Push/pull Converter.

[iruvyouskyrine]

Hi all,

Mi purchased a pull type gearbox with an OS Giken push/pull converter in it. I am now wanting to remove the converter and run a pull type clutch again. The only problem is that it looks like the standard clutch fork was removed to install the converter. My question is what will I need to return my gearbox to standard to run a pull type clutch. I will need a clutch fork and carrier bearing or whatever it is called correct?

I also have a complete rb20det gearbox here that I can take parts from if I am able to use the clutch fork and carrier.

Thank you for any info you can give me.

PS, anyone want a OS Giken push /pull converter

[iruvyouskyrine]

Okay so i have managed to figure out what i need. I need the standard clutch fork and the pivot assemble that bolts into the centre plate of the gearbox. The push/pull converter replaces all of this. So i am after all this stuff ASAP as i would like to have my car running. Anyone with any info on where i could source these parts please let me know!

What are the best jap wreckers in sydney/melbourne?

[iruvyouskyrine]

Okay, managed to source some genuine parts from Amayama.com

The two parts you will need to convert gearbox back to pull type is Nissan Pt # 3053112U10 - Lever Withdrawl (clutch fork) and #30536AA50A Fork Support Assembly Withdrawl (the pivot point)

It cost me about $150 and a 2 week wait from japan. Image from FAST below with part numbers.

Search Tags: R34 pull type clutch OS Giken push pull converter