Jump to content
SAU Community

Recommended Posts

  • 5 months later...
  • 2 weeks later...

did the hill climb. was a blast. total handful....

up in the air of what to do.

theres no low to mid range then huge top end for a second and change gear.

do i change the rear housing from a .82 to a .63 rear housing?

or wait till i put a 25/30 in it and hopefully that fixes it?

Before spending money unplug vct solenoid and see if it makes things worse. If it stays the same get vct workimg

yer im going to have to.. just irritates me i have to do that after sending it to 2 different workshops, when i suck at mechanics!

http://s1196.photobucket.com/user/adz2332/media/Mobile%20Uploads/received_10208902650220669_zpsigtbb7kk.mp4.html

video of the hill climb...

doesnt do how steep and tight the turns were justice! plus its barely a car width wide!

  • 4 months later...

Bit of an update.

Decided to paint the car. currently in a million bits. Have an rb30 also half pulled down.

Asked around, what is the biggest stupidest wing for a 33? BCL was the answer..... as you can tell my dad in the back ground was as impressed with it.... good for a laugh! 

13557911_10157144131195215_3409995096213

13626637_10157144130440215_8579717224417

 

Prepping

13627160_10157140331440215_8641202146681

My brothers r31 but its the colour im also doing my r33. hard to get a good pic of it in the shade

14203217_10157431310855215_2974133742019

14212109_10157431310665215_7376160523224

 

Soo as for the interior, i let my much younger brother loose to decide the colour.... he came back with the phantom purple from the falcon BF era i think..... I didnt care so i said go for it. sprayed it on the under side of his boot.... and the result was

14212661_10157431104530215_3209309104960

I didnt mind it to much.... but he said its not finished and i had to go away until it was done.... i then come back to this 

14191893_10157431104635215_2434744404366

14212176_10157431104750215_2695265642969

Im unsure how i feel about this... but hes adamant that its what my interior is going to be.... not only that its all been bought! lol Leason to you all dont let your younger siblings pick colours! 

  • 3 weeks later...
57 minutes ago, Dose Pipe Sutututu said:

Don't go 0.63 rear, yuck.

 

I was defiantly considering it after seeing a s14 with almost my exact same mods on a rb25 make 280kws, and boy was its acceleration excellent and response was awesome.

But im building a rb30 / 25 so hopefully that will put the response issues to bed 

 

14519923_10157584623275215_7006899475110

14606348_10157584623385215_3686929384467

  • Like 1

Thanks mate. im happy with it being my first time doing it. theres a couple things ill touch up and fix after next weekends oznat thingo.

And if anyone is in adelaide and is going to the oznats, ill be there in this and my torana. plus my bro in his 31 (same colour) feel free to say hi! 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The fuel pump bracket just slides straight up.  Below is a pic I stole off a site. But basically put hand in for fuel pump, wiggle it all about a bit while pulling up. 
    • Went digging Duncan, there's another "item" that sits down under the plenum that the second pipe from the IACV goes down to. I believe that's the one that is apart of the cold start portion, and it then comes back up under the middle of the factory top plenum. I believe you will find it is unneeded on the forward facing plenum on Cheryl.   I just went digging further for some pics on the location of the one way check valve, and found something that confirms my thoughts from the first half of this point. I feel you can just block off that port that is coming down.     I can also confirm, the other line that you were thinking for vacuum that will just need a one way valve put into Cheryl is 100% correct too. The one way valve is normally screwed into the back of the factory inlet plenum.
    • You’re an absolute legend man. Cheers.  
    • The rule of thumb for any GTR thats doing a single turbo conversion is..... seqy... and when i say seqy, i dont mean the pos PPG either. *flamesuit on*
    • The ECU does care - it runs the engine as two banks of 3 wrt O2 trimming. So you have to give it the right one. Um....look at the engine bay pictures in the GTR manual? I think you can make them out there. I think the physical wiring diagram might also help.... Actually, I just looked at the engine bay wiring diag. It clear shows the shapes of the connectors. I'd say that R means rear. According to the rest of that diagram, pin 2 of the R one turns up at terminal 55 of the ECU. Which is.....the rear one.
×
×
  • Create New...