Jump to content
SAU Community

Summary Of P1-110 Of The M35 Info Uber Thread

MrStabby
 Share

Recommended Posts

Commsman Veteran

Commsman

Posted
Posted
  On 23/04/2014 at 10:22 PM, scotty nm35 said:

Mine is still going I think, I lent it to Jase a year ago. 13 years is pretty reliable if you ask me.

If only Nissan still sold that original part, not the part they sell now which only lasts a few weeks. (if you are lucky.)

My aftermarket ones seem to be lasting fine Leon... :)

That's a good point Scotty, & you are totally correct. Just because a heap have failed in the last 12 months or so, doesn't make the AFM any less reliable then a cam sensor, window motor or electric seat switch. They're all going to be getting close to the end of their life after 13 years or so.

I've got 2 original AFM's & given how little distance my car gets driven, I reckon I'm set for another decade or 2 :)

  • Replies 198
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

MrStabby
MrStabby

I bought an NM35, read the Info thread, and made notes. Also added a few tidbits I found. UPDATE: Added more info from pages 1 to 9 of this thread Engine The V35 & M35 airboxes have

scotty nm35
scotty nm35

For ballpoints, you can't go past BIC.

scotty nm35
scotty nm35

To follow on from the Facebook argument from last night... M35 part required for when the time travel switch fails on the clock assembly. http://www.oreillyauto.com/site/c/detail/EB00/121G.oap?ck=Se

Posted Images

joshm35 Veteran

joshm35

Posted
Posted
  On 24/04/2014 at 7:25 AM, FIA510 said:

it happens every now & then in between gears. I'll be looking into the Kompact BOV asap.

Where does the factory boost guage connect up ? Mine is is always reading in the neg & occasionally goes to 0.

Is there a guage you can swap in it's orig place without going all ricer & mounting one.?

sensor of a black oval box in engine bay next to wheel arch. Pull it apart and resolder the points.
  • 1 month later...
scotty nm35 Grand Master

scotty nm35

Posted
Posted

To follow on from the Facebook argument from last night... M35 part required for when the time travel switch fails on the clock assembly.

http://www.oreillyauto.com/site/c/detail/EB00/121G.oap?ck=Search_121g_-1_-1&keyword=121g

  • Like 3
joshm35 Veteran

joshm35

Posted
Posted

Does anyone have the part number for the lower ballpoints from Nissan and a price? I recently sourced some v35 ones and installed them and now front end has constant cracking in the front end.

scotty nm35 Grand Master

scotty nm35

Posted
Posted
  On 10/06/2014 at 9:25 AM, joshm35 said:

Does anyone have the part number for the lower ballpoints from Nissan and a price? I recently sourced some v35 ones and installed them and now front end has constant cracking in the front end.

For ballpoints, you can't go past BIC. :P

  • Like 4
M35woah Rising Star

M35woah

Posted
Posted
  On 10/06/2014 at 9:25 AM, joshm35 said:

Does anyone have the part number for the lower ballpoints from Nissan and a price? I recently sourced some v35 ones and installed them and now front end has constant cracking in the front end.

Assume you mean ball joints yeah? the lowest ones on the steering knuckle?

Nissan doesn't sell it separately, they'll only sell you the whole assembly. Have to go on ebay.

ironpaw Veteran

ironpaw

Posted
Posted
  On 10/06/2014 at 9:25 AM, joshm35 said:

Does anyone have the part number for the lower ballpoints from Nissan and a price? I recently sourced some v35 ones and installed them and now front end has constant cracking in the front end.

Was it these ones you bought?

http://www.ebay.com.au/itm/2-FRONT-LOWER-BALL-JOINT-Set-NISSAN-SKYLINE-V35-01-07-/190450769457?pt=AU_Car_Parts_Accessories&hash=item2c57c01e31#ht_2375wt_1180

DAmmit I bought them too, seems like some other haven't had issues with them though...

  • 3 weeks later...
TCO Contributor

TCO

Posted
Posted

Microguard Pure-Tron Cabin Filter: B74946N025

This probably won't help many. I found that my Stagea didn't use the standard cabin filter instead in it's place is a Microguard Pure-Tron:

http://www.calsonickansei.co.jp/english/products/accessory.html

When i'd pulled the glove box etc.. out i was presented with this:

post-128502-0-89243200-1404046189_thumb.jpg

post-128502-0-21133400-1404046746_thumb.jpg

post-128502-0-32494700-1404046776_thumb.jpg

Amayama have the replacement filter for ~$65. Looking for alternatives.

TCO Contributor

TCO

Posted
Posted

Yeah it's an Ioniser, with a filter sitting in it. It's the first one I've seen like this, all the previous ones i've seen / dealt with have been the parcel shelf models in Skylines and 'rollas.

The standard filter doesn't fit, it's way too big (i purchased one prior to pulling the car apart). The ioniser takes a up about half the height and the filter sits within it's frame making it smaller in all directions.

Size comparison (Stock filter bottom):

post-128502-0-59981800-1404092550_thumb.jpg

nickcorr Proficient

nickcorr

Posted
Posted

I had the same as this on my ARX. Gave up trying to find a replacement that fitted, and when back to the XTrail/Maxima sized one...

In addition, the actual ioniser screen was discussting, covered in cigarette smoke like rubbish... Actually found it all in the garage over the weekend and tossed it..

  • 2 weeks later...
PN-Mad Grand Master

PN-Mad

Posted
Posted
  On 12/07/2014 at 10:11 AM, joshm35 said:

G'day all,

I'm chasing part numbers and possible price of valve stem seals for vq25det engine. Any help would be great.

1320784A00

scotty nm35 Grand Master

scotty nm35

Posted
Posted
  On 12/07/2014 at 10:11 AM, joshm35 said:

G'day all,

I'm chasing part numbers and possible price of valve stem seals for vq25det engine. Any help would be great.

It's an engine out job, are you sure it's the valve stem seals? Have you tried leak testing them or something?

scotty nm35 Grand Master

scotty nm35

Posted
Posted

It's just the PCV valve, it sucks crankcase vapours into your engine and overnight they condense and run down onto the valve. It burns off as you take off in the morning.

I wouldn't worry about it at all. I ended up fitting a catch can to my PCV line, but it has to be sealed as it's in vac. It worked well to stop it, but it's a pain to drain.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...