Jump to content
SAU Community

R33 Gtr - Turbo Back Exhaust

a6491

By a6491,
in Engines & Forced Induction

 Share

Recommended Posts

a6491 Enthusiast

a6491

Posted
Posted

Hey guys,

Just wondering if it's possible to replace the front pipe on a RB26 using car ramps? If so are there any tips, tricks, recommended tools to use etc?

I would rather do it myself as I have the time and don't want to pay over $1000 for the local mechanic to fit them as I was quoted.

Any help is greatly appreciated, thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/425044-r33-gtr-turbo-back-exhaust/
Share on other sites
Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

Yes, it's possible to replace front pipes on stands or even just jack the rear end.

Just need extended socket to access the bolt on front pipe and some WD40.

a6491 Enthusiast

a6491

Posted
  • Author
Posted

haha, was Dyson Auto, they were good when doing my major service though. Others charged me $3,000+ for a major service, he was less than half that!

One place to name and shame is Ultratune. Went to get a quote and they said they wouldn't touch my Skyline. wtf!

LANDSCRIBBLE Mentor

LANDSCRIBBLE

Posted
Posted

haha, was Dyson Auto, they were good when doing my major service though. Others charged me $3,000+ for a major service, he was less than half that!

One place to name and shame is Ultratune. Went to get a quote and they said they wouldn't touch my Skyline. wtf!

the more they charge means the less they know about your car
StevenCJR31 Veteran

StevenCJR31

Posted
Posted

haha, was Dyson Auto, they were good when doing my major service though. Others charged me $3,000+ for a major service, he was less than half that!

One place to name and shame is Ultratune. Went to get a quote and they said they wouldn't touch my Skyline. wtf!

most places instantly double their rates when they hear the letters GTR or the word SKYLINE
Brandon Veteran

Brandon

Posted
Posted

As mentioned by others, the key to getting that front pipe out is the extension. Its a piss easy job when you have a hoist and proper tools. Anything more than 2hour labour is too much.

To be honest it might be too hard to DIY on the ramp as it can need a fair bit of strength (like breaker bar).

Dan from ERD used to be the go to for me but now that Dan's decided to shutdown the business, I've been bringing my car to Hi-Power Racing at Slacks Creek.

They just fit my engine & gearbox mount for around 350 too. I got a few quotes and prior but there was one, which is a very reputable workshop, told me it is a day's job. BS...

Can you normally judge how well they know the car by the labour hours. I'm sure theres odd cases where freaking bolt is crossed threaded, nut is seized blah blah

blah. But these are out of control.

101 is another place which is my other option but I end up at Hi-Power due to getting along with the owner. Let me know if you need a hand with anything, always there to help a fellow Skyliner.

Hey guys,

Just wondering if it's possible to replace the front pipe on a RB26 using car ramps? If so are there any tips, tricks, recommended tools to use etc?

I would rather do it myself as I have the time and don't want to pay over $1000 for the local mechanic to fit them as I was quoted.

Any help is greatly appreciated, thanks in advance!

haha, was Dyson Auto, they were good when doing my major service though. Others charged me $3,000+ for a major service, he was less than half that!

One place to name and shame is Ultratune. Went to get a quote and they said they wouldn't touch my Skyline. wtf!

Brandon Veteran

Brandon

Posted
Posted

most places instantly double their rates when they hear the letters GTR or the word SKYLINE

Or if they think you dont know anything and wanna rip you off. I was pretty disappointed with the quote (from said reputable workshop) I got for the engine mount since they're the one that tuned my car originally.

a6491 Enthusiast

a6491

Posted
  • Author
Posted

As mentioned by others, the key to getting that front pipe out is the extension. Its a piss easy job when you have a hoist and proper tools. Anything more than 2hour labour is too much.

To be honest it might be too hard to DIY on the ramp as it can need a fair bit of strength (like breaker bar).

Dan from ERD used to be the go to for me but now that Dan's decided to shutdown the business, I've been bringing my car to Hi-Power Racing at Slacks Creek.

They just fit my engine & gearbox mount for around 350 too. I got a few quotes and prior but there was one, which is a very reputable workshop, told me it is a day's job. BS...

Can you normally judge how well they know the car by the labour hours. I'm sure theres odd cases where freaking bolt is crossed threaded, nut is seized blah blah

blah. But these are out of control.

101 is another place which is my other option but I end up at Hi-Power due to getting along with the owner. Let me know if you need a hand with anything, always there to help a fellow Skyliner.

Cheers for the offer mate, greatly appreciated! If you happen to be in Prossy, come on up haha. But yeah I don't have access to a hoist, so car ramps, my mate, and a shit tonne of booze is the way to go. We have the right equipment so that won't be a prob. Living in a small town sucks to get any sort of help for my Skyline, hence the high prices, I did quote around in Mackay for major service and yeah, over 3k.. Unbelievable! I thought I got lucky with the dude at Dyson Auto, easy to get along with, had a knack for skylines too so I really couldn't complain, especially being local.. I just can't justify taking a day off work, driving down to Mackay or Townsville to get work done. Not at this stage anyway! I must say, first forum I've been on where there are minimal to no douche bags on here. Love it! Thanks again guys :)

Brandon Veteran

Brandon

Posted
Posted

Haha no worries mate. I didnt realise you're that far up north. I used to frequent Emerald (due to being in the coal industry) but has been in the office for a while.

SAU is 1 of the few forum you'll find decent tech info and help. I've been on this forum before I own a Skyline and people dont give me shit for asking question. Try searching for any problem you encounter in the forum and theres a high chance someone else before you had it before. Or even posting it and you'll find replies are generally pretty quick and help (sometimes make you think about stuff which you might have missed).

All in all, enjoy your stay here.

Cheers for the offer mate, greatly appreciated! If you happen to be in Prossy, come on up haha. But yeah I don't have access to a hoist, so car ramps, my mate, and a shit tonne of booze is the way to go. We have the right equipment so that won't be a prob. Living in a small town sucks to get any sort of help for my Skyline, hence the high prices, I did quote around in Mackay for major service and yeah, over 3k.. Unbelievable! I thought I got lucky with the dude at Dyson Auto, easy to get along with, had a knack for skylines too so I really couldn't complain, especially being local.. I just can't justify taking a day off work, driving down to Mackay or Townsville to get work done. Not at this stage anyway! I must say, first forum I've been on where there are minimal to no douche bags on here. Love it! Thanks again guys :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 gtt rb25det neo timing belt kit

      By GTSBoy · Posted

      Nissan/Pitwork is fine stuff. HKS is just marketing wank. I personally wouldn't do the idler if it is already new. If it looks and feels fine, it is fine. But as D says - it's cheap to add it to the job. The water pump ditto. Even more so. If it show no signs of problems, then it is nearly new - leave it.
    • Duncan
      R34 gtt rb25det neo timing belt kit

      By Duncan · Posted

      1. I can't see a location on your profile but you do mention GBP so I'll assume you are in UK. In Australia, CBC make a timing belt kit with the gears and idler and tension bearing and that is what I use without any problems. I'm sure OEM or HKS are also fine but I wouldn't pay extra for HKS over anything else. 2. Yes, I would always change the idler and tensioner and the stud and bolt that hold them in. Assuming they were all done last time it is highly unlikely you would have a problem, but they are very cheap to add to the job considering the time it will take anyway.  3. No, you don't need to lock them as such (I think that is more for engines without timing marks), but you should make sure they move as little as possible once the belt is off as you can hit pistons on valves if they move too far. As always, make sure you line it all up to top dead centre with the timing marks aligned before you take the old belt off.
    • The Bogan
      Boxes of oil?

      By The Bogan · Posted

    • MBS206
      Boxes of oil?

      By MBS206 · Posted

      How to wreak havoc at a bogans party... Swap out the goon bag hanging from the clothes line with oil bag... Watch chaos ensue during Goon of Fortune....
    • drifter17a
      R34 gtt rb25det neo timing belt kit

      By drifter17a · Posted

      Hey everyone,   I’m looking for some advice on replacing the timing belt on my RB25DET Neo-powered 1998 Skyline. The engine was fully built about five years ago, including a fresh timing belt, water pump, and other essentials. However, since then, the car has only covered around 2,000–3,000 miles. It’s currently making around 650hp.   Even though the mileage is low, I know timing belts have a time-based lifespan too, and most recommendations suggest changing them every five to six years or 50,000 miles. Since I’m at that time mark, I’d rather not take any risks and plan to swap it out soon.   A few things I’d like to hear opinions on: 1. What’s the best belt for this setup? Should I go with an OEM Nissan belt, or is the HKS fine-tune a better choice given the power level? 2. Would you bother replacing the idler pulley and tensioner at the same time, or only if they show wear? 3. When swapping the belt, is it necessary to lock the cam and crank gears in place, or is lining up the timing marks enough? I’ve seen different approaches, and I want to make sure I do it right.   The water pump was changed with the rebuild and isn’t run off the timing belt, so I don’t see a need to replace it again. I just want to make sure I approach this the right way.   Any insight would be much appreciated. Thanks!
×
×
  • Create New...