Jump to content
SAU Community

Recommended Posts


hey guys, doing some major upgrades to my mates r34 gtr so selling off all thats left and a few of my parts i have collected over the years.. ive taken pictures of most of the items but if you want pictures of the other stuff just ask me.



GTR Trust Drag intercooler 600x300x150mm, VGC, part of the end tanks chopped off for the different orientation i was planning while running it upside down - $1900


Full Set r34 gtr standard brakes with slotted front and rear rotors, rotors have been painted a bit to keep most the rust off, pads are a bit old and could do with a new set - $1600


AME TM-02 wheels, 18x10 +15 x4 on 1200km old achillies 123s semi slicks 265x35x18 - all very good condition no gutter rash, pretty much new still only one or two marks, can fit 380mm rotors behind them as per pictures, backs sit in a bit on the guards because of the camber - $2150


Genuine Te37's, 19x10.5 +12 x4 on brand new maybe 2km old (still have the tyre dicks on them) federal evo 595 275x30x19 - $4250


Surge tank setup, its to suit an r34 and mounts in the boot on the passenger side corner, has all lines needed for the install including the two not pictured that run to the fuel rail and from the regulator back to the surge tank, it can be modified very easily to suit any other model ie skyline or silvia.. consists of two bosch 044's and two magnafuel regs all speedflow fittings and lines - $1050


Peterson 4 stage dry sump pump, one damaged jic fitting as per picture and machined shaft for a hex drive (not sure why old owner did this must be an american thing) - $350


R34 gtr Power fc - tuned for a t04z on 6boost manifold, z32 airlfow meters, standard intake manifold and 800cc sard injectors made 330ish awkw, pretty sure there is a hand controller in there somewhere as well - $600


6boost 2jz manifold, twinscroll t4 flange.. can fit a gt45 frame turbo under the bonnet.. brand new - $1000


r34 gtr standard intercooler, very good condition - $350


tomei type rj fuel reg, very good condition - $150


2 x Z32 airflow meters and apexi pod filters, very good condition - $450


Nitto rb26 clear timing cover - $75


R33 gtst brake calipers, as new pads.. great condition - $350


rochester 14mm 1200cc injectors x 4, never been used only fitted - $400


R33 gtr passenger seat - $200


buddy club fixed back seat, has rail to suit s13/4/5. black with grey inserts for a normal sized person, has a small tear in the fabric other than that its as new - $450


sr20vet mazworx lhd or RHD without brake booster intake manifold, no fuel rail as new condition just needs a throttle cable bracket welded on - $500



will also be selling the following shortly


r34 gtr front bar, very good condition silver


r34 gtr front lip, very good condition silver


r34 gtr standard side skirts and nismo style carbon addons


r34 gtr front driveshaft - going with os88 box so no longer need it




all parts are located in mackay, north qld.. postage can be arranged for any of it.


thats it for now..


please contact me (spencer) on 0413347774 or via pm



DSC_0021-1_zps7404800d.jpg


DSC_0008_zpsb800bb9b.jpg


DSC_0009_zpsd6c19f2b.jpg


DSC_0017-1_zps21bab27c.jpg


DSC_0025_zps71d1da52.jpg


DSC_0027_zpsd160f973.jpg


DSC_0028_zpsdf1570e0.jpg


DSC_0029_zpsd481d0be.jpg


DSC_0030_zps4e94e74e.jpg


DSC_0041_zps58a10afe.jpg


DSC_0043_zps71821aea.jpg


DSC_0045_zps0b408fc9.jpg


DSC_0049-1_zps548ba5a0.jpg


DSC_0053_zps16e494b9.jpg


DSC_0054_zps076b6fcf.jpg


DSC_0055_zps0faac5c4.jpg


DSC_0056_zps5386c9a8.jpg


DSC_0058-1_zps7dba3d1b.jpg


DSC_0059_zps878786fa.jpg


DSC_0060_zps8bd716a5.jpg


DSC_0061_zps26e436a6.jpg


DSC_0062_zps78fe623f.jpg


DSC_0065_zps711f3a2b.jpg


DSC_0068_zpsf2aa3488.jpg


DSC_0069_zps4d6c208a.jpg


DSC_0070_zps91056045.jpg


  • Like 1

no sorry they would not.. you would need 200 series hose with the teflon inner lining and all new fittings to suite that type of hose.

R34 front bar sold

Intercooler arrived today, well packaged. Cheers mate.

Would buy from again without hesitation.

Thanks buddy :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • IMG_8641.mov     She doesn’t sound the best but starts with out using any gas now. I just ran some injector cleaner through her. started roughly the first time after adding it but gave it the beans slowly upto 4k, Must have cleaned a few cobwebs out. another step in the right direction for the sub
    • Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • Let's just fix the problem by f**king the rest of the gearbox.
    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
×
×
  • Create New...