Jump to content
SAU Community

Recommended Posts

So Ive turned my attention to my weak tailgate struts which are now struggling in the cold of winter.

From what I can research, there are no easy replacements. Unless you can get genuine ones which are no doubt pricey.

No matter though, I am looking to fabricate something myself. My question is though what would a good force rating for the struts? Otherwise to measure it, should I try rigging up a winch in the garage and seeing how much weight pulls up the unassisted tailgate?

Link to comment
https://www.sau.com.au/forums/topic/426403-tailgate-struts/
Share on other sites

Where abouts are you?

there is a guy in Leo Street in Fawkner in Melbournes Northern suburbs.

he does tailgate struts, and can put them to what ever strength you want.

i have replaced the bonnet struts, i think it was 80 bux for both.

i also had him do my tailgate struts in the back of my bluebird wagon, had to lift around 65- 70 kg with all the sound deadening and mdf on it.

Gas Strut Recharging

11 Leo Street

(03)9357 2821

Link to comment
https://www.sau.com.au/forums/topic/426403-tailgate-struts/#findComment-6877755
Share on other sites

+1 worked fine for me. replacement not necessary unless they are physically rooted

Just get a mobile strut re-gas contractor out to recharge them?

It costs $80 and takes 20 mins. Save your time & effort for something useful. ;)

Link to comment
https://www.sau.com.au/forums/topic/426403-tailgate-struts/#findComment-6877848
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...