Jump to content
SAU Community

Recommended Posts

I just sold my Skyline one month ago and the owner has been away working and when he tried starting it the car it started than died. It wouldn't start at all after woulds and he flattened the battery twice trying to get it going. He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores? Car ran fine and never blew smoke apart from being too rich at start up and idle it had no other issues

Link to comment
https://www.sau.com.au/forums/topic/426316-car-sat-for-a-month-wont-start/
Share on other sites

He got the vehicle towed to a mechanics and they have told him the car has no compression??? WTF could this be caused from washing the bores?

Bore wash increases wear to the bore so yes a loss of compression can happen

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

Sounds like the "Mechanic" doesn't know shit from sugar or he's trying one on.

Buyer drives it home, parks it, doesn't do anything else, a month later tries to start it to no avail.

- Replace Plugs ($25) n Battery ($150) with new. Try start it.

If indeed the compression is low (no compression - pfffft) it was farked before sold.

IMHO anyway.

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

Is this an RB20 or 25 at all? Sounds like the hydraulic lifters may have bled down due to sitting for too long. Just keep cranking, for no more than about 20secs at a time without letting the starter cool.

This is a easy

While he was away couple of hes pissed mates thought it was a great idea to take the skyline for a rap to Maccas to get a $2 cheeseburger or two

Nek Minit

Pushing it back where they got it from

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

  • Like 1

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

Well said.

Simply put Yes I am. I believe the money is not wasted spent on these items. Not by the seller but by the buyer.

Cheaper option - clean existing plugs, swap in a battery from a mate and crank away....

-> Skyline works fine, not driven for a month, no compression - Some one is lying !!

If I didn't drive my GTR for a month. And then killed the battery twice trying to start it then I would do exactly what I advised.

My plugs will be fouled and my battery is likely also cactus. My compression would be 165-170 not 0psi

The mechanic doesn't know shit? but yet yet your giving him advice to spend 175$ on parts which may only turn out to be a further kick in the guts

  • Like 1

Maybe check the compression yourself to make sure, I can remember a similar thing with an r31 my bro owned, it ended up being a cracked cylinder head....

Edited by AngryRBGTX

Are you certain the guy was actually away working? Maybe he is lying and just raped the car for a month and then it died. Either way, it's got nothing to do with you. As long as it was running when he drove away then anything that happens after that is his problem.

so much this.

no compression?

so, not 1 cylinder has an ounce of pressure?

I find it very hard to believe.

maybe no fuel pressure?

in which case, fuel pump.

and it wouldn't start.

do the usual.

test fuel, test spark, actual comp test(with vid results), and go from there

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
×
×
  • Create New...