Jump to content
SAU Community

What Is 'too Much' Power For The Street?  

74 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

no 500kw car is going to be convenient or street friendly on a daily basis..and the price of fuel and wear and tear will soon have you buying a barina to get to work in....

doesnt mean it cant be done though, but even a 300kw car isnt always great on a daily basis...there are far more comfortable ways to get around...

Would I not drive on a street a 458, GT2, Veyron, Koeniggseg, Aventador? How much power do they have? Why would I not then drive a big HP GTR on a street just because my budget is lower?

Now what street are we talking about?

Now Mr Willis's private 'street' up on the Central Coast looks the goods.

Would I not drive on a street a 458, GT2, Veyron, Koeniggseg, Aventador? How much power do they have? Why would I not then drive a big HP GTR on a street just because my budget is lower?

Now what street are we talking about?

Now Mr Willis's private 'street' up on the Central Coast looks the goods.

According to JEM's latest Lambo tests they come from factory with bugger all..... Twin turbos should soon rectify that!

300 odd rwkw is getting closer to 'enough' for the street.

Would not go any bigger on a cam than what I have for a manual and regular street driving, too much overlap = a prick to drive smoothly through lower gears. Stalled auto = no problems.

I'd say the upper limit would be where you can't start opening it up without losing traction - tyre choice, suspension of course play a big part in it.

Same with big turboed imports - my old R32 was laggy and it sucked balls unless wringing its neck. 4.3:1 diffs did help with that though.

All depends on the car.. A 400rwkw Silvia is alot more silly than a 400awkw GTR.

Perfect daily street car would be a mild low 300kw GTR (-7s or -9s). Standard looking engine bay, relatively reliable, mid - high 11s quater mile on street tyres and not all that expensive to build. Once you wind up the power things tend to go bang..

In saying that low 300's does get boring :rofl:

Sif high 11s with them mods, i did that time on stock turbos and stock ecu ! 234kw

I hope to run a high 10 with that setup :yes: :yes: :yes: :yes: :yes: :yes:

Edited by sultanaz

My 26 GTS4 with 280 odd kw is more then enough on the street - to the point were i haven't even touched the high boost setting

Mind you its running RWD at current so i take it half easy - and is the first Forced Induction car i have driven so of course it feels quick to me

The power im getting used to it....

Hard question to answer but id say even 200kw is more then enough

My 26 GTS4 with 280 odd kw is more then enough on the street - to the point were i haven't even touched the high boost setting

Mind you its running RWD at current so i take it half easy - and is the first Forced Induction car i have driven so of course it feels quick to me

The power im getting used to it....

Hard question to answer but id say even 200kw is more then enough

Boost level and power level is still all controlled by the right foot :P

Boost level and power level is still all controlled by the right foot :P

I agree with that for sure and just because a car is 300, 400 or 500kw that does not mean it has to be driven as such

i think better wording then "Too much" is usable

I agree with that for sure and just because a car is 300, 400 or 500kw that does not mean it has to be driven as such

Yep, its the good thing about modern turbo cars :yes: Can be driven daily without knowing its got big power! Mine is smooth as on the street, its only the idle that gives it away now!

Yep, its the good thing about modern turbo cars :yes: Can be driven daily without knowing its got big power! Mine is smooth as on the street, its only the idle that gives it away now!

I hear you brother! the straight exhaust with single hooker muffler can be quite loud haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
×
×
  • Create New...