Pipe - $350
Genuine Recaro SR3 (black with red stitching) with genuine Recaro rails - $1,500 firm as they are in as new condition

bump price drop

Power FC DJetro, with hand controller (No DJ Harness $120 from RHD Japan) $550 - suits R32 GTR, R33 GTR and apparently R33 GTST with a VCT controller.
HKS Front Pipes suit R32 GTR - $250
HKS Hi-Power Cat-Back with decat pipe - $400 or $550 with the front pipes

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
    • I was surprised to see all the quick Jack models at the same prices on there. But yeah, grabbing one at 20% off would be great.
×
×
  • Create New...