Jump to content
SAU Community

Recommended Posts

This was a response to a couple of questions one of the club members sent me a while back :-)

First, the Martini. Be warned, if you are not a big drinker a Martini is a BAD starting place for real cocktails. They are pure alcohol with NOTHING to cut the flavour except a little melted ice. Great if you love that sort of thing but it can take some getting used to.

Doing it right it should be two shots of gin, one shot of dry vermouth and garnished with two unstuffed green olives. You STIR a martini - James Bond is an idiot. Get a quality Gin, Bombay Sapphire as a minimum, Tanqueray is better, to make it. Don't go above these in price as Gin is an acquired taste and you may not like it. Quality Vermouth is VERY hard to come by so Cinzano is fine (and is dirt cheap.) Chill your serving glass down with ice in it (or put it in the freezer for a short time.) While it is chilling add the two shots of gin and shot of vermouth into a large glass (we use 28 oz glasses called Boston Glasses in bars) and top with ice. You add ice to the spirits, not spirits to the ice - prevents excessive melting. Use a thin spoon/knife/skewer/whatever and slide it down the side of the glass and use it to stir/twirl the ice around in the glass. The idea is to get all the ice moving in a smooth, circular motion -

is a good example. Stir until the outside of the glass gets nice and frosty and condensation starts to form. Empty your serving glass of ice/melted water and strain the martini into it, there should be no ice in the serving glass. Stick 2 olives on a long toothpick and plop them into the martini. And there you have it

There are a thousand different variations on this method but that is the traditional method. Alter quantities, garnish and stir time to suit taste (more stirring = colder and more watered down, great for inexperienced drinkers.) Personally I drink mine a bit more like Winston Churchill, I add extra gin and raise my glass in a toast to my dusty bottle of unused vermouth, but it's each to their own. Anything with a fruit name (e.g. Appletini) is in no way related to a martini and just had an unimaginative bartender who created it and couldn't think of a better name.

Then we get on to Vodka Martini's and that is just a whole different kettle of fish best left for another day.

Phew, now that the easy question is done on to the complex question. What makes a good scotch.

Firstly, unless you come across a bottle of 21-year-old Royal Salute or Hibiki 17-year-old DO NOT DRINK BLENDED WHISKY!!!! Blended whisky is rubbish. Even 'good' blended whisky, like Johnny Walker Blue, is crap and over priced crap at that. You can do SO much better than them. Johnny Blue is currently around $200 a bottle in most decent bottle shops and I could give you a list of whiskies as long as my belly is round that cost half the price and kick it all around the bar all day, every day. Blended whisky is what you use if you want a scotch and coke. Real whisky is always a single malt with some oddball exceptions like solera tun whiskies but that is another lesson for another day.

Secondly, Scotch is highly personalised and it takes a LONG time to truly understand the differences and develop your personal taste. What's good for me may be rubbish to you and vice versa. Get out there and try stuff. If you can handle it, drink it neat (by its self, no ice and no mixer) with just a TINY dash of water mixed in. If that is too rough, drink it on the rocks. If that is still too rough it means that whatever you are drinking is either horse piss or you just don't like it. Move on to another whisky and try again. Talk to your bartender, if they are worth two grains of salt they will be able to at least tell you the region the whisky is from. You will start to get an idea of what regions make what sort of whisky and find similar ones that you may enjoy.

As for regions, Scotland is divided into 4 main areas when talking about whisky. The Lowland, The Highland, Speyside and the Isle of Islay. Each region has it's own unique flavours and styles.

The Lowlands - The Lowlands region lies south of an imaginary line drawn from the Clyde estuary to the Tay estuary. Whiskies from the Lowlands tend to be soft and light in character. They often display very malty, grassy characteristics and subtle delicate aromas. Examples include Glenkinchie, Blandoch and Auchentoshan.

The Highlands - Moving north of the imaginary line takes us in to the Highland region. The region includes most of the rest of Scotland, with the exception of the Island of Islay and Campbeltown, and thus its malts vary greatly in character. Generalisations about the Highland region are less valid, as its whiskies will range from dry to sweet and some even have a touch of smoke and peat. Examples include Glenmorangie, Blair Athol and Talisker.

Speyside - Technically Speyside lies within the Highland region. It is home to approximately half of Scotland's malt whisky distilleries. This small area of land located to the north west of Aberdeen produces mellow, sweet, and particularly fruity malt whiskies. Examples include Glenfiddich, Glenlivet and Macallan.

Islay - Located in the Inner Hebrides, the small Island of Islay is often called 'Whisky Island' given its concentration of eight distilleries. The island produces very distinct malts, generally heavily peated and smoky in taste. Examples include Bowmore, Ardbeg and Laphroaig.

As a new whisky drinker I?d recommend looking for Speyside Malts to begin with. They tend to be easier to find and are friendlier to new drinkers. Glenfiddich is a great whisky to start with as it is easy to drink and is a nice, middle of the road flavour and is reasonably priced. Macallan is a great whisky to expand your palette on as it ranges in price and quality by large degrees, the 10-year-old fine oak is a great entry point (around $70 a bottle) and it goes up from there. I personally think the 25-year-old Sherry Oak is one of the best whiskies I have ever had but it is VERY expensive, around $500 a bottle.

Lowland malts tend to be hard to come by so unless you get very lucky I wouldn't bother going looking for them. Highland malts can be all over the place in terms of flavours so try some different ones out. The ones I listed above are good starting points.

Islay Malts are the big boy whiskies. HUGE flavours, heavy on peat and smoke. They taste like a glass of rich earth that someone put into a smoking hood for a week before blending down to be drunk. This is where you go to if the other whiskies lack the balls to put hair on your chest. Definitely not for everyone but these are my go to malts. I try keeping a bottle of Laphroaig 10 year old at home whenever my meagre uni student lifestyle allows for it. A close second for me is Oban.

So yeah, there is the VERY short intro to whisky knowledge from me ☺ Best bet is simply to get out there and try stuff. All the knowledge in the world comes to squat if you don't actually try them. Another time we'll talk about the other nations whisky/whiskey types.

  • Like 1

Jameson and Dry they best way to finish off the day.

As for scotch, Cragganmore 12 is nice but my favorite is glenmorangie port cask (Quinta Ruban), but anything speyside is quite drinkable.

I agree the Islay whiskys are very smokey (ie laphroaig) and peaty, and they can git tae fook.

I lived in scotland for 12 months and drank quite a few drams whilst I was there, and there are so many fantastic tasting whiskys that are made by boutique distilleries, and are quite cheap to buy, the only issue is that they only sell it over in Scotland :(.

Another think I find is that people who only drink Vodka have extremely bad taste :P

lemons?

or taunt it for a couple of years....

haha. i uses lemon juice lemonade, and a small amount of sugar then blend it with ice.

however dem fat maryqueens have sour mix over there which, no matter how hard i try i cannot replicate!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...