Jump to content
SAU Community

Recommended Posts

Can someone please confirm nm35 suspension (shocks) front and rear part numbers. I think in this it states 350z premium is compatable.

Fronts won't work for AWD because they have a different bottom as they don't have to avoid a driveshaft. If your car is RWD they may fit.

Rears should fit, but front deff wont.

The G35x is closest to our car for AWD purposes.

Edited by M35woah

I don't even think the rears will work; don't they run a true coilover, rather than separate coil/shock?

The reason M35's run them separately is to allow a flat cargo floor with no intrusive strut towers.

Sedans & coupes have no need to do this.

Yep, scratch my last comment; but the shocks on 350Z & V series look to be quite a bit longer.

Agreed Scotty, for the price of a set of KYB shocks; you're 2/3rds of the way to a set of BC's.

And they'll sell you a replacement damper for $100ish is you ever need one.

In cabin pollen/AC filter.

Nissan part number 272774M400

Ryco PN:RCA113P

http://tygarbyte.blogspot.com.au/2012/10/m35-stagea-air-con-filter_6431.html

Has anyone changed the A/C cabin filter ?

Also what filtet/part number did you use ?

Bugger... today my M35 developed a major slip in drive. Ok in reverse. Anyone else have this problem.?

Who has an auto for sale in syd ?? Might be a quick fix, till i can see whats wrong with this one. It's the family daily drive..

Edited by FIA510

^ Dude - wrong thread for that question. Start a new thread.

I used Ryco PN:RCA113P to replace my cabin filter. Old one (a bosch) was rank too.

There's also a Ryco with a C at the end of the p/n which designates it as an activated carbon/charcoal filter, this is the correct replacement for the factory one.

I'm wanting to bag my 2002 M35 and was wondering if a 370z airbag kit would fit? Reason being it's impossible to find a specific kit for a Stagea and I don't wanna go down the custom route because it's gonna be EXPENSIVE! I considered coilovers but it's gonna be stupidly impossible to drive on normal roads and over speed bumps with the height I want. Any help would be appreciated, cheers.

I'm wanting to bag my 2002 M35 and was wondering if a 370z airbag kit would fit? Reason being it's impossible to find a specific kit for a Stagea and I don't wanna go down the custom route because it's gonna be EXPENSIVE! I considered coilovers but it's gonna be stupidly impossible to drive on normal roads and over speed bumps with the height I want. Any help would be appreciated, cheers.

Doubt it.

There are bag kits available for the M35 Stagea in Japan though.

Best bet would be to look on Import Monster or contact Jesse Streeter

  • Like 1

but it's gonna be stupidly impossible to drive on normal roads

This is your problem, so why be stupid at all?

The crossmember is the lowest point, I wouldn't want to hit something solid with it...

Doubt it.

There are bag kits available for the M35 Stagea in Japan though.

Best bet would be to look on Import Monster or contact Jesse Streeter

Nothing local, but yeah IM or Streeter can sort this one out for you http://page4.auctions.yahoo.co.jp/jp/auction/d148045989

Depends on your definition of 'expensive' too though.

I contacted import monster before posting this and they advised me of a couple of airbag companies, sadly none of which had an M35 kit. I only want bags so I can drop the car while parked, 19x11's and 19x10's would look good with coil-overs but when I want to drive away I wanna have a comfortable ride without getting stopped by the police. The only kit I've seen for an M35 was $5,700 Aus and that's abit excessive just for suspension in my opinion.

Nothing local, but yeah IM or Streeter can sort this one out for you http://page4.auctions.yahoo.co.jp/jp/auction/d148045989

Depends on your definition of 'expensive' too though.

Wish I could read Japanese, it would help with a lot of things.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good points thanks. Unfortunately I can't seem to rename this or delete the topic. Seems like I'll ask the moderators to change it or delete it.
    • You might want to update the thread title.  V37 ≠ V36.  And it probably isn't a G37 unless it is 2012+ Ininiti or LHD.
    • Just a basic run down of the relevant bolt-ons. All e85 First graph 406.9whp is HKS GT-RS, HPI manifold, 3" bell mouth dump / 3" straight through fake cat / 3" all the way to the rear and no resonators, nismo 740cc, walbro 460, oem RB26 itb's, power fc, eboost2, Greddy Spec M fmic, poncams, Turbosmart actuator, splitfires, ARD 150amp alternator. Blue line is same as above but Blitz Dual SBC (before i upgraded to eboost2) and 100cell "high flow" cat. Red line is after installing eboost2 and the fake 3" cat (it's just a 3" pipe with a cat shell welded onto it). Huge gains in response, as can be seen. Black dots are a mates sr20 with almost identical setup but uses a garrett 2871 instead oh HKS. Next grapghn 466.6whp is same as above, but HKS 2835 Pro S with the larger .87ar turbine housing, the special HKS Pro S dump pipe into a HPI split dual 2.5" front pipe and the rest stayed as is. Red line is after I welded the actuator brackets. (It was originally bolted together and was moving a couple millimetres under load). Green line is obviously before I welded the bracket, no other changes. 100whp gain at 3750rpm, massive gain for such a simple fix. Third graph is my current setup, huge changes. 469.7whp R31house twin scroll manifold, twin TiAl 38mm gates, Forced Performance (USA) HTA3076 with 1.01ar twin scroll rear housing, Link Fury+ and loom by 12volt, PRP trigger kit and r35 coil kit with r35 splitfire coils, HKS step 1 vct staggered cams, new oem lifters and performance springs, 49mm itb's w/port matched Nismo plenum, twin walbro 460 surge tank setup + 1650cc injectors, HKS Type R S13 600x300x103mm fmic, individual egt's, 4" turbo back with no resonators or cat and AES true straight through muffler + 4" butterfly off the dump pipe lower 90° bend. It's a preliminary tune with no boost control with using 20psi gate springs and 4" butterfly closed. Once body loom and PDM is compete, will go for 30psi tune.
    • Power light apparently functions as a transmission error light, you can try the power sequence to read any codes from the transmission control unit.  
×
×
  • Create New...