Willis's Garage Cleanout!

[Willis]

Willis's Garage Cleanout!

Location; Sydney NSW (Western Suburbs)

Ok so i have just sold my skyline. Trying to clear out some space. Send any offers through via PM.

Regards, please don't msg me asking if i have thing's that are not listed. Thanks.

Engine / Driveline;

RB20DET Engine (no turbo, no coilpacks, no power steering pump, no aircon compressor and no starter motor) comp test 130 PSI across cold, removed for RB25 conversion. - $500

RB20DET Gearbox (average condition, second gear synchro is pretty shot it's fine when rev matching though.. gearbox whine in 1st and 2nd gear's) removed for RB25 conversion, includes RB20 Clutch Slave - $300

RB20DET Driveshaft (good condition) removed for RB25 conversion - $150

RB20DET / 25 S1 Throttle Position Sensor - $40

RB20DET Radiator + Shroud - No leaks, no corrosion, removed for Aluminium Radiator Upgrade - $100

RB20 Clutch Master Cylinder - $60

RB20 Clutch Slave Cylinder - $20

Exterior;

Front bar as pictured (pretty average condition, would suit drift pig) - $40

LH + RH Doors (Gunmetal Grey), average condition, includes windows and everything else found in the door, includes door skins - $150

LH + RH Guards in average condition (Gunmetal Grey)- $150

R32 GTR N1 Headlights, Immaculate - $250 pair (no mount for grill, can be bought from nissan for cheap..)

Exhaust;

RB26 FRONT PIPES (twin 2.5" inlets to 3" rear) contact damage with ground - $50

3" Jasma approved cat-back suit R32, includes catalytic converter - $150

Suspension;

HCR32 OEM Camber Arms - $50

HCR32 OEM Castor Arms - $50

Driftworks HICAS Lockout Kit, BYO bolt's etc - $150

GK tech adjustable castor arms V2 suit s13/180/r32/a31, billet 7075-T6 aluminium construction BRAND NEW IN BOX - $120 (rrp 150)

Braided Brake Lines - $60

Driftworks Solid Subframe Risers (new in box) - $80

Interior;

Skyline Door Trims (kick panels), both in good condition - $20 pair

Sparco Pedals + OEM Pedal Box's, Clutch, Accelerator and Brake - $120

R32 GTR NISMO CLUSTER 260kph / 10k rpm ODO 78568 - $300

R32 Ash Tray - $30

Apexi Pen Turbo Timer - $50

Drift Button GK TECH - $10

Wheels;

Work VS-MX 17 x 8 +22 and 17 x 9 +22 pcd 5x114.3 & 4x114.3 17 x 8 +22. No buckles, wheels have rash as pictured. These are genuine 3 piece items, i bought them with the intention to rebuild with larger lips. The front's require spacers to clear 32 GTR brakes.

The 8's come wrapped in 205/40r17 as pictured. The rears are in similar condition, have more dish and no tyres. - $1200 ono

Kosei 17 x 8 +38 and 17 x 9 +38 wrapped in 235/45r17 & 255/40r17 Bridgestone Adrenaline's (tyres are down to wear markers, camber worn, wheels have rash, structurally sound) - $700

Rays Gram Lights 17 x 9.5 + 36 PAIR ONLY(tyres are dead) - $400

Random parts;

Trust Front Mount I/C NO PIPING - $150

R32 GTR Resistor Pack (to run 32 GTR Injectors on a RB20) homemade - $50

SCA Engine Crane as new! used once then stored in garage! - $250

K&N Intake Pod Filters suit RB26 - $50

S13 / 180SX SR20 Oil feed hardline, not leaking bought as a fix for my old leaking one - $30

Thanks!

Willis.

Edited May 21, 2013 by Willis

[Frosty]

are those N1 genuine? i cant see the mount for the grill

[eXquiSit]

i'll take the trust cooler

send me your number over pm

thanks

[gumby89]

empty your inbox buddy,
i'll take the front guards off your hands

[Willis]

are those N1 genuine? i cant see the mount for the grill

R32 GTR N1 Headlights, Immaculate - $250 pair (no mount for grill, can be bought from nissan for cheap..)

i'll take the trust cooler

send me your number over pm

thanks

PM Sent.

empty your inbox buddy,

i'll take the front guards off your hands

Inbox emptied.

Sounds good, PM Sent.

[snappy_]

Hey dude, I'm after a stock gear shift lever for a rb20, got one?

Cheers

Tom

[AVGR]

Interested in parting out the doors?

[Willis]

Hey dude, I'm after a stock gear shift lever for a rb20, got one?

Cheers

Tom

Hey buddy, i don't have one. As i stated in the thread;

please don't msg me asking if i have thing's that are not listed. Thanks.

Interested in parting out the doors?

It depends what you want and how many $ you will pay. Maybe just offer me on the doors?

Part them yourself?

Willis.

[AVGR]

In perth mate, shipping the door will cost more then the doors

[Willis]

In perth mate, shipping the door will cost more then the doors

Fair enough mate, what were you after? Window switch? Trim?

[Willis]

Trust Front Mount I/C NO PIPING - SOLD

[Willis]

Driftworks Solid Subframe Risers (new in box) - SOLD

[Willis]

Prices are negotiable, need to move these parts!

[shy_s6]

the risers arent bush replacements are they? just solid pineapples?

[Willis]

i don't know anything about any pineapples. they are sold anyways?

[Willis]

Braided Brake Lines - SOLD

[Willis]

GK tech adjustable castor arms V2 suit s13/180/r32/a31, billet 7075-T6 aluminium construction BRAND NEW IN BOX - SOLD

[Willis]

Can do a gearbox and engine package for $500! Want to move the larger items quickly.

Thanks!

Willis.

[Willis]

3" Jasma approved cat-back suit R32 - SOLD

Edited June 4, 2013 by Willis

[Willis]

Prices are negotiable, please make an offer!