Jump to content
SAU Community

Recommended Posts

I noticed my roof has a small chip awhile ago, didn't pay too much attention to it and only recently I realised it started to rust.... It's probably around 3-5mm wide.

I really don't wanna be respraying the roof... Is there anything I can do to stop the rust from spreading without respraying it?

Thanks!

post-40415-0-48445900-1369487913_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/425862-tiny-spot-of-rust-on-my-roof/
Share on other sites

I noticed my roof has a small chip awhile ago, didn't pay too much attention to it and only recently I realised it started to rust.... It's probably around 3-5mm wide.

I really don't wanna be respraying the roof... Is there anything I can do to stop the rust from spreading without respraying it?

Thanks!

attachicon.gif20130525_141843.jpg

Hey Charles, whatever you do DON'T leave it like that for too long! I left the one on my bootlid and now all the clear has peeled and it looks like shit! :(

Is it true that if you use rust neutraliser or converter, the spot will turn brown?....

Is it something that I can get away with just touch up paint?.... Or is it gonna look hidious after converting it?


Also, some rust is actually under a little bit of the paint...

Can someone give me a rough walkthrough of how or what to do pleaseeeee haha

Yeah it turns brown or black. Try to touch it up you won't do any more damage. Just build it up over a week or so. Tape up the area and give it a sand with some 1000 and then 2000 grit. Then cut polish and waxed it. See how you go. Worst case you stuff it totally and get fixed by a panel beater. Won't cost you anymore. Not a hard job just takes time and patients. See if you can get some etch primer for the first coat. Cheers

Edited by XGTRX

Yeah it turns brown or black. Try to touch it up you won't do any more damage. Just build it up over a week or so. Tape up the area and give it a sand with some 1000 and then 2000 grit. Then cut polish and waxed it. See how you go. Worst case you stuff it totally and get fixed by a panel beater. Won't cost you anymore. Not a hard job just takes time and patients. See if you can get some etch primer for the first coat. Cheers

yeah but you will need a spray gun for etch primer and you only use etch primer when the whole panel is stripped back to bare metal.its not for small repairs. you only need normal 2k primer.

Hmm... Honestly, I don't really care about how it will turn out lol, because my car has so many minor faults on all the panels of the car, it's due for a respray anyway.. But not now.

Guess I'll just sand back a little bit of the paint so I can remove all the rust or kill it, prime it, and spray it, then clear it, while all taped up.

Another thing I noticed with my car is, on the bonnet.. It seems like stone chips are causing my clear to bubble and eventually peel... So my question, why does stone chip causes my clear to bubble?

Gonna quick fix that with a bit of sanding and reclearing over the weekend..

Lol yeah my whole car needs a respray but it has white stickers holding the paint on! Nobody really notices but they have been there for about 3 years :laugh:

Haha yeah, I'm just waiting for someone to cover the cost of my respray lol :P

I figure as long as mine will be seeing track days, texi, hill climbs and daily use it just has to look good from a distance :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...