Jump to content
SAU Community

[Qld, Bris] Rb25Det Performance Parts – Powerfc With Hc, Datalogit, Z32Afm Brand New With Plug, S15 Injectors (480Cc) X 6, Innovate Lc1 With Gauge,


Recommended Posts

All,

I have the following parts for sale as I decided to keep the car stock.

R33GTST PowerFC with Hand Controller (Complete in box) - $950. Used but in as new condition (small scratch on HC screen - refer pic taken at worst angle, not noticeable when using it). Comes with a few tunes but best to do your own to suit.

post-11777-0-68749700-1368949898_thumb.jpgpost-11777-0-95750500-1368949899_thumb.jpgpost-11777-0-86223500-1368949901_thumb.jpgpost-11777-0-00444400-1368949903_thumb.jpgpost-11777-0-62735700-1368949904_thumb.jpgpost-11777-0-13641000-1368949906_thumb.jpgpost-11777-0-65831500-1368949907_thumb.jpg

Datalogit with CD and RS232 convertor - $240 (Used but in As new condition)

post-11777-0-00346200-1368950011_thumb.jpgpost-11777-0-35621700-1368950014_thumb.jpgpost-11777-0-00771800-1368950016_thumb.jpgpost-11777-0-30840700-1368950018_thumb.jpg

Z32 AFM Brand new complete with correct Z32/VL plug - $250 (Brand new in box)

post-11777-0-40171700-1368950131_thumb.jpgpost-11777-0-83762100-1368950134_thumb.jpgpost-11777-0-31726700-1368950137_thumb.jpgpost-11777-0-38063600-1368950139_thumb.jpgpost-11777-0-40478200-1368950141_thumb.jpgpost-11777-0-37327400-1368950143_thumb.jpgpost-11777-0-62725300-1368950145_thumb.jpgpost-11777-0-09990300-1368950148_thumb.jpgpost-11777-0-24259200-1368950151_thumb.jpg

S15 Injectors 450cc x 6 - $400. I also have brand new seals to go with these if you need them (24 in total). Nissan price is about $3 each. I will do the seal set for about $25 total. Or $420 injectors and seals package.

post-11777-0-35744600-1368950221_thumb.jpgpost-11777-0-90281000-1368950223_thumb.jpgpost-11777-0-07610400-1368950226_thumb.jpgpost-11777-0-94086300-1368950228_thumb.jpgpost-11777-0-29412700-1368950231_thumb.jpg

Wideband O2 Sensor kit - Innovate LC1 Complete kit with gauge – Used but in great condition $160. Only used briefly for about 2 months

post-11777-0-28958200-1368950297_thumb.jpgpost-11777-0-33836600-1368950300_thumb.jpgpost-11777-0-17722500-1368950303_thumb.jpgpost-11777-0-36582500-1368950308_thumb.jpgpost-11777-0-83618700-1368950310_thumb.jpgpost-11777-0-77944500-1368950314_thumb.jpg.

Prefer Local pickup. I am in Brisbane city

post-11777-0-96679000-1368950305_thumb.jpg

Edited by benl1981

PowerFC SOLD

Will take

- $370 for the 6 x 480cc/min S15 injectors (Or $400 with 12 x brand new nissan seals)

- $200 for the datalogit with RS232 to USB convertor etc

- $140 for the Wideband 02 kit

Will do

- $370 on the injectors INCLUDING new Geneunine seals worth over $40.

- $180 on the datalogit

- $135 on the wideband kit

hey mate keen on datalogit and innovate lc1 with guage. please txt me on 0405639821 as im not on here often

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That specific one would be an exchange part, meaning I'd have to send mine to them. Plus it looks like a non AWD sump, which won't work for me. There is one or two shops in my country that I can ask to do a sump extension job and it'd most likely end up being cheaper than sending mine to AUS or NZ and getting one back, and quicker too.
    • Rear turbo is leaky, most likely at the oil drain. From what I could see with my boroscope it seemed to have seeped out at the very top of that return hose. Is it possible that the oil climbs up that hose to then leak out? Yup, coolant leak on the hot side of the engine, only noticed after seeing clear rusty residue in the block right from the turbo oil feed downwards to the pan, and red droplets hanging from the pan. No clear sign yet from where it comes, and most of the lines there are hardlines right? Last year, seeing those red drops, I thought it was power steering, will be glad if that is not leaky at least. Another leaking hose I found by chance is the lower of the two heater core hoses coming from the firewall to the back of the head. That one is not too bad to get to if I have to replace.
    • I think for response I'm already kind of out there no? he -5s are not the best pick for that as the Internet tells me. Maybe I should switch to -7s while I still can? Though that almost definitely warrants an engine pull along with the other issues I have.
    • Which I agree with. I don't want or need a high hp straight line car, I want it to be fun on the road and nothing more. Hence why I said my max power goal will be around 500 crank. The few times I drove the car last year I didn't even use high boost and it was already quick enough for me, should have been around 380-400 crank I think (2860-5s at 1-1.1bar).
×
×
  • Create New...