Jump to content
SAU Community

Recommended Posts

I have recently bought a 96 import r33 gtst and i am having some problems, firstly being boost, the stock boost gauge just barely gets past 0 at the high end of the rev range (cant see exactly because tacho is not working atm which is another story).

The other thing which could be related is there is a high pitch whistle noise which doesnt sound right at all which sounds like its coming from around the turbo when it gets to high revs. I cant see any apparent split hoses, could this be a leak on the manifold side?

Any advise would be much appreciated before i start dismantling on the weekend.

Hmm no its a different noise, it wont get close to boost till high revs and then it starts making the noise and will get to maybe +1 mm/hg at the most.

Ill have to get a vid of it tomorrow and post it up.

No the car wasn't exactly cheap. Tonight i disconnected the bottom vacuum line from the stock solenoid and i seemed to make 6-7 psi, was about half way from 0 to 7 mmhg. I also got a clip of the noise:

Sounds like a fat exhaust leak. Check for obvious visual signs. You should see black carbon deposits n shit from where the leak is. Since you said you aren't making boost, I'd check for the obvious signs around the manifold to turbo gasket. Then check turbo to dump pipe. Mine made that exact same sound. The metal gasket between the turbo and dump was split from reuse. Don't get those paper kind of gaskets, those two shiny things on the black shit. They are shit, piss weak and don't last. Get the proper metal gasket. I don't think a failing turbo would emit that sound. My car when I got it had surprisingly loose mani to head nuts. I tightened those up quick fast.

hmm, i was going to pull it all apart this weekend but i cant get the replacement gaskets till after monday through nissan. Thanks for the info, might pull a few things out of the way and have a look for signs of a leak as you say. Not that i can see it very well but i think there is a broken stud on the manifold to head too.

It sounds to me that it's not an exhaust leak. Probably the Turbo is gone but also check the Blowoff valve to see if it's fallen loose. This happened to me and turned out the BOV had given way over time.

  • 3 weeks later...

All the nuts on the turbo to manifold were loose, i tightened them up and ordered a new gasket. Would this be enough to cause complete lack of boost or is it likely to have a boost leak somewhere as well? car seems to be running very rich especially at idle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • Let's just fix the problem by f**king the rest of the gearbox.
    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
    • I should video mine, will prob do it tomorrow    Between 1st and 3rd, you could fit another two gears. That is how loose and wobbly it is   horrible:(
×
×
  • Create New...