Jump to content
SAU Community

Recommended Posts

Hey guys, so i've got a r34 GTT. and with the help of this forum a few months ago i installed and tuned it. Pretty much my "system" is:

4 speakers - 2 front 2 rear

1 sub woofer

1 1200 W Amp - 4 channel

1 Head deck

.

I have amped the two front speakers to the amplifier's front ports

And i have amped the subwoofer to the amplifiers rear ports bridged.

the two rear speakers are connected to the head deck still.

On the head deck i have all bass settings set to as minus as they can get (to avoid the front speakers distorting from bass)

The amp has the gain for bass set at about 3/4 and for the front speakers at half way.

The issue is, I have bass when the system is turned up really loud, however, at lower or normal volumes there is no bass at all. I can tell the front speakers are trying to make a bass sound but dont. and the sub is pretty much not putting any bass through.

Any help would be appreciated, thanks heaps.

boss amplifier 4500 ( i know not a good brand)

bass boosted songs play great, however normal ones dont.

polarity is correct, and im in westmead. (NSW)

Edited by hop1308

Why don't you set the bass setting on the head unit to 0 and then set the gain on the amp accordingly?

Turn off all bass boost options (including loud). On the amp, set HPF for the front channel, set LPF for the rear channel. If you have the option of setting your rears as sub on your head unit, do it. Crank it up and tune accordingly (close all your doors/windows lol).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For something like this, I'd skip just going for the cheapest, I'd find the place with the best experiences people have had, especially for restoration work. Like everything, there is upholsterers, and then there is upholsterers. Some really great upholsterers for automotive restos won't even appear to have an online presence.   My guide would be find some of the old school classic cars that have been fully restored and are immaculate, and ask the people who own them who did the work on their seats
    • Might be tricky matching the seat trim material  If your got the funds you "may" want to get the rear re-trimed as well to match the front
    • How much is it to re-uploster?  Well that's a "how longs a piece of string?" question !  And I answer thusly: "twice half its length! " . . . . . .  Seriously you'll have to chase multiple quotes for that one from different uphlostrerereres !  Ask around, in your area and on the forums, chase reviews and most of all see the finished product in person cause photoshop is a wonderful thing !
    • Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
×
×
  • Create New...