Jump to content
SAU Community

Possible R&r? Only 10Psi, Happens Randomly?


Recommended Posts

Hey guys, I've had this problem for a very long time and i'm not too sure what it is, but it's pretty annoying.

I've got a R34 GT-T stockish, mods are:

- turbo back exhaust

- rb20 actuator, constant 10psi boost with no dual stage.

Anyways, the issue i have is, if i put my foot down completely on the throttle the car usually drives fast n fine, but sometimes it makes popping sounds from the exhaust region.

This problem is a lot more common when im on the highway at say 110km/h and i decide to put my foot down completely it'll pop and pop so much that any normal honda can get passed me.

I assumed it was R&R since its a stock ECU, but i've heard the stock ecu can take up to 1 bar of boost. this is only 10psi.

Any ideas on what it could be guys? and anyway to fix it?

Link to comment
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Could easily be R&R. The R34 ECU is no different to the R33 one in that regard (while being totally different in most other ways). 10 psi is enough to trigger R&R.

If you're loading it up in a high gear it will drag a lot of air in and if the AFM signal goes high enough the ECU will close you down.

One of the key differences between when cars do it and don't, and which cars do it and don't, appears to be the state of health of the AFM.

Link to comment
Share on other sites

Really need a bit more info but doesn't sound like R & R to me, more like plugs or coil packs.

R & R, you'd know, jerking will put you in the windscreen.

As the cooler months approach we'll see heaps of these R & R threads.

Link to comment
Share on other sites

hmm im getting confused now because when it pops the car doesn't jerk at all. it simply reminds me of those heaps worked cars shootting flames or the sound of hitting rev limitter in some cars.

but yeah it doesnt jerk at all, just pretty much cuts off acceleration for that second. and doesnt shoot flames or hit limitter

when researching this I came across something like afm cuttoff or something, dunno though.

what could it be?

Link to comment
Share on other sites

"AFM cutoff" and R&R are almost the same thing. "AFM cutoff" is more properly known at "TP limit". "TP" is the Nissan ECU term for the load signal. It's calculated directly from the AFM signal. There is a table in the ECU called "TP limit" that makes the ECU cut when you exceed a given TP at a given RPM.

On the offchance that it is your coils (and it's a reasonable chance) you should try a known good set (preferably newish OEM coils or a set of Splitfires - rather than any of the other aftermarket ones or old original ones) to see if that helps. But realistically, you have a Nistunable ECU. I wouldn't own it for another week without getting it Nistuned and onto the dyno. No need to put up with Nissan ECU shenanigans unless you have an R33 (and then you deserve sympathy anyway).

cheers

Edited by GTSBoy
Link to comment
Share on other sites

R&R is not the same as a hard cut. It runs rich and retarded so the car just makes no power. I have done datalog runs on my R33 and it hits R&R around 10psi and the car just has no acceleration. The engine is running smoothly (no popping, no jerking) it just makes no power.

popping or jerking = coil packs, spark gap too wide, AFM cut. it would only be lean pop if your fuel pump is shot or you have clogged injectors. not as likely as the other scenarios (coil packs, spark gap, AFM)

Link to comment
Share on other sites

I didn't say they were the same. I said "almost the same". I didn't elaborate on the distinction because I was only interested in explaining what TP cut was. Everyone should already know what R&R feels like.

The "almost the same" line is simply that the ECU has built in "protection" at certain levels and they all ruin the fun.

Link to comment
Share on other sites

okay wow this is a bit of a worrying issue then I guess. always thought it was normal and no big deal and assumed it was r&r or that afm cut off.

so I really cant afford a new ecu or even a tune. what are the chances that this is:

- r&r?

-afm cutoff

-sparks

and what is the risk im taking by not getting it fixed. or maybe most cost effieient method to fix?

Link to comment
Share on other sites

2 of the 3 things in jay-rod's list are free to fix.

1 of them is the cost of a set of new coilpacks (I'm saying that's $500 for a set of Splitfires).

Nistune installed (into your existing ECU - it's not a comlpete new ECU) and tuned is just over a grand.

I tend to think if people don't have enough cash to support these type of costs, then they shouldn't try to operate 15 year old turbo cars. It's like buying a 928 Porsche because you can get it for $15k, but forgetting that every job on a 928 costs at least $3k.

Link to comment
Share on other sites

Mine did the same tested on the dyno it was just going rich and not making power all I can run is 9psi it run smooth just makes no power it would go from 188kw to 100-120kw with 10psi so turn thr boost down and it will run fine

Link to comment
Share on other sites

well im just looking for advice on what to do from this point on. or better yet, the best method to determine exactly what's causing this problem.

is it worth changing my sparks? I was almost certain it wasn't spark related as it very rarely happens at low speeds whereas on high speeds it almost certainly happens

Edited by hop1308
Link to comment
Share on other sites

well im just looking for advice on what to do from this point on. or better yet, the best method to determine exactly what's causing this problem.

is it worth changing my sparks? I was almost certain it wasn't spark related as it very rarely happens at low speeds whereas on high speeds it almost certainly happens

Problem: Running more then stock boost. Ecu thinks there is a overboost (aka rR&R)

Solution: Run stock boost, or buy a aftermarket ECU or install Nistune..

Link to comment
Share on other sites

gtsboy sadly im not sure what those mixtures are.

even worse, last night I was beaten by a gti r off the launch and even off second. and then I noticed that this problem occurs at all speeds now.

my best description is, that it isnt a loud pop but its half loud. and I lose all acceleration at that point.

ive come to realsie this must be fixed, so all legitness, is it ecu or spark plugs/ coils related? cause im getting all different answers here, and I can only afford to fix it once.

thanks heaps for all the help guys, id be lost without it

Link to comment
Share on other sites

I think the fact of the matter is that with 10psi you at hitting around the 200kw mark and at this level its time for

- coilpack replacement ( highly likely)

- nistune or aftermarket computer

- tune

so 2 options

- restore to factory boost and get your butt kicked by gti r's :verymad:

- open wallet and spend $$$ and kick some gti r's and smoke tires while doing it lol :woot:

most opt for the open wallet option ;)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




×
×
  • Create New...