Jump to content
SAU Community

Recommended Posts

Howdy,

Up for sale the following bits purchased with project car which are no longer required most bits are new and never used unless specified. Also have a heap of bits from R32 and R33 wreck so let me know if you need anything.

6 boost genuine steampipe exhaust manifold to suit RB25

BRAND NEW (manifold was built to suit RB25 in R32 - compact design - but will be prefect for any R32 or R33 with an RB25)

Work of art to Suit RBb25 head stud pattern

T3 flange

50mm v-band external wastegate flange

NEW never used

$1100 plus post these RRP $1400

post-30339-0-83519300-1368953019_thumb.jpg

post-30339-0-18495400-1368953058_thumb.jpg

post-30339-0-42369900-1368953097_thumb.jpg

YELLOW JACKETS coil pack set R33 Series 2 (no ignitor box) - YJ-RB2526-S2

Straight bolt in for RB25

NEW never used - they have been fitted but never fired up. pic is not of actual coilpacks as I didn't get a photo of the actual ones

$350 + post

Turbo Beanie

Keep the heat where it should be - suit T25-T3 small T4

NEW never used

$60 plus post

Nissan Skyline R32 Reat strut brace bar GTST GTR - Looks like a whiteline?

Used in good condition

$100 + post

Nissan Skyline R32 Front strut brace bar GTST GTR - Also Looks like a whiteline?

Used in good condition

$100 + post

post-30339-0-83848700-1368953309_thumb.jpg

Front mount intercooler 600x300x76

Perfect for the front of any skyline

Finished in black in great condition looks like new, has been used.

$100 + post

post-30339-0-56584400-1368953258_thumb.jpg

R32 GTST Gearbox and tailshaft combo

Has redline oil, taken out of vehicle with 145xxxkms on clock

$500 pickup only will throw in heavy duty clutch for extra

$100

ID1000 injectors 1000cc top feed injectors with injector plugs - and brand new Billet fuel rail combo

Complete setup $1100 good for Pump fuel or E85 capable of 350rwkw with supporting mods

NEW never used

$600 for injectors + post

$150 Fuel rail with -8AN 90degree fittings + post

Pro Flow inline fuel filter also available pics up soon.

post-30339-0-09802700-1368953329_thumb.jpg

post-30339-0-60350200-1368953340_thumb.jpg

post-30339-0-30955000-1368953348_thumb.jpg

post-30339-0-90025100-1368953356_thumb.jpg

Drift Steering wheel deep dish blank horn button

BRAND New in the plastic

$80 + post

Oil Cooler with Relocation Kit and all braided lines and -AN fittings kit everything you need to make it work - even filter

Brand new unused, bolted up for trial fitement, will fit straight into an R33 or R32.

$450 for the lot

RB25 cam covers with -12AN fittings on breathers.

Fittings are with $100 alone!

$150 for both covers and fitings

RB25 Coilpack cover

$50 + post

Innovate Afr Wideband Air/fuel Ratio Gauge

Comes with everything you get inthe Box, offers dark face or

silver face option

NEW never used.

$200 for everything

RB25 R33 Silicon radiator hoses

Top and bottom hose

NEW never used

$20 + post

Oil Filter sandwich plate + all braided lines and -AN fittings.

Got your own core? Use this to plumb it up.

Has been used but in good condition

$80 + post

RB25 R33 engine mounts

Used good condition

$80 pair + post

Exhaust heat wrap roll

NEW never used

$50 for the roll enough to do manifold and dump pipe.

R33 AC compressor

Used and no longer required purchased with a spare engine.

$50 + post

R33 power steer pump

Used and no longer required purchased with a spare engine.

$30 + post

I also have a range of R33 and R32 bits so PM me if you need anything. Will post more items soon.

Located in Sydney Hills Area prefer pickup will post at buyers expense, all prices negotiable although please no

time wasters - time is precious!

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/425521-r33-r32-performance-parts-and-wreck/
Share on other sites

But wait there's still more...

Surge Tank Setup with GENUINE BOSCH 044 700HP external pump complete mounting bracket ready to go.

BRAND NEW never used, fabricated from aluminium looks neat as - not ebay alloy. BYO hoses and your good to go with this one

$320 plus post ono

post-30339-0-71872600-1369739037_thumb.jpg

post-30339-0-64820000-1369739046_thumb.jpg

Cometic stainless steel gasket to suit RB25

New and never used

$50 posted

post-30339-0-60509000-1369739173_thumb.jpg

JJR steering wheel quick release

New and never used

$50 posted

post-30339-0-24796400-1369739237_thumb.jpg

Injector Loom to suit RB25

Great condition plugs are fresh as.

$40posted

post-30339-0-05561500-1369739313_thumb.jpg

GLOW SHIFT electronic Fuel PRESSURE gauge 52mm

New and never used comes with all senders and wiring

BLUE led - look awesome day and night

$75 posted

GLOW SHIFT electronic OIL TEMP gauge 52mm

New and never used comes with all senders and wiring

BLUE led

$65 posted

GLOW SHIFT electronic OIL PRESSURE gauge 52mm

New and never used comes with all senders and wiring

BLUE led

$65 posted

GLOW SHIFT electronic WATER TEMP gauge 52mm

New and never used comes with all senders and wiring

BLUE led

$65 posted

post-30339-0-53879400-1369740060_thumb.jpg

post-30339-0-68594700-1369740071_thumb.jpg

post-30339-0-86776300-1369740083_thumb.jpg

post-30339-0-37293300-1369740098_thumb.jpg

post-30339-0-41184100-1369740156_thumb.jpg

YELLOW JACKETS coil pack set R33 Series 2 (no ignitor box) - YJ-RB2526-S2

Straight bolt in for RB25

NEW never used - they have been fitted but never fired up.

$250

post-30339-0-40960700-1369740266_thumb.jpg

SILICON Radiator Hoses

Straight bolt in for RB25

NEW never used - $20 + post

post-30339-0-04036900-1369740409_thumb.jpg

Drift Steering wheel deep dish blank horn button

BRAND New in the plastic

$80

post-30339-0-82386900-1369740505_thumb.jpg

R33 clutch fan

Great Condition

$80 + post

post-30339-0-21641800-1369740665_thumb.jpg

R33 space saver spare wheel

Great Condition

$50 pickup only

post-30339-0-96254500-1369740674_thumb.jpg

RB25 forward facing plenum

Great Condition don't need as have a plazmaman

$300 plus post ono

post-30339-0-67059500-1369740818_thumb.jpg

post-30339-0-49036000-1369740829_thumb.jpg

R33 stock plenum and runners

Bare plenum no injectors of fuel rail, don't need as have a plazmaman

$50 plus post ono

post-30339-0-95173900-1369740902_thumb.jpg

post-30339-0-16013500-1369740937_thumb.jpg

R33 Series 2 stock coilpack loom/harness

Great condition

$50 posted

post-30339-0-48057300-1369740976_thumb.jpg

R33 radiator shroud

great condition no cracks or breaks, just needs a quick clean

$75 pickup

post-30339-0-11619400-1369741051_thumb.jpg

R33 Series 2 Door Trims

Front pair only in good condition

$60 pickup only

post-30339-0-32883200-1369741105_thumb.jpg

R33 stock plenum and runners

Blitz 52mm Boost Gauge

Great condition $55 posted

post-30339-0-34862200-1369742283_thumb.jpg

Bilet Fuel Rail with -6AN fittings as above

NEW Never used

$120 posted

post-30339-0-70467600-1369742392_thumb.jpg

R33 RB25 CAS crank angle sensor

Great working order removed from running vehicle.

$110 posted

post-30339-0-48804300-1369742507_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
    • Noted. Have noticed BMW are more 'high maintenance' for sure. They've attracted my attention as I think the used car prices seem reasonable vs other options, and the extra quality overall vs a commodore / camry / corolla or similar of the same vintage is appealing, especially the interior, and they are more on the sporty side whereas the others mentioned can be more cruising or economical A-to-B only.
×
×
  • Create New...