Jump to content
SAU Community

Recommended Posts

For Sale is my beloved GTR.

It has all the stuff you need, it has an Apexi Power FC with hand controller, Greddy Profec B II Boost Controller, RS*R exhaust, Splitfire Coil Packs, Rear GT wing, DTM18" Rush shadow chrome rims, Adjustable caster rods, Blistien front shocks, Sparco Racing drivers seat, Blitz BOV, Sound System, and HID kit.

It has done a touch over 151,000kms, serviced every 5000km.

The paint work on it has a couple of blemishes, but its the only thing wrong with the car. It's a pleasure to drive and has plenty of potential to be a very quick car.

Currently makes 186awkws which is quick on the street, as this is my daily driver. Please no swaps, I have a deposit on another car. I am going to be quite firm on this price as need the cash to fund my next car. And will throw in all my spare parts for the car. They will not be sold seprately:

- R33 Crankshaft

- Forged Pistons

- SARD 700CC Injectors

- Full Genuine Nissan Engine Gasket Kit

- Nismo Fuel Reg


A deposit will be taken for serious buyers.

The car is situated in Richmond / Windsor area in NSW - And I can be contacted on 0400629822 or via PM or email [email protected]

I also made a video walkaround, which I can send a link if interested.

The price of the car is $12,800.

Cheers

post-87170-0-52423900-1368695581_thumb.jpg

post-87170-0-39056500-1368695604_thumb.jpg

post-87170-0-45024400-1368695625_thumb.jpg

post-87170-0-64337100-1368695642_thumb.jpg

post-87170-0-05080400-1368695663_thumb.jpg

post-87170-0-48799300-1368695741_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/425383-fs-nsw-1990-nissan-skyline-gtr-r32/
Share on other sites

Yeah the tune is conservative for reliablility. It has more potental for power and the new buyer will easily be able to unlock it with a better tune.

Thanks mate, appreciated.

  • Like 1

Yeah the tune is conservative for reliablility. It has more potental for power and the new buyer will easily be able to unlock it with a better tune.

Thanks mate, appreciated.

They come factory at 205kw so that would be safe and reliable! why down tune such a beautiful creature?

Its at the wheels. So its making a bit more power then stock.

I wanted to build it up over time, but money always being the key, I just cant do it anymore. I wanted it always to be safe power until it was built. Now it can be someone elses little project :)

They come factory at 205kw so that would be safe and reliable! why down tune such a beautiful creature?

Standard R32 GTRs with stock 10psi boost should make around 160kw at the wheels. 206kw is at the fly wheel figure.

I'm not a professional when it comes to tuning. I know the tune can be a lot better, but I know I won't blow anything up.

Plus I think its gotten a bit off topic, I'm trying to sell it as I have another car ready and would like to find a good home for it.

I'm not a professional when it comes to tuning. I know the tune can be a lot better, but I know I won't blow anything up.

Plus I think its gotten a bit off topic, I'm trying to sell it as I have another car ready and would like to find a good home for it.

sorry, didnt mean to come across talking down, rather, just another line of thought.

could you swap the factory injectors and ecu back in for a higher/factory power figure?

sell the other parts separately?

either way, its a cheap price.

glws.

Let the bloke sell his car cmon

Thanks man, its ok. Atleast they are talking about it lol.

sorry, didnt mean to come across talking down, rather, just another line of thought.

could you swap the factory injectors and ecu back in for a higher/factory power figure?

sell the other parts separately?

either way, its a cheap price.

glws.

Those parts are not in the car and not tuned for it. It was apart of the plan.

I want the car gone, and I hope the parts are a good sweetner.

Cheers man, it hasn't been too good of luck so far :P

I'm not a professional when it comes to tuning. I know the tune can be a lot better, but I know I won't blow anything up.

Plus I think its gotten a bit off topic, I'm trying to sell it as I have another car ready and would like to find a good home for it.

Like I was trying to tell the others who commented about the "low power figure". Stock R32 gtr makes around 160awkw on stock boost. So the power your car makes is completely normal. Good luck.

Standard R32 GTRs with stock 10psi boost should make around 160kw at the wheels. 206kw is at the fly wheel figure.

Standard R32 GTRs with stock 10psi boost should make around 160kw at the wheels. 206kw is at the fly wheel figure.

SHhhhh Im trying to ask the SELLER a question! I dont want to know about specs I want to ask the SELLER a question Ta Ta :)

Edited by Memphisxxx1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't be ridiculous. "2-3 ugga duggas or one Oof. You have to use Oof on tie rods because you can't get an ugga dugga on there." Is not helping the guy at all.
    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
×
×
  • Create New...