Jump to content
SAU Community

Recommended Posts

Hey guys I have an R34 GTT coupe automatic. Was just wondering what you guys use/prefer as engine, power steering, transmission oils (brand/type) etc

I am curious as to what you guys think is best. The car goes through periods of everyday use and also theres times where it doesn't get driven for a week or so.

Also any other general tips for good maintenance (like letting the car warm up in the morning etc) would be great!

Thanks!

Josh

Link to comment
https://www.sau.com.au/forums/topic/426903-oil-types-maintenance/
Share on other sites

Personally I only use Royal Purple 10w40 engine oil, but that's just a personal thing. Lots of guys using Penrite, Motul, Gulf Western, etc. Weight of the oil you use depends on how many km's your engine has on it. Power steering I just use the OEM Nissan stuff, and I've got a manual gearbox so can't help you with transmission fluid.

As for maintenance, not a lot you need to do other than check fluid levels etc. every so while. The car should be fine sitting for a week or two, mine sits for months at a time haha. If it is going to be sitting for longer than two weeks without getting a decent drive, I recommend getting a 3-stage battery charger to ensure you get a good life out of your battery.

Don't let the car warm up in the morning by letting it idle, that's silly. It takes longer for the engine to warm up this way, and you need to warm up your gearbox and diff anyway. Plus you annoy your neighbors. Just drive the car gently for the first 10-15 minutes or so, depending on how cold it is. If you plan on doing some track work at any stage, some gauges (water/oil temp, oil pressure, etc.) wouldn't go astray and I find mine extremely useful. Otherwise, just drive the car like you would any other car, and service it regularly :thumbsup:

Edited by Hanaldo

Don't let the car warm up in the morning by letting it idle, that's silly. It takes longer for the engine to warm up this way, and you need to warm up your gearbox and diff anyway. Plus you annoy your neighbors.

+ your family, if your car is parked at the front of the house where the bedrooms are hahaha but i always find it amusing

  • 2 weeks later...

With warming up the engine. I would say to let it sit for a minute or two after startup so oil pressure builds, coolant can circulate, etc. Like not driving it immediately after the engine starts.

Oil I would say a decent 10W-40 is fine. Nothing super cheap, but you don't have to go super expensive either. Used Nulon Full Synthetic10W-40 previously and just put in Penrite 10 Tenths 10w-40, Penrite is not giving any lifter noise on startup whereas had some noise for a few seconds with the Nulon. Slightly thicker if the engine is older/using a lot of oil or used for track.

1 for Penrite

Warm up times is subject to much debate, lol.

As the guys have said, give it a minute or two to get some oil pressure, but also ease the box and diff in as well.

When I was daily-ing my Cefiro, I'd start the car, chuck my bag, phone, wallet etc on passenger seat, jump in, find some tunes/check Facebook, that'd kill about a minute or so, then roll it out the driveway, pop it into second and idle down my street (about 100-200 metres @ 20-30ish kmph??), then be gentle and stick below 2500rpm for the next couple of backstreets, then keep it under 4000rpm, then by the time I hit the highway it was up to temp.

Edited by Nic_A31

Mine takes ages to hit temp even while driving. Like i'm talking a good 15mins+. I think the thermostat may need replacing.

TBH, I usually warm the engine up to about 40-50 degrees with some throttle blips every couple mins before taking off. Take it easy, like no positive boost and <3000rpm, until oil pressure drops so i know oil is up to temp.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • full send the cnut, do this   fark the wrapping and/or stick on siet.
    • Just had a look, they don't. Fuelling on the base map is purely alpha-N, and the ignition table is MAP. Remember it's just a base map to get the car moving  
    • Hi everyone, I’m Dave from Canberra. Here's a few pics of my 1992 R32 GTST coupe which I imported back in 2006. Only mods so far are HKS Hi-power cat back exhaust, K&N filter, ATC Volanti steering wheel, Pioneer stereo, amp and sub. This was my daily driver up until 2015 and sadly hasn’t been driven at all in the last 5 years due to marriage, work, and kids taking up most of my time and spare cash.As such its in need of a bit of TLC and one of my goals for this year is to get it back to running condition and maybe look into club/historic rego. I’ve joined SAU so I can ask a few questions along the way (although I promise to google Current Problem +SAU beforehand!)
    • From talking to the mx5 guys the NC doesn't actually need bonnet vents like the earlier NA and NB models, due to a better designed cooling system and undertray design There's plenty of them used as street cars and weekend track toys running anywhere from around 170 to 250kw with stock non vented bonnets, I initially was going to get some bonnet vents, but, as they are not actually required, I'll put vents on hold for a while and just monitor temps, though I do need to get something to actually monitor engine oil temps though, coolant temp can be pulled from the OBD2, but the oil gauge in the car is not actual oil temp, it is only a calculation based off coolant temp and RPM ☹️ They do recommend upgrading the radiator, which I have already done with a triple pass, and the only other thing they recommend for a street car is heat management, like I talked about above to protect bits in the engine bay from radiant heat, and to either replace the nearly 20 year old plastic coolant expansion tank, which I have done, or get a aftermarket alloy jobbie for some bling They did also say that if I wanted to track the car on occasion a oil cooler and sump baffle would be required, and as I already have had a sump baffle installed when the engine was out......... I'm going to get a oil cooler with a thermostat....... just in case I do eventually track the car, but probably not, but still maybe...🤪
    • Finally had these painted and fitted and pleased with the result. also managed to source 400R fender badges.    
×
×
  • Create New...