Jump to content
SAU Community

Recommended Posts

Hi Guys

this is a EOI right now i will be putting a better ad at up once i get time for photos, i have a heap of R33 parts left over from my old R33 i parted out a year ago, im trying to move out of home need to get rid of some parts, all the prices are negotiable, if you pick up and buy more parts I'm happy to work out some sweet deals

R33 Gtst Brakes: Front and read calipers with new seals have been painted red and new TRW pads, disc's RDA slotted front and stock Rears both in VGC $650.00

R33 Gtst factory side skirts in KR4 Silver $150

R33 S2 passenger headlight VGC $200.00

R33 non-abs diff, will need to confirm the spec's i have been told this is a mechanical Diff $800 if its a mechanical $200 if its factory

R33 Gtst Jic Coil overs these are pillow ball coil overs which meas there is some noise the lower rubber bushes are cracking $400

R33 Gtst rear adjustable camber and traction arms in good condition $200

R33 Hicas lock out bar $50 for the bars and $50 for the hicas tie rod arms

Location: Canberra

Contact: PM or feel free to call on 0403 281 three three one

I'm happy to ship at your expense

Edited by Greekos
Link to comment
https://www.sau.com.au/forums/topic/425624-act-r33-parts-eoi/
Share on other sites

ONL1 hey i dont have a BMC, i dont want to sell the brakes separate but i'm happy to work a deal out if you buy the front and rear

Reese69 Hey i sure do they are 17's and fit 235 or 245 tires and fit r33 well, they are gold have some gutter rash and need tires give me a call so we can work out a price

here is what they looked like on my old shell http://www.skylinesaustralia.com/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=383907

i will try and post up pictures late tonight

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As GTS mentioned, it takes a bit of faffing, some fiddling and a little modifying.  With the strainers, you can buy different styles. Some sit flat on the pump, some angle down.  Here are some photos of mine, ignore the ugly welds lol. 
    • The smart thing is to actually locate the pump at the right point down the hanger, so that the strainer can stay sticking out at a right angle, but near the bottom. This is the perpetual hassle with retrofitting any different pump to the factory hanger. Some just go where you need it to, some need fiddling and faffing, and modifying of stuff.
    • Some updates. After a lot of praying and some inspecting of crank threads, we've found that they were both kinda munted but nothing seemed terminal. The other option was drilling and helicoiling the crank. That is obviously the last option so we decided to at least try to get a OEM GM bolt in to GM Specs. So after honing/linishing the balancer from it's .002" interference fit to a .0018" to .0015" to .0013" it eventually slotted on to the crank. ATI state the interference is nominally 0.0007-0.0009... so it's still snugger than ATI reckon and explains the issues we had to fit the thing to begin with. New GM bolt went in at 37 ft/lb then torqued 140 degrees after which was EXTREMELY   but it tightened up to 140 degrees and it was a lot of force. So all things considered, the balancer is secured to the exact specs that GM want with the OEM Stretch bolt, (that ATI say you can use..) and the balancer itself is seated and snug AF. So WOO. Engine is now back in the car with lots of swearing. Bellhousing bolts done up, driver side manifold is on, AC Compressor and hard lines are back on the car. Next step will be to connect various engine bits/wiring/intake/radiator etc. Then oil and coolant and ... test start it? And of course, looking into this issue... which actually doesn't look so bad - It looks like it can be twisted back into shape with a set of multigrips. Anyone wanna buy my bonnet? Boy it looks good over there and sunk cost sucks.
    • Also this may be a stupid question, but how would you recommend getting the strainer on a downwards angle ? as they tend to obviously clip to the bottom of the pump which usually sits level 馃ゴ
  • Create New...