Jump to content
SAU Community

Recommended Posts

Kosei 17 x 8 +38 and 17 x 9 +38 wrapped in 235/45r17 & 255/40r17 Bridgestone Adrenaline's (tyres are down to wear markers, camber worn, wheels have rash, structurally sound) - SOLD

RB20DET Engine (no turbo, no coilpacks, no power steering pump, no aircon compressor and no starter motor) comp test 130 PSI across cold, removed for RB25 conversion. - PRICE DROP $400

post-75263-0-52169500-1369092996_thumb.j post-75263-0-31176500-1369093204_thumb.j


RB20DET Gearbox (average condition, second gear synchro is pretty shot it's fine when rev matching though.. gearbox whine in 1st and 2nd gear's) removed for RB25 conversion, includes RB20 Clutch Slave - PRICE DROP $100

post-75263-0-93281600-1369092989_thumb.j


RB20DET Driveshaft (good condition) removed for RB25 conversion - PRICE DROP $50


RB20DET / 25 S1 Throttle Position Sensor - PRICE DROP $20

post-75263-0-13972700-1369092956_thumb.j


RB20DET Radiator + Shroud - No leaks, no corrosion, removed for Aluminium Radiator Upgrade - PRICE DROP $60

post-75263-0-18216900-1369092975_thumb.j


RB20 Clutch Master Cylinder - PRICE DROP $20

post-75263-0-51842400-1369093482_thumb.j


RB20 Clutch Slave Cylinder - PRICE DROP $10

post-75263-0-71138700-1369093492_thumb.j


Exterior;


Front bar as pictured (pretty average condition, would suit drift pig) - PRICE DROP $20

post-75263-0-12190000-1369092571_thumb.j


LH + RH Doors (Gunmetal Grey), average condition, includes windows and everything else found in the door, includes door skins - PRICE DROP $100 FOR BOTH!


LH + RH Guards in average condition (Gunmetal Grey)- SOLD PENDING PAYMENT AND PICKUP


R32 GTR N1 STYLE Headlights (can't confirm if genuine), Immaculate - PRICE DROP $200 pair

post-75263-0-47983800-1369092612_thumb.j post-75263-0-82795200-1369092620_thumb.j post-75263-0-81054900-1369092629_thumb.j post-75263-0-02744200-1369092638_thumb.j


Exhaust;


RB26 FRONT PIPES (twin 2.5" inlets to 3" rear) contact damage with ground - PRICE DROP - $FREE


Suspension;


HCR32 OEM Camber Arms - PRICE DROP $20

post-75263-0-01075800-1369092649_thumb.j


HCR32 OEM Castor Arms - PRICE DROP $50


Driftworks HICAS Lockout Kit, BYO bolt's etc - PRICE DROP $100


Interior;


Skyline Door Trims (kick panels), both in good condition - PRICE DROP $10 pair

post-75263-0-21042600-1369094888_thumb.j


Sparco Pedals + OEM Pedal Box's, Clutch, Accelerator and Brake - PRICE DROP $60

post-75263-0-65347900-1369093533_thumb.j


R32 GTR NISMO CLUSTER 260kph / 10k rpm ODO 78568 - PRICE DROP $250

post-75263-0-86717500-1369092658_thumb.j post-75263-0-42224100-1369092925_thumb.j


R32 Ash Tray - PRICE DROP $20

post-75263-0-96508000-1369092966_thumb.j


Apexi Pen Turbo Timer - PRICE DROP $40

post-75263-0-67168900-1369093505_thumb.j


Drift Button GK TECH - PRICE DROP $5

post-75263-0-94884600-1369093526_thumb.j


Wheels;


Work VS-MX 17 x 8 +22 and 17 x 9 +22 pcd 5x114.3 & 4x114.3 17 x 8 +22. No buckles, wheels have rash as pictured. These are genuine 3 piece items, i bought them with the intention to rebuild with larger lips. The front's require spacers to clear 32 GTR brakes.

The 8's come wrapped in 205/40r17 as pictured. The rears are in similar condition, have more dish and no tyres. - PRICE DROP $1000 ono

post-75263-0-37142700-1369093212_thumb.j post-75263-0-80237600-1369093219_thumb.j post-75263-0-96142600-1369093227_thumb.j post-75263-0-18505100-1369094889_thumb.j post-75263-0-22957500-1369094890_thumb.j


Rays Gram Lights 17 x 9.5 + 36 PAIR ONLY(tyres are dead) - PRICE DROP $350

post-75263-0-50818700-1369094882_thumb.j


Random parts;


R32 GTR Resistor Pack (to run 32 GTR Injectors on a RB20) homemade - PRICE DROP $30

post-75263-0-70804000-1369092984_thumb.j


SCA Engine Crane as new! used once then stored in garage! - PRICE DROP $200

post-75263-0-65940200-1369093195_thumb.j


K&N Intake Pod Filters suit RB26 - PRICE DROP $30


S13 / 180SX SR20 Oil feed hardline, not leaking bought as a fix for my old leaking one - PRICE DROP $20

post-75263-0-80467300-1369093003_thumb.j


Feel free to make any offers, want this stuff gone! Willis.

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...