Jump to content
SAU Community

What's Worth Checking At The Dealer Pre-Purchase?

Troy Hunt

By Troy Hunt,
in R35 GTR

 Share

Recommended Posts

Troy Hunt Newbie

Troy Hunt

Posted
Posted

Hi guys, just about to buy an R35 and have a few MY11s short-listed, a couple of them at Nissan dealers. Is there anything worth checking at the dealer before jumping in, particularly with regards to what they can pull from the ECU? I asked one about checking launches this week and had this response:

i asked the gtr guys about the launch control download they said its very hard to know how many launches because it dosent record them on the 2011 if you put the car into race mode thats all it will tell us and thats just data ,they said the most important is oil tems but they check those when we put the cars through the workshop anyway

All the cars I'm looking at are relatively low ks (~10,000km) and a year to run on warranty so there's always that, just interested in other thoughts on what can be checked pre-purchase. Thanks.

Wardski Rising Star

Wardski

Posted
Posted (edited)

Few things

1. Tyre condition - check the inside wearing as depending on camber setup (street or track) the tyres may be almost gone - especially if there has been track use...

2. Trans replacements - check the back of the service manual for any new trans serial nos

3. Servicing - Make sure all the services have been done. GTR's typically do well below the kms in the log book but the services are also date dependent. I remember when I was looking at 2010 GTRs 15 months ago, most of the personal sales had ~6000-10000kms, but never followed the servicing manual and warranties were void.

4. Check the stitching on the front seats, especially around the air bags - this is a weak point depending on the size of the previous driver.

5. If its a private sale, I'd have a Nissan GTR tech check it out prior to sale - the backyard boys doing RWC's for these cars have no idea.

6. Check the paint. Anything that looks out of the ordinary (bubbles, different shades, different colours at angles compared to adjacent panels, etc) as the GTR could have been crashed or in an incident.

7. Ask the owner if a Cobb has been used or any aftermarket mods... A Cobb AP with aftermarket tunes or LC upgrades will void any warranty left on the car - that is if you car about wty - Some private sellers will swear the car is stock and never modded, but that's where Nissan can help - they will tell you if it has been flashed previously.

8. Ask if any aftermarket oils have been used. Some GTR owners use their own gear, or stock replacements like Willall, etc. This can potentially void warranties (hit n miss) in the case where transmission failure occurs, and aftermarket oil is found.

If I can think of anything else - I'll let you know.

Hi guys, just about to buy an R35 and have a few MY11s short-listed, a couple of them at Nissan dealers. Is there anything worth checking at the dealer before jumping in, particularly with regards to what they can pull from the ECU? I asked one about checking launches this week and had this response:

All the cars I'm looking at are relatively low ks (~10,000km) and a year to run on warranty so there's always that, just interested in other thoughts on what can be checked pre-purchase. Thanks.

Edited by Wardski
  • Like 1
GTR-N1 Grand Master

GTR-N1

Posted
Posted

Few things

1. Tyre condition - check the inside wearing as depending on camber setup (street or track) the tyres may be almost gone - especially if there has been track use...

2. Trans replacements - check the back of the service manual for any new trans serial nos

3. Servicing - Make sure all the services have been done. GTR's typically do well below the kms in the log book but the services are also date dependent. I remember when I was looking at 2010 GTRs 15 months ago, most of the personal sales had ~6000-10000kms, but never followed the servicing manual and warranties were void.

4. Check the stitching on the front seats, especially around the air bags - this is a weak point depending on the size of the previous driver.

5. If its a private sale, I'd have a Nissan GTR tech check it out prior to sale - the backyard boys doing RWC's for these cars have no idea.

6. Check the paint. Anything that looks out of the ordinary (bubbles, different shades, different colours at angles compared to adjacent panels, etc) as the GTR could have been crashed or in an incident.

7. Ask the owner if a Cobb has been used or any aftermarket mods... A Cobb AP with aftermarket tunes or LC upgrades will void any warranty left on the car - that is if you car about wty - Some private sellers will swear the car is stock and never modded, but that's where Nissan can help - they will tell you if it has been flashed previously.

8. Ask if any aftermarket oils have been used. Some GTR owners use their own gear, or stock replacements like Willall, etc. This can potentially void warranties (hit n miss) in the case where transmission failure occurs, and aftermarket oil is found.

If I can think of anything else - I'll let you know.

Very kind of you to supply precise details > Very wise of you Troy to follow up.

Congratulations :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Thanks Santa (the neverending trials of the 400,000klm, 400kw, RB30, manual swapped Stagea)

      By soviet_merlin · Posted

      Thanks Duncan! Yeah it's street use for me only. Maybe occasional track day. Any difference in noise when running with the two pumps? I would expect the lift pump to be more quiet than the main pump so hopefully not? And yes, unfortunately quite a big price difference to the simple hanger setup. Though I'm usually willing to trade money for better reliability and future-proofing. Buy once, cry once and all that. I'd be very happy to never have to deal with fuel pump / wiring issues again  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Bonnet clearance?
    • joshuaho96
      Magnetic Drain Plug Snapped in Half

      By joshuaho96 · Posted

      On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
×
×
  • Create New...