Uas R33 Gtst Brake Adapters

[Greekos]

Hey guys

how many of you are running these on your r33 gtst with the gtr rotors, i have searched but not found any definitive answers, so what mods did you have to make/ any issues with pad overhang and if you have any photos that would be great!!!

thanks Guys

[GTSBoy]

You do know that these are to suit R32/Z32 calipers onto 324mm rotors, not the R33 calipers, yes?

[hardsteppa]

i was under the impression they made a few different types, with an option for the r33 gtstst>gtr as per OP...although the design didn't look as good.

[Burgz32]

They make them to suit most early skyline.

so yes they do a R33 GTsT caliper to suit the 324m rotor.

I fitted a pair to a R33 GTst not long ago, had to nibble a little bit off the caliper it's self, and you get around 1mm of pad over hang.

all in all a good convertion.

might be worth holding out, as GK tech are almost finished with there caliper bracket, and at $99 they'll be a lot cheaper.

Cheer Burgz

[DaveO74]

Good upgrade, have had them on mine for over a year now, I was one of the lucky ones who didn't have to shave the 4mm from the the caliper. But you will have to butcher the dust/heat sheild thingy.

[hardsteppa]

what about this badbwoy right here

http://www.ebay.com.au/itm/NASHIN-345mm-FRONT-BRAKE-ROTOR-DISC-UPGRADE-KIT-SKYLINE-/130919209312?pt=AU_Car_Parts_Accessories&hash=item1e7b649960

[Greekos]

thanks for the reply's, i bought them as i wanted to upgrade the brakes without spending too much.

[DaveO74]

They work a treat mate, you will be happy.

[Greekos]

sweet any issues with the pad overhang

[dori34]

GKTECH are in process of making the dogbones for GTST to run GTR rotors.

starting special at $99.

check out their facebook page.

edit: just noticed burgz32 beat me too it

[Roy]

They've been coming for how many months/years?

[simpletool]

And.....they're still coming...somewhere. I bought the adapters from UAS, didn't need any butchering, just bent the dust shield back about 10mm. Also needed 1.5mm of shim to centre the caliper.

I used the ATTKD 2-piece rotor with curved vanes. They're fixed mount 2-piece but well priced/featured compared to other 324mm rotors. Yet to drive on them though.

They also still fit nicely with the typical HEL braided lines.

[GKTECH]

They've been coming for how many months/years?

I'm not sure what you mean by years but we develop products based on demand and time and development time are limited. If you follow us on Facebook or Instagram you'd see that the R33 brake caliper adapters to R33 GTR rotors are almost finished. We'll have a pre buy starting soon at $99/pair.

[CLNSKY]

I'll be joining that pre buy list!

[GTSBoy]

I'll probably join that list too. But ferchrissake.....don't just announce your stuff on Facebook. I am a male. I have testicles. Therefore I have no use for facebook. Many of us give no shit for that emo weenie social networking crap.

[hardsteppa]

i concur. $$ ready for a pair of these bad boys but i don't book so ready to send a signed blank cheque GKTech's way as soon as needed....

but seriously i have money.

[CLNSKY]

Gather up some buyers on SAU, i'm pretty sure we will have a couple interested, Group buy?

[hardsteppa]

price is fine, I just want the damn things made if it takes a group buy to do that i"m in

Edited September 5, 2013 by hardsteppa