R32 Front Seats

[Footnah]

Hey, just wondering if there's a DIY guide (I tried to search, but had no success) for removing the standard r32 seat from the r32 rail? But my mate also reckons my seats MIGHT be r33 seats... I personally don't know enough about skylines to know the difference between seats, but does the mounting method change?

If so, I need to know how to remove r33 seats from r33 rails?

Orr...... has anyone got a good detailed picture of a bare rail? I'm trying to work out a way to adapt a side mount bracket for a bucket seat to the standard rail so my seat rail will be ADR approved.

Cheers,

Cameron.

[Sinista32]

32 fits 33 but not 34GTT

[luke gtr]

32/33 seats I believe to be the same with different material.

I believe you would still have to get it engineered?

arnt there adr approved rails available for side mount?

sparco or similar?

[Footnah]

32/33 seats I believe to be the same with different material.

I believe you would still have to get it engineered?

arnt there adr approved rails available for side mount?

sparco or similar?

To my understanding, if I'm not modfiying the rails in any way (Which I'm currently trying to find out if it's possible) and running ADR approved side mounts (velo side rails are) then I don't need to get it engineered. I need to find out how the actual seat is connected to the rail and if it's possible to put my side mount brackets on using those mounting positions.

I haven't found any ADR approved side mounts, but i'll VERY happily be proven wrong.

[dasic1]

The rails do not unbolt from these seats. If you want to do it you will need to grind/drill out the welds

[Footnah]

The rails do not unbolt from these seats. If you want to do it you will need to grind/drill out the welds

Ahh gay. Cheers man.