Jump to content
SAU Community

Gt3582R Response On A 3L Engine

Scorgie97

By Scorgie97,
in Engines & Forced Induction

 Share

Recommended Posts

Scorgie97 Newbie

Scorgie97

Posted
Posted

Yes I know there are many threads on this topic, but I would appreciate some specific info on what rpm do you start seeing boost with a gt3582r on a DOHC rb30. If you have had any experience with this setup your knowledge would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/427090-gt3582r-response-on-a-3l-engine/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Thread closed. Believe it or not, but since SAU started more than 7 years ago, this topic has been discussed before.

Please use the search function in future. It may be found here:

http://www.skylinesaustralia.com/forums/index.php?app=core&module=search&search_in=forums

While we understand that it can be frustrating to have your thread closed - Please consider that other members may feel it to be disrespectful and selfish of you to post a simple question, without using the search feature to review the wealth of information provided by said members over the years.

If you still feel that this action is unjust, then please PM me and we can discuss it further.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kyer32
      R32 gtst speedo out by 10kph

      By Kyer32 · Posted

      Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
    • Kyer32
      R32 gtst speedo out by 10kph

      By Kyer32 · Posted

      so I need a new speedo cable 
    • tsuokun
      R34 GTT RB rough idle problem with weird RPM gauge fluctuations

      By tsuokun · Posted

      Throwing my spoon to the soup here a bit.  When I installed a 044 back in 2012, along with the direct power mod, the car became very difficult to start. To a point I burned one starter motor as I was late for work and tried to get the thing going. With some tuning and careful use of gas pedal when cranking it became bearable. Trying to make this short as possible, but the 044 died after 2-3 years, after which I went with an AEM 320lph pump, which also died after about 4 years to my dismay. After that I went with a Nismo pump, and while trying diagnose an emissions problem, I noticed for the first time that my fuel pressure was 5bar/72psi on idle, and that removing the vacuum line did nothing. After monitoring the situation, and removing the direct power feed and going back to FPCM in attempts to remedy it, I noticed there was fuel in the pressure regulator vac line. Kept the FPCM, installed AEM external regu and the car became sooo much better in every way, including starting. And I had driven it like it was for 11 years.. Anyway, I agree these are likely two different problems, and the FP problem you just haven't noticed before. I do not know much about haltecs, but what first came to mind was the CAS, which probably is not there any more. So how is the wiring from haltec to gauge cluster? How is the battery voltage and alternator?
    • niZmO_Man
      R32 gtst speedo out by 10kph

      By niZmO_Man · Posted

      Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • niZmO_Man
      Rv37 400r questions

      By niZmO_Man · Posted

      +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
×
×
  • Create New...