Summary Of P1-110 Of The M35 Info Uber Thread

[zelda]

About the same through partmaster, Nissan didn't have them available on the day and wanted some made up figure in their heads ( he quoted me $122 over the phone )

[joshm35]

Thats like when i had my aristo and went to toyota. 'Aristo? Is it an import. Sorry cant help you'

[joshm35]

Does anyone have the part number for the auto gearbox service kit.

[scotty nm35]

There is no need, just clean the stainless mesh filter with brake cleaner. Use high temp silicone to reseal the sump, and don't do the screws too tight. I have never had to replace the gasket once.

If you need parts, there are some on Ebay locally it seems. http://www.ebay.com/itm/Premium-Auto-Trans-Filter-Service-Kit-KFS964-Trans-RE5R05A-Speed-5-/251422734703

Not sure if they are the parts we need though... No pics.

[joshm35]

350z alternator is a direct replacement for the vq25det

[scotty nm35]

Even the VQ35 starter sort of fits, it's larger and probably more powerful than the little VQ25 unit. The power lead is on a different angle and gets close to the hot side cooler pipe, but mine doesn't seem to be an issue as yet, wouldn't be hard to insulate the wire better though, or just tape it down.

I am interested to see if the VQ35 AFM will work too, as long as the voltage/airflow curve is similar it would be a great upgrade for those of us blowing AFM's constantly. I have new plugs in stock for them, and if you are tuning the car it probably wouldn't matter, but if the curve is out the stock ecu may not like it. Just need to spin a stock Stagea up on the dyno after fitting one before I can recommend them.

[YangLIU]

  On 17/07/2015 at 5:18 AM, scotty nm35 said:

Even the VQ35 starter sort of fits, it's larger and probably more powerful than the little VQ25 unit. The power lead is on a different angle and gets close to the hot side cooler pipe, but mine doesn't seem to be an issue as yet, wouldn't be hard to insulate the wire better though, or just tape it down.

I am interested to see if the VQ35 AFM will work too, as long as the voltage/airflow curve is similar it would be a great upgrade for those of us blowing AFM's constantly. I have new plugs in stock for them, and if you are tuning the car it probably wouldn't matter, but if the curve is out the stock ecu may not like it. Just need to spin a stock Stagea up on the dyno after fitting one before I can recommend them.

will VQ35 AFM work with VQ25 stock ECU? I want to get stronger AFM with stock ECU, LOL

[joshm35]

Think you have a tester scott

[scotty nm35]

  On 17/07/2015 at 7:36 AM, YangLIU said:

will VQ35 AFM work with VQ25 stock ECU? I want to get stronger AFM with stock ECU, LOL

Not sure Yang, need to swap AFM's on the dyno and check out the afr's on boost. The low end will sort itself out using the o2 sensor.

Looking at the power the VQ35 afm's flow, they should be pretty close.

[Daleo]

Not sure if the pump strainer is in here; might be worth getting it added to the front page.

Strainer Assy; 16400-4M405

Hornsby Nissan price; $38.70

[BoostdR]

M35 Torque Convertor / front pump assembly auto trans seal.

Symptom, oil coming from between gearbox and transmission

[Philr32]

M35 front wheel bearing and hub: (they are the same as J32 maxima

[admS15]

  On 14/05/2016 at 12:00 AM, Philr32 said:

M35 front wheel bearing and hub: (they are the same as J32 maxima ImageUploadedBySAU Community1463183960.939535.jpg

Is that 4wd bearings and hubs?

[Brick]

  On 14/05/2016 at 1:09 AM, admS15 said:

Is that 4wd bearings and hubs?

I am pretty sure they aren't

[Daleo]

  On 14/05/2016 at 1:27 AM, Brick said:

I am pretty sure they aren't

Considering the J32 is FWD; I'd be willing to bet that it is.

[Philr32]

Yes they are for the AWD/4WD model (2.5T).

[MichaelS]

Any cheapish easy options for rear shocks only? No point doing coilovers when I am selling it. My research is telling me I pretty much have no options other than NSF2069 @ ~$200 each or finding some used. Is this about right?

[West]

Anyone know if M35 Aircon compressor is a direct replacement with 350z?

[White_Stag]

Hi guys does anyone have parts numbers for Rocker cover gaskets and seal for back of oil cooler. I'm having slight oil leaks.

 

Thank you!

[datmoo]

  On 20/10/2016 at 11:35 PM, White_Stag said:

Hi guys does anyone have parts numbers for Rocker cover gaskets and seal for back of oil cooler. I'm having slight oil leaks.

 

Thank you!

Expand  

http://jp-carparts.com/nissan/partlist.php?maker=nissan&type=153&cartype=7&fig=111&page=3