Jump to content
SAU Community

Ford


Recommended Posts

we have all contributed (albeit in a very very small way) to holden and fords decline by buying foreign cars, if the build quality/technology was there then id def buy australian

Link to comment
Share on other sites

we have all contributed (albeit in a very very small way) to holden and fords decline by buying foreign cars, if the build quality/technology was there then id def buy australian

Shhhhhhhhhhhhhhhhhhh! You are on an imports forum :P hehe

Link to comment
Share on other sites

we have all contributed (albeit in a very very small way) to holden and fords decline by buying foreign cars, if the build quality/technology was there then id def buy australian

It is statements like that show why the industry is stuffed - simply because they are based on prejudice.

Where is the deficiency in technology? People line up to buy shtbox Hyundais by the boat load and they have no redeeming features of any kind, no quality, no technology, no nothing. Same for the best selling car in Australia - the Mazda 3. Where is the technology there? Or anything Chrysler ever built? Or Kia or the entire current Nissan range. And so on and so on. I mean to your way of thinking what magic technological bullet would have saved the Falcon?

As for build quality there is nothing wrong with the locals when you line them up against the imports anyway. Peoples mindsets appear to have been fixed in 1988. Show me a 1988 built anything and I will show you a piece of crap.

What killed Ford is the same thing that is killing the rest of the manufacturing industry in Australia. The exchange rate and prejudice.

  • Like 1
Link to comment
Share on other sites

I

It is statements like that show why the industry is stuffed - simply because they are based on prejudice.

Where is the deficiency in technology? People line up to buy shtbox Hyundais by the boat load and they have no redeeming features of any kind, no quality, no technology, no nothing. Same for the best selling car in Australia - the Mazda 3. Where is the technology there? Or anything Chrysler ever built? Or Kia or the entire current Nissan range. And so on and so on. I mean to your way of thinking what magic technological bullet would have saved the Falcon?

As for build quality there is nothing wrong with the locals when you line them up against the imports anyway. Peoples mindsets appear to have been fixed in 1988. Show me a 1988 built anything and I will show you a piece of crap.

What killed Ford is the same thing that is killing the rest of the manufacturing industry in Australia. The exchange rate and prejudice.

I manage a small fleet of passanger vehicles and have seen a huge shift away from large cars - i mean i have one falcon in a group of 60 (& one commie) or so vehicles around the state.

Put simply when they go out to auction after the lease term ends dont pull anywhere the same resale value as other alternative passanger vehicles. The only fleet used falcons i see down here are Police, Rental & taxis.

Link to comment
Share on other sites

I

I manage a small fleet of passanger vehicles and have seen a huge shift away from large cars - i mean i have one falcon in a group of 60 (& one commie) or so vehicles around the state.

Put simply when they go out to auction after the lease term ends dont pull anywhere the same resale value as other alternative passanger vehicles. The only fleet used falcons i see down here are Police, Rental & taxis.

It is more so a move to imports just because the exchange rate makes them cheaper. Not so long ago you could only get 50 US cents to the dollar or 65 Yen. Put even half that back into the equation and people would buy alot more local cars.

Where I am I see alot of Falcons/Commodores. But go to Perth (nearest capital) and you dont see any. But I also see a ridiculous number of Land Cruisers/Pradeo/Pajeros etc etc. Which kind of makes nonsense of the fuel economy argument so many people trot out. Dunno it might be that their size mitigates against ease of use in the city.

The shame of it is once the mining boom is gone and the dollar returns to historic levels there wont be anything left of manufacturing.

Link to comment
Share on other sites

I can see what you mean - better buying power, preconceptions, pensioners holding onto their hard earned & average resales are big contributing factors. Look at Mitsubishi and the 380 a few years ago, show must go on however!

Link to comment
Share on other sites

It is statements like that show why the industry is stuffed - simply because they are based on prejudice.

Where is the deficiency in technology? People line up to buy shtbox Hyundais by the boat load and they have no redeeming features of any kind, no quality, no technology, no nothing. Same for the best selling car in Australia - the Mazda 3. Where is the technology there? Or anything Chrysler ever built? Or Kia or the entire current Nissan range. And so on and so on. I mean to your way of thinking what magic technological bullet would have saved the Falcon?

As for build quality there is nothing wrong with the locals when you line them up against the imports anyway. Peoples mindsets appear to have been fixed in 1988. Show me a 1988 built anything and I will show you a piece of crap.

What killed Ford is the same thing that is killing the rest of the manufacturing industry in Australia. The exchange rate and prejudice.

im thinking that an import (for example like a lot of what we drive) built in 1990s is overall going to have a better resale value and be in better condition(and build quality) than most any falcon or commodore from the same era, this is why ive always had japanese cars. . . ive still got my 1977 datsun 120Y that ive had since 1984 and it still goes

Edited by StevenCJR31
Link to comment
Share on other sites

its a shame.

I like the look of the current falcons.

but, as stated, people are moving away from large SEDANS.

going into suvs, 4wds, and smaller cars.

think about it, used to see 20milkion camrys driving around, dont see that many aurions.

just as an example, my wife and I were looking at cars about a year ago.

I liked the falcon and conmodore performance range.

for a cheaper price, she wanted an suv(nissan murano).

in the end, she would be driving it, so, she gets what she wants.

dont have anywhere near enough to get both.

again, thats just 1 example.

Link to comment
Share on other sites

so the car industry is going the way of so many other industrys in this country. Its about time too, Other than empathy for those who will be unemployed I for one am pleased that millions upon millions of our dollars will no longer be thrown at unsustainable business's such as ford and holden.

Ford were always going to be the first to go based solely on a very poor marketing strategy coupled with an oppressive out of touch head office based in the us and a product lineup nobody wanted.

Fords earlier demise will probably see holden hang around a bit longer than it should but ultimately it too will follow the same path. We simply can not compete in the manufacturing sector due to an overbearing big brother and unionistic mentality requiring employers and employees to jump through so many time consuming and costly hoops it is unrealistic to think we can compete with imports manufactured in countrys where a more realistic approach is applied to a basically unskilled work force.

I havnt purchased a locally built product for more than 30 years simply because the value isnt there. Poor quality products at over inflated prices was always going to come undone at some stage.

Get rid of them all and cut the tarrifs and taxes on imports so we can afford decent quality cars at working mans prices.

Link to comment
Share on other sites

Sad day for the automotive industry in Australia.

But, Ford has been complaining that the Falcon is not selling. Is it any wonder - when was the last time you saw an ad for the Falcon? Ford are advertising Territorys, Fiestas, Focuses, every model other than the Falcon.

Link to comment
Share on other sites

Methinks tariffs might go up rather than down via pushing by the AMWU

Many members were also getting six figure sums pa. How much has that contributed to Ford's demise?

And another domino yet to fall???

Link to comment
Share on other sites

Just going back to Hyundai and the technology thing. They sell cars packed with features for a good price. We have Hyundai cars for work and after 40,000km there is no way I would buy one second hand. They are a terrible car inside, horrible to drive and need more maintenence than most other cars (except the Holden Cruise). People are looking for what they can have now and not what its going to be like in 2-3 year time.

The Skylines are like anything. They stopped making the RB skylines so like everything in Japan, get to a stage of rock bottom prices and eventually will rise again. Especially being such an influential car. HR31's are finally rising and the R33 gtst is about at rock bottom.

I tried to support Ford and my gf and I bought a car each. Love them so far. Hopefully doesnt end up being the 2-3 year lemon. I know some BA's had issues but hopefully those are sorted by the FG

Link to comment
Share on other sites

I feel for anyone who has recently purchased a new Falcon, that resale value has just hit rock bottom.

Perhaps they like a big car, got a good deal, prefer a local product........whatever reason they've just done a lot of dough.

But from some of the comments, it's clear history lessons are in order.

We can't produce anything in Aus ????

Forget local and import everything?????.......now there's a novel idea.

Link to comment
Share on other sites

You sir are an idiot.

Please share your knowledge with me on Hyundai's. I'd love to hear what you actually know about their so called "no quality" or in fact everything else insulting you said about them. And you're telling everyone else we're prejudice..

FYI the Toyota Corolla is Australia's #1 best selling car, moron.

It is statements like that show why the industry is stuffed - simply because they are based on prejudice.

Where is the deficiency in technology? People line up to buy shtbox Hyundais by the boat load and they have no redeeming features of any kind, no quality, no technology, no nothing. Same for the best selling car in Australia - the Mazda 3. Where is the technology there? Or anything Chrysler ever built?

Link to comment
Share on other sites

You sir are an idiot.

Please share your knowledge with me on Hyundai's. I'd love to hear what you actually know about their so called "no quality" or in fact everything else insulting you said about them. And you're telling everyone else we're prejudice..

FYI the Toyota Corolla is Australia's #1 best selling car, moron.

We have Hyundais for work cars. They are horrible to drive, noisy, uncomfortable. They are ugly, they have terrible handling and are falling apart. Hell the black trim inside them is now a vibrant shade of purple after sitting in the sun for a few years. They have not a single redeemable feature.

Top-selling vehicles in 2012: Brand Sales Movement % Mazda Mazda3 44,128 +6.5 Toyota HiLux 40,646 12.5 Toyota Corolla 38,799 +7.5 Holden Commodore 30,532 -24.8 Holden Cruze 29,161 -13.7 Hyundai i30 28,348 -1.8 Toyota Camry 27,230 +42.1 Nissan Navara 26,045 +20 Toyota Yaris 18,808 +16.0 Ford Focus 18,586 +44.5

I think the Nissan Moron sold far more cars but it isnt listed.

Link to comment
Share on other sites

Which cars do you drive?

Where are you pulling those figures from? the Corolla has been #1 for years.

You'd be wrong to assume the Corolla is the highest volume seller "for years"

2012

http://www.caradvice.com.au/206699/2012-new-car-sales-figures-total/

http://news.drive.com.au/drive/motor-news/in-detail-sales-winners-and-losers-of-2012-20130104-2c83p.html

2011

http://www.caradvice.com.au/153575/vehicle-sales-figures-2011-total/

2013 is looking a bit different with Corolla currently edging the 3 in sales.

Link to comment
Share on other sites

What the argument should really be here is Holden and Ford vs Used car market vs Consumer and bang for buck.
Allow me to elaborate...

Poor build quality: not really. Bar a few exceptions (BA/BF rear bushes) i dont think the quality over the whole car is as bad as people make it out to be.
Over priced: F#ck yes.

Lets take the example of the mid range cars 25-45kish. What you get in locally produced cars in terms of quality and options for that amount you can have from an imported car for less money, People love to save money. And some of the korean stuff coming through lately acually looks quite good.

Now, if the missus decides she wants an SUV, chances are youll be buying an imported one simply for the value for money. Or you will buy used.

Jump on carsales and see what you can get for that price bracket.07' ML 320 anyone? CLK500? 06' porsche cayenne, VW tiguan 09'.......There is an assortment of euro stuff for little money considering what you get..... and you dont lose 10k as soon as you drive it away from the dealership.

So over the last 5-8 years when people were paying out of their arses and/or over borrowing for houses because "if we buy this now and it doubles in price next year we are set" mentality or we need a 80' plasma because it exist, ze germans have been crafting some awsome automobiles, while our price of living skyrockets.
This has left alot of people with not alot of money and since the banks have tightened the belt on lending this has led to uncertainty amongst people and left people with less cash at 'hand'. So you look at bang for buck when purchasing...........

Now lets look at the high end car market.

Above average joe has wants to spend 80-100k on a car. Now, if you have 100k for a car im sure you can spare some coin extra if need be.

100k for a HSV clubsport R8 brand new........lol. Although the FPV gt-p/gt-e are better priced and i think they're a good car... It simply came too late, the COYOTE motor should have been built in place of that anchor they called the BOSS (Basically built fom what they had lying around/ pre-existing parts). The damage was done, Holden had Ford by the balls and Ford pureists were weeping.

If im going to spend 80-100k on a car i want the best car for my money. Id jump on carsales and see what options i have: R35 GTR? C63 anyone? how about saving a bit of cash and going for a w211 e55 AMG? Porsche........

Best of all i wont lose 15k the moment it rolls off the showroom and id be getting more car for my dollar. You see, the good stuff thats been getting built overseas is now trickling into our market at good prices and as weary consumers we want the best for our money. Some of our workers making a killing in manufacturing here have driven up the prices of our local cars, but because i bought a house that im going to "double my money on" and got the "mad plasma" and am getting ripped putting my kids through child care, ill stick with my cheaper options.

Just my opinion

Edit- Our dollar isnt helping but thats another issue..

Edited by HGC-110
Link to comment
Share on other sites

A new Clubsport R8 isn't $100k. They're closer to $60k.

The new GTS is said to be around that mark, but that is fairly consistent with GTS pricing over the years (the VT II GTS was $95k more than 10 years ago).

100k for a HSV clubsport R8 brand new........lol.

Edited by BuuBox
  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Latest Posts

    • Gosh these bmw's are worse money pits than JDM's! I won't complain about my car anymore 😂
    • I'll just leave this quick tip here after reading your joys of getting the car in the air. It should take no more then 10 minutes to get the car safely up on stands.  So for the front, jack on the tow recovery points (marked in red). Put the jack stands under the lower control arm mounting point (marked in yellow). This photo is of a R34 GTR, however the process is the same. For the rear, jack under the diff (marked in red). Put the jack stands under the rear subframe or where the lower control arm mounting point (marked in yellow). Which point you use will depend on your stand, pick a nice stable point.  You've probably already read this but it's worth repeating. When jacking up the car or using stands, stay away from the chassis rails/pinch welds. Even the factory jack point, stay away from that too unless using a factory jack. I used those jack points for years without issue until I turned into an old man and bought a QuickJack lol. 
    • And this is where the leak is happening: https://www.dropbox.com/scl/fi/7h1vlmg2j5aa7rksvsjc9/IMG_9982.jpeg?rlkey=d3bnpau5f615zmxqmca0llvr7&st=kquvdxvs&dl=0   Apologies but it seems adding an image from a link does not work when the images are in Dropbox. 
    • Here are some pics from the auction: https://www.dropbox.com/scl/fi/gkbfaa7urogzhyzxtdgq4/4cd77e2d-e19f-45fb-80a0-f9a88fd7f51f.jpeg?rlkey=39p7xyvgr33kj0avcjry2v4ap&st=ncxmagj4&dl=0   https://www.dropbox.com/scl/fi/gkbfaa7urogzhyzxtdgq4/4cd77e2d-e19f-45fb-80a0-f9a88fd7f51f.jpeg?rlkey=39p7xyvgr33kj0avcjry2v4ap&st=ncxmagj4&dl=0
    • Hi all, From the western suburbs here. Just got my 2000 R34 GTT registered today! Got it imported from Japan through a mate who is doing them and managed to find a decent one. This one has only done 110,000 Km and had no body rust etc. so was very happy. I used to own a 25Gt back in 2015 (ate Ramen noodles for years to save up for it), but unfortunately, it got stolen TEN DAYS after I bought it!! Came back from Uni and the car was missing - cops found it in Springvale a month later with a lot of needles  😒 It was too late by then and I had moved on to a different car (300ZX), and after that one got broken into around 2018, I was in a very bad place and decided I would never buy a car again because it was just pointless!!! ~yeah, I have some very bad mojo~ 🥺 But now, with a stable job and a secure garage, I thought I'd get the R34 4D again but not as a daily! I love the R34s but a GTR is still a bit off my pay grade so settled for the GTT instead.    The first step for me is to get this car serviced and have all fluids, belts and spark plugs changed. I might do the brakes at one point too but atm they are fine, the fluids are what I want changed since this car probably sat in a garage for a long time. I'll then get some coilovers since the suspension needs to be changed anyway (the dust cover kit is disintegrating). I'll also upgrade my car alarm to a Viper system and then look at rims and tyres (I'm a sucker for TE37s - might have enough saved in another 3 years for that).   Today: I was planning to do the oil, coolant, air filter and fuel filter change this week. Started on the oil change today and MY GOD what a pain!! I used to think the 300ZX engine bay was cramped - oh I was so wrong! 😂 I've done the usual services on my cars before so it was not like I was going in blind. I looked up all the forum details about what oils to use, what coolant to use, what points to use to jack the car or place stands etc but I did not expect it to be this hard. Long story short - all I managed to do was the oil and filter change. I think I might end up taking it to a mechanic for a coolant change because my SCA stands and trolley jack just can't get far enough underneath to the cross-member and I don't want to be crushed under my favourite car....yet. Side note: In Dandenong, there used to be a shop that lets you hire their hoists - does anyone know if they have those around? I can't seem to find the Dandenong place anymore. I contacted them off FB almost 6 years ago and I'm not in it now. If anyone know of one, that would save me some time going to a mechanic for the basic services. Oil: Dark and gooey but no metal pieces. Oil Filter: Was a b***h to take off but no red flags Air filter: Yucky! Was black (Smells like fuel which makes me think it may have been running rich? - am I way off?)   Concerns: I have but one concern atm and that is that there was a very small amount of oil leaking where the engine and the transmission connect (Automatic). It may be the rear seal? It's not a massive leak and it does not affect the oil pressures or leak oil all along the driveway. It's been falling into the cover this whole time. I've taken the cover off so I can check the garage floor from time to time.  I also have not seen my engine temperature gauge ever sit at cold and slowly move up to the right spot, but that might be because every time I saw the car today, it was running. I'll check that again tomorrow. ATM it just sits right in the middle. I may just be paranoid but I don't want an overheating engine while my gauges say everything is fine. 🙈 Other than that, I'm very happy with the car! Feels like it's about time I went back to spending my weekends driving or cutting my arm on stupid sh*t in the engine bay.   PS: I will post a pic later on because I underestimated soooo badly today and it was dark by the time I finished! PPS: I broke the two damn plastic pins that hold the intake funnel section to the front bar. This is the piece made to bring cold air to the airbox. The connection to the airbox is fone, but the two clips just broke off! Should I be worried? Anyone else done that? 
×
×
  • Create New...